GroundRules
Miss. Code Ann. § 75-31-221: Miss. Code Ann. § 75-31-221
Where this section sits in the code
- MS Code
- Title 75
(1) Minimum tolerance values. On all farm milk tanks, the maintenance and acceptance tolerances applied shall not be smaller than one-half ( 1 / 2 ) the value of the minimum graduated interval on the gauge rod or surface gauge.
(2) Basic tolerance values. Basic maintenance and acceptance tolerance on underregistration and overregistration shall be as follows: (The error, at any liquid level, of a tank to which the tolerance is applied, is the difference between the gallonage shown for that level on the gallonage chart and the corresponding gallonage determined by test.) Basic maintenance and acceptance tolerances, on underregistration and on overregistration on farm milk tanks are not more than 1 / 32 of an inch, if graduated in inches, or one (1) millimeter, if graduations are in centimeters.
Collected 2026-09-17T20:49:39Z. Source file · JSON
Compilation CC BY 4.0, Open US Law (Vaquill AI). GroundRules uses only the releases published under CC BY 4.0: from v2026.09 the compilation is licensed CC BY-NC 4.0, and GroundRules does not use those releases. Each affected row names its release in its vintage label. GroundRules parsed and filtered the compilation to retain enacted text. Source · License
Mississippi electronic product files were republished by Public.Resource.Org under a public-domain dedication. GroundRules uses enacted text from Release 78 only as a labeled supplement to the newer Open US Law rows. Source