{"data":{"id":"us/7-cfr-993.602","jurisdiction":"us","citation":"7 CFR 993.602","heading":"Maximum tolerances.","body":"In lieu of the provision prescribed in I C of § 993.97 that the tolerance allowances prescribed therein shall be on a weight basis, the tolerance allowance percentage for each defect or group of defects in I C of § 993.97 shall be derived by dividing the number of prunes in the applicable sample affected with the applicable defect(s) by the total number of prunes in such sample.","path":["Title 7—Agriculture","Subtitle B—Regulations of the Department of Agriculture","CHAPTER IX—AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE","PART 993—DRIED PRUNES PRODUCED IN CALIFORNIA","Subpart F—Grade Requirements"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-7.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:24:01Z","sha256":"92542687008c073a2d4d9d9db822f2fcbb0e0d91d5c790475c292bc4f9795b33","source_id":"us-cfr","stale":true,"prev":"us/7-cfr-993.601","next":"us/7-cfr-996.1"},"notice":"GroundRules: Original legal text. Not legal advice."}