KRS 280.130: Mooring of ferry boats -- Docks -- Aprons.

Each ferry company shall, where it is practicable, maintain at all times at each landing a

dock, durably constructed and of sufficient size to accommodate two 2 1/2 -ton trucks or

two 7-passenger automobiles. The dock shall be securely moored to the shore and shall be

provided with iron bars or pipes securely fastened to strong, upright, well -braced posts,

the bars or pipes to be kept in place at all times except when the boat is secured to the

dock. The construction of the dock, mooring, bars and fastenings shall be strong enough

to resist the impact of cars or trucks under reasonable circumstances. Ferry boats using

aprons, where it is not practicable to use docks, shall be moored to 3/4 -inch iron rings

secured to rods of iron of the same size, with splay f oot and imbedded in 8-inch concrete

roadway. The boat shall have a chain of Swedish iron of 5/8 -inch size securely bolted to

each gunwale, and the boat shall be moored by fastening the chains to the iron rings. The

type of dock or apron shall be subject to the approval of the Department of Highways.