GroundRules
N.Y.C. Admin. Code § BC 3502: Section BC 3502: Standards
Where this section sits in the code
- New York City Administrative Code
- Title 28
- Chapter 7: New York City Building Code
AA
Aluminum Association 1525 Wilson Boulevard, Suite 600 Arlington, VA 22209
Standard reference number
Title
Referenced in code section number
ADM—15
Aluminum Design Manual: Part 1—A Specification for Aluminum Structures
1604.3.5, 1705.33.1, 2002.1
ASM 35—00
Aluminum Sheet Metal Work in Building Construction (Fourth Edition)
2002.1
AAMA
American Architectural Manufacturers Association 1827 Waldon Office Square, Suite 550 Schaumburg, IL 60173
Standard reference number
Title
Referenced in code section number
1402—09
Standard Specifications for Aluminum Siding, Soffit and Fascia
1404.5.1
AAMA/WDMA/CSA 101/I.S.2/A440—11
North American Fenestration Standard/Specifications for Windows, Doors and Skylights
1709.5.1, 2405.5
AASHTO
American Association of State Highway and Transportation Officials 444 N Capitol Street NW, Suite 249 Washington, DC 20001
Standard reference number
Title
Referenced in code section number
T318—15
Standard Method of Test for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying
1905.6.2.1, 1905.6.3.6
ACI
American Concrete Institute 38800 Country Club Drive Farmington Hills, MI 48331
Standard reference number
Title
Referenced in code section number
216.1—14
Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies
Table 721.1(2), 722.1
301—10
Specification for Structural Concrete
1812.1.1, 1905.2.4, 1905.3.5.2, 1905.6.3.7
306R—10
Guide to Cold Weather Concreting
Table 1904.4.2
318—14*
* As modified in Section 1908
Building Code Requirements for Structural Concrete
406.7.3, 722.2.4.3, 1604.3.2, Table 1613.5, Table 1705.2, Table 1705.3, 1705.3.1, 1705.37, 1809.5.7.2, 1809.6, Table 1810.2.13, Table 1810.8, 1810.9.1.1, 1810.9.2, 1810.9.2.1, 1811.6.3.2, 1811.6.3.2.2, 1812.1.2.5.1, 1812.1.2.5.2, 1812.7.4.1, 1812.8.3, 1812.8.4, 1901.2, 1901.3, 1901.5, 1902.1, 1903.1, 1903.5, 1903.6, 1903.6.1, 1903.6.2, 1903.7, 1903.8, 1904.1, 1904.2, 1904.3, 1904.4, 1904.4.1, 1904.5, 1905.1, 1905.1.1, 1905.1.4, 1905.2, 1905.3, 1905.4, 1905.5, 1905.6, 1905.6.5.5, 1905.6.6, 1905.8.3, 1905.11.3, 1906.1, 1906.2, 1906.3, 1906.4, 1907.1, 1907.2, 1907.4.1, 1907.5.2.1, 1907.5.2.2, 1907.6, 1907.7.1, 1907.7.2, 1907.7.3, 1907.7.4, 1907.7.5, 1907.7.6, 1907.8, 1907.9, 1907.10, 1907.11, 1907.12, 1907.13, 1908.1, 1908.1.1, 1908.1.2, 1908.1.3, 1908.1.4, 1908.1.5, 1908.1.6, 1908.1.7, 1908.1.8, 1908.1.9, 1908.1.10, 1909.1, 1912.2, 1912.3.1, 2108.3, 2206.1, 2206.3, 3305.3.2
530—13
Building Code Requirements for Masonry Structures
1705.4.1, 1705.4.3
530.1—13
Specifications for Masonry Structures
Table 1705.4.1, Table 1705.4.3, 2105.1
AISC
American Institute of Steel Construction One East Wacker Drive, Suite 700 Chicago, IL 60601-18021
Standard reference number
Title
Referenced in code section number
ANSI/AISC 303—16
Code of Standard Practice for Steel Buildings and Bridges
2203.1, 2205.3.1
ANSI/AISC 341—16
Seismic Provisions for Structural Steel Buildings
1705.2.4.1, 1705.2.4.2, 1705.2.5, 1705.2.5.2, 2205.2.1.1, 2205.2.1.2, 2205.2.2, 2206.2.1, 2206.3
ANSI/AISC 360—16
Specification for Structural Steel Buildings
722.5.2.2.1, 1604.3.3, Table 1705.2, 1705.2.3, Table 1810.8, 2203.2, 2205.1, 2205.1.1, 2205.2.1.1, 2205.3, 2205.3.2, 2205.3.3, 2206.1, 2206.3, 3305.2
AISI
American Iron and Steel Institute 25 Massachusetts Avenue, NW Suite 800 Washington, DC 20001
Standard reference number
Title
Referenced in code section number
AISI S100—16
North American Specification for the Design of Cold-formed Steel Structural Members
1908.1.5, 2203.1, 2203.2, 2210.1, 2210.2
AISI S220—15
North American Standard for Cold-formed Steel Framing-Nonstructural Members
2203.1, 2203.2, 2211.2, Table 2506.2, Table 2507.2
AISI S230—15
Standard for Cold-formed Steel Framing-Prescriptive Method for One- and Two-family Dwellings,
1609.1.1, 1609.1.1.1, 2211.1.2
AISI S240—15
North American Standard for Cold-Formed Steel Structural Framing, 2015
Table 1705.2.6, 2203.1, 2203.2, 2211.1, 2211.1.1.1, 2211.1.3.3, Table 2603.12.1, Table 2603.12.2
AISI S400—15/S1—16
North American Standard for Seismic Design of Cold-formed Steel Structural Systems, 2015, with Supplement 1, dated 2016
1604.3.3, Table 1613.5
AMCA
Air Movement and Control Association International 30 West University Drive Arlington Heights, IL 60004
Standard reference number
Title
Referenced in code section number
540—13
Test Method for Louvers Impacted by Wind Borne Debris
1609.1.2.1
ANSI
American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036
Standard reference number
Title
Referenced in code section number
A10.3—06*
* As modified in Section 3311.4
Safety Requirements for Powder-actuated Fastening Systems
3311.3, 3311.4, 3311.4.1, 3311.4.2, 3311.4.3, 3311.4.4, 3311.4.5, 3311.4.6, 3311.4.7, 3311.4.8, 3311.4.9, 3311.4.10, 3311.4.11, 3311.4.12
A10.4—16
Safety Requirements for Personnel Hoists on Construction & Demolition Sites
3001.2, 3010.3
ANSI/ASSP A10.11—10*
* As modified in Section 3308.6.2
Safety Requirements for Personnel and Debris Nets
202 (structural net), 3302.1, 3308.6.2, 3308.6.2.3, 3308.6.2.4, 3308.6.2.5, 3308.6.2.6, 3308.6.2.7, 3308.6.2.8, 3308.6.2.9, 3308.6.2.10, 3308.6.2.11, 3308.6.4
A13.1—2007
Scheme for the Identification of Piping Systems
415.11.6.5, 903.6, 905.11
A108.1A—99
Installation of Ceramic Tile in the Wet-set Method, with Portland Cement Mortar
2103.2.3
A108.1B—99
Installation of Ceramic Tile, quarry Tile on a Cured Portland Cement Mortar Setting Bed with Dry-set or Latex-Portland Mortar
2103.2.3
A108.4—99
Installation of Ceramic Tile with Organic Adhesives or Water-cleanable Tile-setting Epoxy Adhesive
2103.2.3.6
A108.5—99
Installation of Ceramic Tile with Dry-set Portland Cement Mortar or Latex-Portland Cement Mortar
2103.2.3.1, 2103.2.3.2
A108.6—99
Installation of Ceramic Tile with Chemical-resistant, Water Cleanable Tile-setting and -grouting Epoxy
2103.2.3.3
A108.8—99
Installation of Ceramic Tile with Chemical-resistant Furan Resin Mortar and Grout
2103.2.3.4
A108.9—99
Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout
2103.2.3.5
A108.10—99
Installation of Grout in Tilework
2103.2.3.7
A118.1—16
American National Standard Specifications for Dry-set Portland Cement Mortar
2103.2.3.1
A118.3—13
American National Standard Specifications for Chemical-resistant, Water-cleanable Tile-setting and -grouting Epoxy and Water Cleanable Tile-setting Epoxy Adhesive
2103.2.3.3
A118.4—16
American National Standard Specifications for Latex-Portland Cement Mortar
2103.2.3.2, 2103.3.2.4
A118.5—99
American National Standard Specifications for Chemical Resistant Furan Mortar and Grouts for Tile Installation
2103.2.3.4
A118.6—10
American National Standard Specifications for Cement Grouts for Tile Installation
2103.2.3.7
A118.8—99
American National Standard Specifications for Modified Epoxy Emulsion Mortar/Grout
2103.2.3.5
A136.1—08
American National Standard Specifications for Organic Adhesives for Installation of Ceramic Tile
2103.2.3.6
A137.1—12
American National Standard Specifications for Ceramic Tile
202 (porcelain tile)
A190.1—17
Standard for Wood Products - Structural Glued Laminated Timber
2303.1.3, 2306.1
A208.1—16
Particleboard
2303.1.8, 2303.1.8.1
E1.42—18
Entertainment Technology - Design, Installation, and Use of Orchestra Pit Lifts
3001.2
E1.46—18
Standard for the Prevention of Falls from Theatrical Stages and raised Performance Platforms
3001.2
Z97.1—14
Safety Glazing Materials Used in Buildings—Safety Performance Specifications and Methods of Test
2406.1.2, 2406.2, Table 2406.2(2), 2406.3.1, 2407.1, 2407.1.4.1, 2408.2.1, 2408.3, 2409.2, 2409.3, 2409.4.1
Z535.1—06
Safety Colors
1024.3.1, 1025.6.2
Z535.2—11
Environmental and Facility Safety Signs
K1
APA
APA-Engineered Wood Association 7011 South 19th Tacoma, WA 98466
Standard reference number
Title
Referenced in code section number
ANSI/A 190.1—17
Standard for Wood Products - Structural Glued Laminated Timber
2303.1.3, 2306.1
ANSI/APA PRP 210—14
Standard for Performance-Rated Engineered Wood Siding
2303.1.5, 2304.7, 2306.3
ANSI/APA PRR 410—16
Standard for Performance-Rated Engineered Wood Rim Boards
2303.1.13
APA PDS—12
Panel Design Specification
2306.1
APA PDS Supplement 1—14
Design and Fabrication of Plywood Curved Panels
2306.1
APA PDS Supplement 2—14
Design and Fabrication of Plywood-lumber Beams
2306.1
APA PDS Supplement 3—14
Design and Fabrication of Plywood Stressed-skin Panels
2306.1
APA PDS Supplement 4—14
Design and Fabrication of Plywood Sandwich Panels
2306.1
APA PDS Supplement 5 —14
Design and Fabrication of All-plywood Beams
2306.1
ANSI/APA PRG 320—18
Standard for Performance-Rated Cross-Laminated Timber
Table 1705.5.6, 2303.1.4
EWS R540—13
Builders Tips: Proper Storage and Handling of Glulam Beams
2306.1
EWS S475—16
Glued Laminated Beam Design Tables
2306.1
EWS S560—14
Technical Note: Field Notching and Drilling of Glued Laminated Timber Beams
2306.1
EWS T300—16
Glulam Connection Details
2306.1
EWS X440—08
Product Guide: Glulam
2306.1
API
American Petroleum Institute 200 Massachusetts Avenue NW Suite 1100 Washington, DC 20001-5571
Standard reference number
Title
Referenced in code section number
API Specification 5CT—2018
Casing and Tubing, 10th Ed, June 2018
1811.7.1.2
API Specification 5L—2018
Line Pipe 46th Ed, April 2018
1811.7.1.2
API Recommended Practice 13B-1—2019
Recommended Practice for Field Testing Water-based Drilling Fluids, 5th Ed, May 2019
1812.1.1.2.3
APSP
The Association of Pool & Spa Professionals 2111 Eisenhower Avenue Alexandria, VA 22314
Standard reference number
Title
Referenced in code section number
ANSI/APSP 7—06
Standard for Suction Entrapment Avoidance in Swimming Pools, Wading Pools, Spas, Hot Tubs and Catch Basins
3109.3.1.1
AREMA
American Railway Engineering and Maintenance-of-Way Association 10003 Derekwood Lane, Suite 210 Lanham, Maryland 20706
Standard reference number
Title
Referenced in code section number
AREMA—2020
Manual for Railway Engineering
1607.10.5
ASABE
American Society of Agricultural and Biological Engineers 2950 Niles Road St. Joseph, MI 49085
Standard reference number
Title
Referenced in code section number
EP 484.2 June 1998 (R2008)
Diaphragm Design of Metal-clad, Wood-frame Rectangular Buildings
2306.1
EP 486.2 OCT 2012
Shallow-post Foundation Design
2306.1
EP 559.1 2016
Design Requirements and Bending Properties for Mechanically Laminated Wood Assemblies
2306.1
ASCE/SEI
American Society of Civil Engineers Structural Engineering Institute 1801 Alexander Bell Drive Reston, VA 20191-4400
Standard reference number
Title
Referenced in code section number
5—13
Building Code Requirements for Masonry Structures
1405.6, 1405.6.2, 1405.10, 1705.4.1, Table 1705.4.1, 1705.4.3, Table 1705.4.3
6—13
Specification for Masonry Structures
1405.6.1, Table 1705.4.1, Table 1705.4.4, 2105.1
7—16*
* As modified in Chapter 16
Minimum Design Loads and Associated Criteria for Buildings and Other Structures with Supplement No. 1
202 (floodproofing, dry; maximum considered earthquake geometric mean (MCEG) peak ground acceleration; risk-targeted maximum considered earthquake (MCER) ground motion response acceleration), 909.10.6, 1602.1, 1604.3, Table 1604.3, 1604.4, 1604.5, Table 1604.5, 1604.5.2, 1604.8.2, 1604.9, 1605.1, 1605.2.1, 1605.3.1, 1605.3.1.2, 1607.8.1, 1607.8.1.1, 1607.8.1.2, 1607.9, 1608.1, 1608.3, 1609.1.1, 1609.1.2, 1609.1.6.1, 1609.1.6.2, 1609.5.3, 1609.7.1, 1611.2, 1612.1, 1613.1, 1613.3.1, 1613.3.2, 1613.3.3, 1613.3.4.1, 1613.3.4.1.1, 1613.3.5, 1613.3.5.1, 1613.3.5.2, 1613.4, 1613.5, Table 1613.5, 1613.6, 1614.1, 1705.12, 1705.13, 1801.2.1, 1810.9.1.1, 1810.9.2.2, 1810.9.2.4, 1811.6.3.2.1, 1811.6.3.2.2, 1816.2.1, 1901.2, 1905.1.1, 1905.1.2, 1905.1.8, 1908.1.1, 1908.1.2, 1908.1.5, 1908.1.6, 2209.1, 2210.2, 2304.6.1, Table 2306.3(3), Table 2308.7.5, 2404.1, 2505.1, 2505.2, 2506.2.1, G104.2.3.2, G304.2, G402
8—17
Standard Specification for the Design of Cold-formed Stainless Steel Structural Members
1604.3.3, 2210.1, 2210.2
19—16
Structural Applications of Steel Cables for Buildings
2208.1
24—14*
* As modified in Appendix G
Flood Resistant Design and Construction
202 (design flood elevation), 3001.2, G101.3, G102.1, G103.1, G104.2.1, G104.2.3.1, G104.2.3.2, G107.2, G107.3, G301.1, G303.3, G303.4, G303.5, G303.8, G304.1, G304.1.1, G304.1.2, G304.2, G304.3, G304.4.1.1, G305.2, G307.1, G307.2, G307.3, G308.1, G308.3, G308.5, G308.6, G308.7, G309.1, G310.3, G310.6
29—14
Standard Calculation Methods for Structural Fire Protection
722.1
32—17
Design and Construction of Frost Protected Shallow Foundations
1809.3.1
49—12
Wind Tunnel Testing for Buildings and Other Structures
1609.1.6.3
55—10
Tensile Membrane Structures
3102.7.3
ASME
American Society of Mechanical Engineers Two Park Avenue New York, NY 10016-5990
Standard reference number
Title
Referenced in code section number
ASME/A17.1—13* CSA B44—2013
* As modified in Appendix K
Safety Code for Elevators and Escalators
907.3.3, 911.1.6, 1009.4, 1607.10.1, 2409.2, 2409.3, 2409.4, 2409.4.1 3001.2, 3001.4, 3002.1.2, 3002.4.3.1, 3002.4.3.2, 3002.4.3.3, 3002.5, 3002.8, 3003.2, 3003.3.1, 3007.1, 3008.1.3, 3008.8.1, 3009.3, K1
A17.2—2014
Guide for Inspection of Elevators, Escalators & Moving Walks
3001.2
A17.3—2015*
* As modified in Appendix K
Safety Code for Existing Elevators And Escalators
3001.2, K3
A17.5—2013
Elevator and Escalator Electrical Equipment
3001.2
A17.6—2010
Standard for Elevator Suspension, Compensation, and Governor Systems
3001.2
A17.7—2007/ CSA B44—07
Performance-Based Safety Code for Elevators and Escalators
3001.2
A18.1—2017
Safety Standard for Platform Lifts and Stairway Chairlifts
1109.7.1, 1109.7.1.1, 3001.2
A90.1—09
Safety Standard for Belt Manlifts
3001.2
B16.18—2012
Cast Copper Alloy Solder Joint Pressure Fittings
909.13.1
B16.22—2001(R2010)
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
909.13.1
B20.1—2015*
* As modified in Appendix K
Safety Standard for Conveyors and Related Equipment
3001.2, 3004.3
B31.3—2012
Process Piping
415.11.6
ASTM
ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428-2959
Standard reference number
Title
Referenced in code section number
A 6/A 6M—14
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes and Sheet Piling
1811.7.1, 1811.7.3, 1811.7.6
A 36/A 36M—14
Specification for Carbon Structural Steel
1811.7.1
A 153/A 153M—16a
Specification for Zinc Coating (Hot-dip) on Iron and Steel Hardware
2304.10.5
A 240/A 240M—13A
Standard Specification for Chromium and Chromium-nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Applications
Table 1507.4.3(1)
A 252—10
Specification for Welded and Seamless Steel Pipe Piles
1811.7.1, 1811.7.1.2, 1812.6.1
A 283/A 283M—13
Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
1811.7.1, 1812.6.1
A 416/A 416M—15
Specification for Steel Strand, Uncoated Seven-wire for Prestressed Concrete
1811.6.3.1, 1815.3
A 463/A 463M—10
Standard Specification for Steel Sheet, Aluminum-coated, by the Hot-dip Process
Table 1507.4.3(2)
A 572/A 572M—15
Specification for High-strength Low-alloy Columbium-Vanadium Structural Steel
1811.7.1
A 588/A 588M—15
Specification for High-strength Low-alloy Structural Steel with 50 ksi (345 MPa) Minimum Yield Point with Atmospheric Corrosion Resistance
1811.7.1
A 615/A 615M—15ae1
Specification for Deformed and Plain Billet-steel Bars for Concrete Reinforcement
1812.7.2.1, 1812.8.1
A 653—15
Specification for Steel Sheet, Zinc-coated or Zinc-iron Alloy-coated Galvannealed by the Hot-dip Process
2304.10.5.1
A 653/A 653M—11
Specification for Steel Sheet, Zinc-coated Galvanized or Zinc-iron Alloy-coated Galvannealed by the Hot-dip Process
Table 1507.4.3(1), Table 1507.4.3(2)
A 690/A 690M—13a
Standard Specification for High-strength Low-alloy Nickel, Copper, Phosphorus Steel H-piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
1811.7.1
A706/A706M—15
Specification for Low-alloy Steel Deformed and Plain Bars for Concrete Reinforcement
1705.3.1, 1903.5.2, 2107.3
A 722/A 722M—15
Specification for Uncoated High-strength Steel Bar for Prestressing Concrete
1812.7.2.1, 1812.8.1, 1815.3
A 755/A 755M—2011
Specification for Steel Sheet, Metallic-coated by the Hot-dip Process and Prepainted by the Coil-coating Process for Exterior Exposed Building Products
Table 1507.4.3(1), Table 1507.4.3(2)
A 792/A 792M—10
Specification for Steel Sheet, 55% Aluminum-zinc Alloy-coated by the (Hot-dip) Process
Table 1507.4.3(1), Table 1507.4.3(2)
A 875/A 875M—13
Standard Specification for Steel Sheet Zinc-5 percent, Aluminum Alloy-coated by the (Hot-dip) Process
Table 1507.4.3(2)
A 822—04a (2010)
Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
1815.3
A 924/A 924M—13
Standard Specification for General Requirements for Steel Sheet, Metallic-coated by the Hot-dip Process
Table 1507.4.3(1)
B 42—10
Specification for Seamless Copper Pipe, Standard Sizes
909.13.1
B 43—09
Specification for Seamless Red Brass Pipe, Standard Sizes
909.13.1
B 68—11
Specification for Seamless Copper Tube, Bright Annealed (Metric)
909.13.1
B 88—09
Specification for Seamless Copper Water Tube
909.13.1
B 101—12
Specification for Lead-coated Copper Sheet and Strip for Building Construction
1404.5.3, Table 1507.2.9.2, Table 1507.4.3(1)
B 209—10
Specification for Aluminum and Aluminum Alloy Steel and Plate
Table 1507.4.3(1)
B 251—10
Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube
909.13.1
B 280—08
Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
909.13.1
B 370—12
Specification for Copper Sheet and Strip for Building Construction
1404.5.2, Table 1507.2.9.2, Table 1507.4.3(1)
B 695—04 (2016)
Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
2304.10.5.1, 2304.10.5.3
C 5—10
Specification for Quicklime for Structural Purposes
Table 2507.2
C 22/C 22M-00 (2010)
Specification for Gypsum
Table 2506.2
C 27—98 (2013)
Specification for Classification of Fireclay and High-alumina Refractory Brick
2111.6, 2111.9
C 28/C 28M—10
Specification for Gypsum Plasters
Table 2507.2
C 31/C 31M—15
Practice for Making and Curing Concrete Test Specimens in the Field
Table 1705.8.1 1905.1.3, 1905.6.3.3, 1905.6.3.3.1, 1905.6.3.8, 1905.6.4.2, 3305.3.5.6
C 33/C 33M—13
Specification for Concrete Aggregates
722.3.1.4, 722.4.1.1.3
C 35/C 35M—1995 (2009)
Specification for Inorganic Aggregates for Use in Gypsum Plaster
Table 2507.2
C 39/C 39M—14a
Test Method for Compressive Strength of Cylindrical Concrete Specimens
1812.1.1.2.2, 1905.6.3.3.3, 1911.5.2, 1911.10.3
C 42/C 42M—13
Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
1905.6.5.2, 1911.5.1, 1911.10, 1911.10.1
C 55—2011
Specification for Concrete Building Brick
Table 722.3.2
C 59/C 59M—00 (2011)
Specification for Gypsum Casting Plaster and Molding Plaster
Table 2507.2
C 61/C 61M—00 (2011)
Specification for Gypsum Keene's Cement
Table 2507.2
C 67—13
Test Methods of Sampling and Testing Brick and Structural Clay Tile
721.4.1.1.1
C 73—10
Specification for Calcium Silicate Brick (Sand-lime Brick)
Table 722.3.2
C 90—13
Specification for Loadbearing Concrete Masonry Units
Table 722.3.2
C 91—12
Specification for Masonry Cement
Table 2507.2
C 94/C 94M—15
Specification for Ready-Mixed Concrete
110.3.1, 1905.1.3, 1905.6.3.8, 1905.8.2
C 138/C 138M—17a
Standard Test Method for Density (Unit Weight) Yield and Air Content (Gravimetric) of Concrete
1812.1.1.2.3, 1905.6.3.6
C 140—13
Test Method Sampling and Testing Concrete Masonry Units and Related Units
722.3.1.2
C 143—15a
Standard Test Method for Slump of Hydraulic-cement Concrete
1905.6.3.6
C 150—15
Specification for Portland Cement
Table 1904.4.2 Table 2507.2
C 172/C 172M—14a
Practice for Sampling Freshly Mixed Concrete
Table 1705.3 1905.6.3.2
C 173/C 173M—14
Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
1905.6.3.6
C 199—84 (2016)
Test Method for Pier Test for Refractory Mortars
2111.6, 2111.9, 2113.12
C 206—13
Specification for Finishing Hydrated Lime
Table 2507.2
C 208—12
Specification for Cellulosic Fiber Insulating Board
Table 1508.2, 2303.1.6
C 216—13
Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Table 721.1(2),
C 231/C 231M—14
Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
1905.6.3.6
C 260/C 260M—10a (2016)
Standard Specification for Air-entraining Admixtures for Concrete
1905.3.4
C 270—14a
Specification for Mortar for Unit Masonry
2103.2.4
C 315—07 (2016)
Specification for Clay Flue Liners and Chimney Pots
2111.9, 2113.11.1, Table 2113.16(1), Table 2113.16(2)
C 317/C 317M—00 (2010)
Specification for Gypsum Concrete
2514.1
C 330/C 330M—2014
Specification for Lightweight Aggregates for Structural Concrete
202 (concrete, lightweight aggregate; concrete, sand- lightweight), 1905.1.4
C 331/C 331M—2010
Specification for Lightweight Aggregates for Concrete Masonry Units
722.3.1.4, 722.4.1.1.3
C 406/C 406M—2010
Specification for Roofing Slate
1507.7.5
C 472—99 (2009)
Specification for Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
Table 2506.2
C 473—12
Test Method for Physical Testing of Gypsum Panel Products
Table 2506.2
C 474—13
Test Methods for Joint Treatment Materials for Gypsum Board Construction
Table 2506.2
C 475/C 475M—12
Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
Table 2506.2
C 476—18
Specification for Grout for Masonry
202 (grout)
C 494—13
Standard Specification for Chemical Admixtures for Concrete
1905.3.4
C 511—13
Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
1905.6.3.3.2
C 514—04 (2009)e1
Specification for Nails for the Application of Gypsum Board
Table 721.1(2), Table 721.1(3), Table 2506.2
C 516—08
Specifications for Vermiculite Loose Fill Thermal Insulation
722.3.1.4, 722.4.1.1.3
C 547—12
Specification for Mineral Fiber Pipe Insulation
Table 721.1(2), Table 721.1(3)
C 549—06 (2012)
Specification for Perlite Loose Fill Insulation
722.3.1.4, 722.4.1.1.3
C 552—12b
Standard Specification for Cellular Glass Thermal Insulation
Table 1508.2
C 557—03 (2009)
Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
Table 2506.2
C 578—12b
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Table 1508.2, 2603.10
C 587—04 (2009)
Specification for Gypsum Veneer Plaster
Table 2507.2
C 595/C 595M—14e1
Specification for Blended Hydraulic Cements
Table 1904.4.2, Table 2507.2
C 618—12a
Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
Table 1904.4.2
C 631—09
Specification for Bonding Compounds for Interior Gypsum Plastering
Table 2507.2
C 635—00*
* As modified in Appendix R
Specification for the Manufacture, Performance and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
808.1.1.1, R101.1, R102.1, R102.2, R102.3, Q102.1
C 636—96*
* As modified in Appendix R
Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels
808.1.1.1, R101.1, R103.1, R103.2, R103.3, R103.4, R103.5, R103.6, R103.7, R103.8, R103.9, R103.10, R103.11, R103.12, R103.13, R103.14
C 645—13
Specification for Nonstructural Steel Framing Members
Table 2506.2, Table 2507.2
C 685—11
Standard Specification for Concrete Made by Volumetric Batching
1905.8.2
C 726—12
Standard Specification for Mineral Roof Insulation Board
Table 1508.2
C 728—05 (2013)
Standard Specification for Perlite Thermal Insulation Board
Table 1508.2
C 744—11
Specification for Prefaced Concrete and Calcium Silicate Masonry Units
Table 722.3.2
C 754—11
Specification for Installation of Steel Framing Members to Receive Screw-attached Gypsum Panel Products
Table 2508.1, Table 2511.1.1
C 836/C 836M—12
Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
1507.15.2
C 840—11
Specification for Application and Finishing of Gypsum Board
Table 2508.1, 2509.2
C 841—03 (2008)E1
Specification for Installation of Interior Lathing and Furring
Table 2508.1, Table 2511.1.1
C 842—05 (2010)E1
Specification for Application of Interior Gypsum Plaster
Table 2511.1.1, 2511.3, 2511.4
C 843—99 (2012)
Specification for Application of Gypsum Veneer Plaster
Table 2511.1.1
C 844—04 (2010)
Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
Table 2508.1
C 845/C 845M—12
Standard Specification for Expansive Hydraulic Cement
Table 1904.4.2
C 847—12
Specification for Metal Lath
Table 2507.2
C 887—13
Specification for Packaged, Dry Combined Materials for Surface Bonding Mortar
2103.2.2
C 897—05 (2009)
Specification for Aggregate for Job-Mixed Portland Cement-based Plaster
Table 2507.2
C 920—11
Standard for Specification for Elastomeric Joint Sealants
Table 2506.2
C 926—13
Specification for Application of Portland Cement-based Plaster
2510.3, Table 2511.1.1, 2511.3, 2511.4, 2512.1, 2512.1.2, 2512.2, 2512.6, 2512.8.2, 2512.9, 2513.7
C 932—06 (2013)
Specification for Surface-applied Bonding Compounds for Exterior Plastering
Table 2507.2
C 933—13
Specification for Welded Wire Lath
Table 2507.2
C 946—10
Specification for Construction of Dry-stacked, Surface-bonded Walls
2103.2.2, 2109.2.2
C 954—11
Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 inch (0.84 mm) to 0.112 inch (2.84 mm) in Thickness
Table 2506.2, Table 2507.2
C 955—11C
Standard Specification for Load-bearing Transverse and Axial Steel Studs, Runners Tracks, and Bracing or Bridging, for Screw Application of Gypsum Panel Products and Metal Plaster Bases
Table 2506.2, Table 2507.2
C 956—04 (2010)
Specification for Installation of Cast-in-place Reinforced Gypsum Concrete
2514.1
C 957—10
Specification for High-solids Content, Cold Liquid-applied Elastomeric Waterproofing Membrane with Integral Wearing Surface
1507.15.2
C 989/C 989M—13
Standard Specification for Slag Cement for Use in Concrete and Mortars
Table 1904.4.2
C 1002—07
Specification for Steel Self-piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
Table 2506.2, Table 2507.2
C 1007—11a
Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
Table 2508.1, Table 2511.1.1
C 1029—13
Specification for Spray-applied Rigid Cellular Polyurethane Thermal Insulation
1507.14.2
C 1032—06(2011)
Specification for Woven Wire Plaster Base
Table 2507.2
C 1047—10A
Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
Table 2506.2, Table 2507.2
C 1063—12D
Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-based Plaster
2510.3, Table 2511.1.1, 2512.1.1
C 1064/C 1064M—17
Standard Test Method for Temperature of Freshly Mixed Hydraulic-cement Concrete
1905.6.3.6
C 1074—19
Standard Practice for Estimating Concrete Strength by the Maturity Method
3305.3.5.1.3
C 1088—13
Specification for Thin Veneer Brick Units Made from Clay or Shale
Table 721.1(2)
C 1157/C 1157M—11
Standard Performance Specification for Hydraulic Cement
Table 1904.4.2, Table 2507.2
C 1167—11
Specification for Clay Roof Tiles
1507.3.4
C 1177/C 1177M—08
Specification for Glass Mat Gypsum Substrate for Use as Sheathing
Figure 722.5.1(2), Figure 722.5.1(3), Table 1508.2, Table 2506.2
C 1178/C 1178M—11
Specification for Coated Mat Water-resistant Gypsum Backing Panel
Figure 722.5.1(2), Figure 722.5.1(3), Table 2506.2, Table 2509.2
C 1186—08 (2012)
Specification for Flat Fiber Cement Sheets
1404.10, 1405.16.1, 1405.16.2
C 1240—14
Standard Specification for Silica Fume Used in Cementitious Mixtures
Table 1904.4.2
C 1261—10
Specification for Firebox Brick for Residential Fireplaces
2111.6, 2111.9
C 1278M—07a (2011)
Specification for Fiber-reinforced Gypsum Panels
Figure 722.5.1(2), Figure 722.5.1(3), Table 1508.2, Table 2506.2
C 1280—13
Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
Table 2508.1, 2508.2
C 1283—11
Practice for Installing Clay Flue Lining
2113.9.1, 2113.12
C 1288—99 (2010)
Standard Specification for Discrete Nonasbestos Fiber-cement Interior Substrate Sheets
Table 2509.2
C 1289—13E1
Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Table 1508.2, 2603.10
C 1313/C 1313M—12
Standard Specification for Sheet Radiant Barriers for Building Construction Applications
1509.4
C 1325—08b
Standard Specification for Nonasbestos Fiber-mat Reinforced Cement Backer Units
Table 2509.2
C 1328/C1328M—12
Specification for Plastic (Stucco Cement)
Table 2507.2
C 1364—10B
Standard Specification for Architectural Cast Stone
2103.1
C 1371—04a (2010)e1
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
1504.9
C 1386—07
Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
202 (autoclaved aerated concrete (aac)), 2102.1,
C 1396M/C 1396M—13
Specification for Gypsum Board
Table 2506.2, Table 2508.1 Figure 722.5.1(2), Figure 722.5.1(3)
C 1492—03 (2009)
Standard Specification for Concrete Roof Tile
1507.3.5
C 1549—09
Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
1504.9
C 1600/C 1600M—11
Standard Specification for Rapid Hardening Hydraulic Cement
Table 2507.2
C 1629/C 1629M—06 (2011)
Standard Classification for Abuse-resistant Nondecorated Interior Gypsum Panel Products and Fiber-reinforced Cement Panels
403.2.3.1, 403.2.3.2, 403.2.3.4
C 1658/C 1658M—12
Standard Specification for Glass Mat Gypsum Panels
Figure 722.5.1(2), Figure 722.5.1(3), Table 2506.2
C 1670—16
Standard Specification for Adhered Manufactured Stone Masonry Veneer Units
2103.1
D 25—12 (2017)
Specification for Round Timber Piles
1811.5.1, 1811.5.4, 2303.1.12
D 41—05
Specification for Asphalt Primer Used in Roofing, Dampproofing and Waterproofing
Table 1507.10.2
D 43—00 (2006)
Specification for Coal Tar Primer Used in Roofing, Dampproofing and Waterproofing
Table 1507.10.2
D 56—05 (2010)
Test Method for Flash Point By Tag Closed Tester
202 (flashpoint)
D 86—2012
Test Method for Distillation of Petroleum Products at Atmospheric Pressure
202 (boiling point)
D 93—2012
Test Method for Flash Point By Pensky-Martens Closed Cup Tester
202 (flashpoint)
D 225—07
Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules
1507.2.5
D 226/D 226M—09
Specification for Asphalt-saturated Organic Felt Used in Roofing and Waterproofing
1404.2, 1505.2, 1507.2.3, 1507.3.3, 1507.5.3, 1507.6.3, 1507.7.3, Table 1507.8, 1507.8.3, 1507.9.3, 1507.9.5, Table 1507.10.2, 1507.17.3, 1507.17.4.1
D 227/D 227M—03 (2011)E1
Specification for Coal-tar-saturated Organic Felt Used in Roofing and Waterproofing
Table 1507.10.2
D 312—00 (2006)
Specification for Asphalt Used in Roofing
Table 1507.10.2
D 448—08
Standard Classification for Sizes of Aggregate for Road and Bridge Construction
1507.12.3, 1507.13.3
D 450—07
Specification for Coal-tar Pitch Used in Roofing, Dampproofing and Waterproofing
Table 1507.10.2
D 635—10
Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
2606.4, H107.1.1, H117.4
D 692/D 692M—15
Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
1913.2
D 1073—16
Standard Specification for Fine Aggregate for Asphalt Paving Mixtures
1913.2
D 1143/D 1143M—07 (2013)e1
Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
1810.4.1.3, 1810.4.1.5.1, 1814.4.1
D 1227—95 (2007)
Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
Table 1507.10.2, 1507.15.2
D 1557—12e1
Test Method for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lb/ ft3 (2,700 KN m/m3))
1806.2.2
D 1586—18
Specification for Penetration Test and Split-barrel Sampling of Soils
1613.3.4.1, 1803.5
D 1587—15
Standard Practice for Thin-walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes
1803.5
D 1761—12
Test Method for Mechanical Fasteners in Wood
1712.1.1, 1712.1.2, 1712.1.3
D 1863/D 1863M—05 (2011)E1
Specification for Mineral Aggregate Used on Built-up Roofs
Table 1507.10.2
D 1929—12
Test Method for Determining Ignition Temperature of Plastics
402.6.4.4, 1407.11.2.1, 2606.4
D 1970/D 1970M—2013
Specification for Self-adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roof Underlayment for Ice Dam Protection
1507.2.3 1507.2.4, 1507.2.9.2, 1507.3.9, 1507.5.7, 1507.8.8, 1507.9.9, 1507.17.4.1
D 2113—14
Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
1803.5
D 2166—16
Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
1613.3.4.1
D 2178—04
Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
Table 1507.10.2
D 2216—19
Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
1613.3.4.1
D 2487—2017
Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
Table 1610.1, 1803.3
D 2626/D 2626M—04 (2012)E1
Specification for Asphalt Saturated and Coated Organic Felt Base Sheet Used in Roofing
1507.3.3, Table 1507.10.2
D 2822/D 2822M—05 (2011)E1
Specification for Asphalt Roof Cement, Asbestos Containing
Table 1507.10.2
D 2823/D 2823M—05 (2011)E1
Specification for Asphalt Roof Coatings, Asbestos Containing
Table 1507.10.2
D 2824—06 (2012)E1
Standard Specification for Aluminum-Pigmented Asphalt Roof Coating, Nonfibered, Asbestos Fibered and Fibered without Asbestos
Table 1507.10.2
D 2843—10
Test for Density of Smoke from the Burning or Decomposition of Plastics
2606.4
D 2850—15
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
1613.3.4.1
D 2898—10 (2017)
Test Methods for Accelerated Weathering of Fire-retardant-treated Wood for Fire Testing
1505.1, 2303.2.4, 2303.2.6
D 3019—08
Specification for Lap Cement Used with Asphalt Roll Roofing, Nonfibered, Asbestos Fibered and Nonasbestos Fibered
Table 1507.10.2
D 3161/D 3161M—13
Test Method for a Wind Resistance of Asphalt Shingles (Fan Induced Method)
1504.1.1, Table 1504.1.1, 1507.17.8
D 3200—74 (2017)
Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
2303.1.12
D 3201—2013
Test Method for Hygroscopic Properties of Fire-retardant Wood and Wood-based Products
2303.2.7
D 3273—12
Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
2506.3
D 3278—1996 (2011)
Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus
202 (flashpoint)
D 3441—2016
Standard Test Method for Mechanical Cone Penetration Testing of Soils
1803.5.2
D 3462/D 3462M—10A
Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
1507.2.5
D 3468—99 (2006)e01
Specification for Liquid-applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
1507.15.2
D 3679—11
Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding
1404.9, 1405.14
D 3689—07(2013)E1
Test Methods for Deep Foundations Under Static Axial Tensile Load
1810.4.2.1, 1814.4.2
D 3737—2018
Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
2303.1.3
D 3746—85 (2008)
Test Method for Impact Resistance of Bituminous Roofing Systems
1504.7
D 3747—79 (2007)
Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation
Table 1507.10.2
D 3909/D 3909M—97b (2012)e1
Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules
1507.2.9.2, 1507.6.5, Table 1507.10.2
D 3957—09 (2015)
Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
2303.1.11
D 3966—07 (2013)E1
Standard Test Methods for Deep Foundations Under Lateral Loads
1810.4.3, 1810.4.3.3
D 4022/D 4022M—2007 (2012)E1
Specification for Coal Tar Roof Cement, Asbestos Containing
Table 1507.10.2
D 4272—09
Test Method for Total Energy Impact of Plastic Films by Dart Drop
1504.7
D 4318—2013E1
Test Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils
1613.3.4.1
D 4434/D 4434M—12
Specification for Poly (Vinyl Chloride) Sheet Roofing
1507.13.2
D 4479/D 4479M—07 (2012)E1
Specification for Asphalt Roof Coatings-Asbestos-free
Table 1507.10.2
D 4586/D 4586M—07 (2012)E1
Specification for Asphalt Roof Cement-Asbestos-free
Table 1507.10.2
D 4601/D 4601M—04 (2012)E1
Specification for Asphalt-coated Glass Fiber Base Sheet Used in Roofing
Table 1507.10.2
D 4637/D 4637M—13
Specification for EPDM Sheet Used in Single-ply Roof Membrane
1507.12.2
D 4869/D 4869M—05 (2011)e01
Specification for Asphalt-saturated (Organic Felt) Underlayment Used in Steep Slope Roofing
1507.2.3, 1507.5.3, 1507.6.3, 1507.7.3, 1507.8.3, 1507.9.3, 1507.17.3, 1507.17.4.1
D 4897/D 4897M—01 (2009)
Specification for Asphalt-coated Glass Fiber Venting Base Sheet Used in Roofing
Table 1507.10.2
D 4990—97a (2005)e01
Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
Table 1507.10.2
D 4945—17
Test Method for High-strain Dynamic Testing of Piles
1810.4.1.4
D 5019—07a
Specification for Reinforced Nonvulcanized Polymeric Sheet Used in Roofing Membrane
1507.12.2
D 5034—09 (2017)
Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
3308.6.3
D 5035—11 (2019)
Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
3308.6.3
D 5055—16
Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-joists
2303.1.2
D 5096—2002 (2017)
Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
3314.4.4.6, 3316.7.8.5, 3319.13.2
D 5456—17E1
Specification for Evaluation of Structural Composite Lumber Products
Table 1705.5.6, 2303.1.10
D 5516—17
Test Method of Evaluating the Flexural Properties of Fire-retardant-treated Softwood Plywood Exposed to the Elevated Temperatures
2303.2.5.1
D 5643/D 5643M—06 (2012)E1
Specification for Coal Tar Roof Cement, Asbestos-free
Table 1507.10.2
D 5664—17
Standard Test Method for Evaluating the Effects of Fire-retardant Treatment and Elevated Temperatures on Strength Properties of Fire-retardant Treated Lumber
2303.2.5.2
D 5665—99a (2006)
Specification for Thermoplastic Fabrics Used in Cold-applied Roofing and Waterproofing
Table 1507.10.2
D 5726—98 (2005)
Specification for Thermoplastic Fabrics Used in Hot-applied Roofing and Waterproofing
Table 1507.10.2
D 5778—12
Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
1803.5.2
D 6066—11
Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
1816.2
D 6083—05e01
Specification for Liquid Applied Acrylic Coating Used in Roofing
Table 1507.10.2, Table 1507.14.3, 1507.15.2
D 6162—2000A (2008)
Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
1507.11.2
D 6163—00 (2008)
Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
1507.11.2
D 6164/D 6164M—11
Specification for Styrene-butadiene-styrene (SBS) Modified Bituminous Sheet Metal Materials Using Polyester Reinforcements
1507.11.2
D 6222/D 6222M—11
Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
1507.11.2
D 6223/D 6223M—02 (2011)E1
Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
1507.11.2
D 6298—05e1
Specification for Fiberglass Reinforced Styrene-butadiene-styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
1507.11.2
D 6305—08 (2015)E1
Practice for Calculating Bending Strength Design Adjustment Factors for Fire-retardant-treated Plywood Roof Sheathing
2303.2.5.1
D 6380—03 (2009)
Standard Specification for Asphalt Roll Roofing (Organic) Felt
1507.2.9.2, 1507.3.3, 1507.6.5
D 6509/D 6509M—09
Standard Specification for Atactic Polypropylene (APP) Modified Bituminous base Sheet Materials Using Glass Fiber Reinforcements
1507.11.2
D 6694—08
Standard Specification for Liquid-applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
Table 1507.14.3, 1507.15.2
D 6754/D 6745M—10
Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
1507.13.2
D 6757—2013
Standard Specification for Underlayment for Use with Steep Slope Roofing
1507.2.3, 1507.17.3, 1507.17.4.1
D 6841—16
Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-retardant-treated Lumber
2303.2.5.2
D 6878/D 6878M—11a
Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
1507.13.2
D 6947—07
Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
Table 1507.14.3, 1507.15.2
D 7032—10a
Standard Specification for Establishing Performance Ratings for Wood, Plastic Composite Deck Boards and Guardrail Systems (Guards or Rails)
2612.2.1, 2612.2.2, 2612.4, 2612.5.1
D 7147—11
Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
2303.5, 2304.10.3
D 7158/D 7158M—11
Standard Test Method for Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method)
1504.1.1, Table 1504.1.1
D 7254—07
Standard Specification for polypropylene (PP) siding
1404.12
D 7655—12
Standard Classification for Size of Aggregate Used as Ballast for Roof Membrane Systems
1507.12.3, 1507.13.3
D 7672—2014
Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
2303.1.3
E 84—2013A
Test Methods for Surface Burning Characteristics of Building Materials
202 (flame spread index; smoke- developed index), 402.6.4.4, 402.6.2, 703.5.2, 720.1, 720.1.1, 720.1.2, 720.4, 803.1.1, 803.1.4, 803.1.4.1, 803.10, 803.11, 806.7, 1404.12.1, 1510.10.3, 2303.2, 2603.3, 2603.4.1.13, 2606.3.5.4, 2603.5.5, 2603.7, 2603.7.1, 2603.7.3, 2604.2.4, 2606.4, 2612.3, 2614.3, 3105.3, K1
E 90—09
Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
1207.2, 1207.2.1
E 108—2011
Test Methods for Fire Tests of Roof Coverings
1505.1, 2603.6, 2610.2, 2610.3
E 119—2012A
Standard Test Methods for Fire Tests of Building Construction and Materials
703.2, 703.2.1, 703.2.3, 703.2.5, 703.3, 703.4, 703.6, 704.12, 705.7, 705.8.5, 707.6, 712.1.13.2, 714.3.1, 714.4.1, 715.1, 715.4, 716.2, Table 716.3, Table 716.5, 716.5.6, 716.5.8.1.1, Table 716.6, 716.6.7.1, 717.3.1, 717.5.2, 717.5.3, 717.6.1, 716.6.2.1, Table 721.1(1), 1407.10, 1409.10, 2103.1, 2603.4, 2603.5.1, 2603.5.2
E 136—2012
Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
703.5.1, 720.1.1
E 330—02
Test Method for Structural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference
1705.9.2
E 331—00 (2009)
Test Method for Water Penetration of Exterior Windows, Skylights, Doors and Curtain Walls by Uniform Static Air Pressure Difference
1403.2
E 336—05
Standard Test Method for Measurement of Airborne Sound Insulation in Buildings
1207.2
E 408—13
Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-meter Techniques
1504.9
E 492—09
Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-ceiling Assemblies Using the Tapping Machine
1207.3
E 605—93 (2011)
Test Method for Thickness and Density of Sprayed Fire-resistive Material (SFRM) Applied to Structural Members
1705.14.4.1, 1705.14.4.2, 1705.14.4.5, 1705.14.5
E 648—06a
Standard Test Method for Critical Radiant Flux of Floor-covering Systems Using a Radiant Heat Energy Source
804.2
E 681—2009
Test Methods for Concentration Limits of Flammability of Chemical Vapors and Gases
202 (flammable gas)
E 736—00 (2011)
Test Method for Cohesion/Adhesion of Sprayed Fire-resistive Materials Applied to Structural Members
704.13.2, 1705.14.6
E 814—2013
Test Method of Fire Tests of Through-penetration Firestops
202 (f rating; t rating), 714.3.1.2, 714.3.2, 714.4.1.2
E 970—2010
Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
720.3.1
E 1007—97
Test Method for Field Measurement of Tapping Machine Impact Sound Transmission through Floor-ceiling Assemblies and Associated Support Structures
1207.3
E 1300—12AE1
Practice for Determining Load Resistance of Glass in Buildings
2404.1
E 1354—2013
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
424.2
E 1592—05 (2012)
Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
1504.3.2
E 1602—02 (2010)E1
Guide for Construction of Solid Fuel-burning Masonry Heaters
2112.2
E 1886—13A
Test Method for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Missiles and Exposed to Cyclic Pressure Differentials
1609.1.2
E 1918—16
Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-sloped Surfaces in the Field
1504.9
E 1966—07A (2011)
Test Method for Fire-resistant Joint Systems
202 (fire-resistant joint system), 715.3
E 1980—11
Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-sloped Opaque Surfaces
1504.9
E 1996—2014a*
* As modified in Chapter 16
Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
1609.1.2, 1609.1.2.2
E 2072—10
Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
1025.4, Figure S101.1(2), Figure S101.1(3), Figure S101.1(4), Figure S101.1(5), Figure S101.1(6), Figure S101.1(7), Figure S101.1(8)
E 2174—10AE1
Standard Practice for On-Site Inspection of Installed Fire Stops
1705.17.1
E 2273—03 (2011)
Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
1408.4.1
E 2307—2010
Standard Test Method for Determining Fire Resistance of a Perimeter Joint System Between an Exterior Wall Assembly and Floor Assembly Using the Intermediate-scale, Multistory Test Apparatus
715.4
E 2353—2014
Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards and Balustrades
2407.1.2
E 2393—10A
Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barrier
1705.17.2
E 2404—2013E1
Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
803.1.4
E 2556—10
Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
2510.6
E 2568—09e1
Standard Specification for PB Exterior Insulation and Finish Systems
1408.2
E 2570—07
Standard Test Method for Evaluating Water-resistive Barrier (WRB) Coatings Used Under Exterior Insulation and Finish Systems (EIFS) for EIFS with Drainage
1408.4.1.1, 1705.16
E 2573—12
Standard Practice for Specimen Preparation and Mounting of Site-fabricated Stretch Systems to Assess Surface Burning Characteristics
803.10
E 2599—11
Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
2614.3
E 2634—11 (2015)
Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
1903.4
E 2751—13
Standard Practice for Design and Performance of Supported Glass Walkways
2409.1
F 547—2012
Terminology of Nails for Use with Wood and Wood-based Materials
Table 2506.2
F 1346—91 (2003)
Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
3109.3.2.1, 3109.4, 3109.5.1.8, 3109.6
F 1667—2015
Specification for Driven Fasteners: Nails, Spikes and Staples
Table 721.1(2), Table 721.1(3), 1507.2.6, 1507.17.5, 2303.6, Table 2304.10.1, 2304.10.5, Table 2506.2
F 2090—10
Specification for Window Fall Prevention Devices with Emergency Escape (Egress) Release Mechanisms
1015.8
F 2200—2013
Standard Specification for Automated Vehicular Gate Construction
3110.3
F 2208—08
Standard Safety Specification for Residential Pool Alarms
3109.3.2.1
G 152—06
Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
1504.6
G 154—06
Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
1504.6
G 155—05a
Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials
1504.6
AWC
American Wood Council 222 Catoctin SE, Suite 201 Leesburg, VA 20175
Standard reference number
Title
Referenced in code section number
AWC WCD No. 4—2003
Wood Construction Data—Plank and Beam Framing for Residential Buildings
2306.1.2
AWC WFCM—2018
Wood Frame Construction Manual for One- and Two-Family Dwellings
1609.1.1, 1609.1.1.1, 2301.2, 2308.2.4, 2308.6.7.2, 2309.1
ANSI/AWC NDS—2018
National Design Specification (NDS) for Wood Construction with 2018 NDS Supplement
202 (nominal size (lumber)), 722.1, Table 1604.3, Table 1705.5.6, 1711.1.1, 1711.1.4, 1811.5, 1908.1.5, 2304.13, 2306.1, 2306.1.3, Table 2306.2(1), Table 2306.2(2), Table 2306.3(1), Table 2306.3(2), 2307.1
AWC STJR—2015
Span Tables for Joists and Rafters
2306.1.1, 2308.4.2.1, 2308.7.1, 2308.7.2
ANSI/AWC PWF—2015
Permanent Wood Foundation Design Specification
2304.10.5.2
AWC SDPWS—2015
Special Design Provisions for Wind and Seismic
202 (shear wall, shear wall segment, perforated), 2305.1, 2305.2, 2305.3, 2306.1, 2306.2, 2306.3, Table 2306.3(1), Table 2306.3(3)
AWC TR7—2007
Basic Requirements for Permanent Wood Foundation System, Technical Report No. 7
1805.2
AWCI
Association of the Wall and Ceiling Industry 513 West Broad Street, Suite 210 Falls Church, VA 22046
Standard reference number
Title
Referenced in code section number
12-B—04
Technical Manual 12-B Standard Practice for the Testing and Inspection of Field Applied Thin Film Intumescent Fire-resistive Materials; an Annotated Guide, Second Edition
1705.15
AWPA
American Wood Protection Association P.O. Box 361784 Birmingham, AL 35236-1784
Standard reference number
Title
Referenced in code section number
C1—03
All Timber Products-Preservative Treatment by Pressure Processes
1505.6
M4—16
Standard for the Care of Preservative-treated Wood Products
1811.5.2, 2303.1.9
U1—16
USE CATEGORY SYSTEM: User Specification for Treated Wood
Table 1507.9.6, 1811.5.2, 2303.1.9, 2304.12.1, 2304.12.2, 2304.12.3, 2304.12.4, 2304.12.5
AWS
American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166
Standard reference number
Title
Referenced in code section number
D1.1—15
Structural Welding Code—Steel
Table 1705.2, 1705.2.1.1, 1811.7.1.1, K1
D1.2—03
Structural Welding Code—Aluminum
1705.33.1, 2003.2.2
D1.3—98
Structural Welding Code—Sheet Steel
Table 1705.2
D1.4/D1.4M—2017
Structural Welding Code-Reinforcing Steel Including Metal Inserts and Connections In Reinforced Concrete Construction
Table 1705.2, 1705.2.1.3, Table 1705.3, 1903.6.2, 2107.3
AWWA
American Water Works Association 6666 West Quincy Avenue Denver, CO 80235
Standard reference number
Title
Referenced in code section number
C 104—08
American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
Q105.1
BHMA
Builders Hardware Manufacturers' Association 355 Lexington Avenue, 17th Floor New York, NY 10017-6603
Standard reference number
Title
Referenced in code section number
A 156.10—2011
Power Operated Pedestrian Doors
1010.1.4.2
A 156.19—2013
Standard for Power Assist and Low Energy Operated Doors
1010.1.4.2
A 156.27—11
Power and Manual Operated Revolving Pedestrian Doors
1010.1.4.1
CEN
European Committee for Standardization (CEN) Central Secretariat Rue de Stassart 36 B-10 50 Brussels
Standard reference number
Title
Referenced in code section number
EN 1081—98
Resilient Floor Coverings—Determination of the Electrical Resistance
406.7.1
BS EN 15250—2007
Slow Heat Release Appliances Fired By Solid Fuel Requirements and Test Methods
2112.2, 2112.5
CGSB
Canadian General Standards Board Place du Portage 111, 6B1 11 Laurier Street Gatineau, Quebec, Canada KIA 1G6
Standard reference number
Title
Referenced in code section number
37-GP-52M (1984)
Roofing and Waterproofing Membrane, Sheet Applied, Elastomeric
1504.7, 1507.12.2
37-GP-56M (1980)
Membrane, Modified, Bituminous, Prefabricated and Reinforced for Roofing—with December 1985 Amendment
1507.11.2
CAN/CGSB 37.54—95
Polyvinyl Chloride Roofing and Waterproofing Membrane
1507.13.2
CPA
Composite Panel Association 19465 Deerfield Avenue, Suite 306 Leesburg, VA 20176
Standard reference number
Title
Referenced in code section number
ANSI A135.4—2012
Basic Hardboard
2303.1.7
ANSI A135.5—2012
Prefinished Hardboard Paneling
1404.3.1, 2303.1.7, 2304.7
ANSI A135.6—2012
Engineered Wood Siding
1405.3.2, 2303.1.7
A208.1—09
Particleboard
2303.1 8, 2303.1.8.1
CPSC
Consumer Product Safety Commission 4330 East West Highway Bethesda, MD 20814-4408
Standard reference number
Title
Referenced in code section number
16 CFR Part 1201 (2002)
Safety Standard for Architectural Glazing Material
2406.2, Table 2406.2(1), 2406.3.1, 2407.1, 2407.1.4.1, 2408.2.1, 2408.3, 2409.2, 2409.3, 2409.4.1
16 CFR Part 1209 (2002)
Interim Safety Standard for Cellulose Insulation
720.6
16 CFR Part 1404 (2002)
Cellulose Insulation
720.6
16 CFR Part 1500.44 (2009)
Method for Determining Extremely Flammable and Flammable Solids
202 (flammable solid)
16 CFR Part 1630 (2007)
Standard for the Surface Flammability of Carpets and Rugs
804.4.1
CSA
Canadian Standards Association 8501 East Pleasant Valley Cleveland, OH 44131-5516
Standard reference number
Title
Referenced in code section number
AAMA/WDMA/CSA 101/I.S.2/A440—11
Specifications for Windows, Doors and Unit Skylights
1709.5.1, 2405.5
CSSB
Cedar Shake and Shingle Bureau P. O. Box 1178 Sumas, WA 98295-1178
Standard reference number
Title
Referenced in code section number
CSSB—97
Grading and Packing Rules for Western Red Cedar Shakes and Western Red Shingles of the Cedar Shake and Shingle Bureau
Table 1507.8.5, Table 1507.9.6
DASMA
Door and Access Systems Manufacturers Association International 1300 Summer Avenue Cleveland, OH 44115-2851
Standard reference number
Title
Referenced in code section number
ANSI/DASMA 107—1997 (R2012)
Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation
2603.4.1.9
108—12
Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference
1709.5.2
115—16
Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure
1609.1.2.3
DOC
U.S. Department of Commerce National Institute of Standards and Technology 1401 Constitution Avenue NW Washington, DC 20230
Standard reference number
Title
Referenced in code section number
PS-1—09
Structural Plywood
2303.1.5, 2304.7, Table 2304.8(4), Table 2304.8(5), Table 2306.2(1), Table 2306.2(2)
PS-2—10
Performance Standard for Wood-based Structural-use Panels
2303.1.5, 2304.7, Table 2304.7(5), Table 2304.8(5), Table 2306.2(1), Table 2306.2(2)
PS 20—05
American Softwood Lumber Standard
202 (grade (lumber)), 2303.1.1
DOJ
U.S. Department of Justice 950 Pennsylvania Avenue, NW Civil Rights Division, Disability Rights Section-NYA Washington, DC 20530
Standard reference number
Title
Referenced in code section number
36 CFR Part 1192
American with Disabilities Act (ADA) Accessibility Guidelines for Transportation Vehicles (ADAAG) Department of Justice, 1991
E109.2.4, E111.4
DOL
U.S. Department of Labor Frances Perkins Building 200 Constitution Avenue NW Washington, DC 20210
Standard reference number
Title
Referenced in code section number
29 CFR Part 1910.1000 (2009)
Air Contaminants
202 (ceiling limit)
DOT
NYS Department of Transportation Main Office 50 Wolf Road Albany, NY 12232
Standard reference number
Title
Referenced in code section number
EI 19—001
NYSDOT LRFD Bridge Design Specifications - 2019
1607.7.1
BM—2019
NYSDOT Bridge Manual
1607.7.1
DOTn
U.S. Department of Transportation c/o Superintendent of Documents East Building, 2nd floor Washington, DC 20590
Standard reference number
Title
Referenced in code section number
49 CFR Parts 100—185 (2005)
Hazardous Materials Regulations
202
49 CFR Parts 173.137 (2009)
Shippers—General Requirements for Shipments and Packaging—Class 8—Assignment of Packing Group
202 (corrosive material)
49 CFR Parts 173—178 (1999)
Specification of Transportation of Explosive and Other Dangerous Articles, UN 0335, UN 0336 Shipping Containers
202 (combustible liquid; explosive; fireworks; flammable liquid)
FEMA
Federal Emergency Management Agency Federal Center Plaza 500 C Street S.W. Washington, DC 20472
Standard reference number
Title
Referenced in code section number
FIS 360497
Federal Emergency Management Agency Flood Insurance Study report
202 (500-year flood elevation), G102.2, G402
FIRMs 360497
Federal Emergency Management Agency Flood Insurance Rate Map
202 (500-year flood elevation; base flood elevation; coastal a-zone; coastal high hazard area), G102.2, G102.3, G102.3.1, G102.3.2, G103.3.1, G103.3.2, G402
FORM 086-0-34—12
Floodproofing Certificate; Federal Emergency Management Agency
G107.3, G402
FORM 086-0-33—12
Elevation Certificate; Federal Emergency Management Agency
G107.3, G402
FM
Factory Mutual Global Research Standards Laboratories Department 1301 Atwood Avenue, P.O. Box 7500 Johnston, RI 02919
Standard reference number
Title
Referenced in code section number
4430 (2012)
Approval Standard for Heat and Smoke Vents
910.3.1
4470 (2012)
Approval Standard for Single-Ply Polymer-Modified Bitumen Sheet, Built-Up Roof (BUR) And Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
1504.7
4474 (2011)
American National Standard for Evaluating the Simulated Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures
1504.3.1, 1504.3.2
4880 (2010)
Approval Standard for Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels, Interior Finish Materials or Coatings and Exterior Wall Systems
2603.4, 2603.9
DS 1-35 (2017)
Factory Mutual Data Sheet – Green Roof Systems
1507.16.1
GA
Gypsum Association 6525 Belcrest Road, Suite 480 Hyattsville, MD 20782
Standard reference number
Title
Referenced in code section number
GA 216—13
Application and Finishing of Gypsum Panel Products
Table 2508.1, 2509.2
GA 600—12
Fire-Resistance Design Manual, 20th Edition
Table 721.1(1), Table 721.1(2), Table 721.1(3)
HPVA
Hardwood Plywood Veneer Association 1825 Michael Faraday Drive Reston, VA 20190
Standard reference number
Title
Referenced in code section number
HP-1—2016
American National Standard for Hardwood and Decorative Plywood
2303.3, 2304.7
HUD
U.S. Department of Housing and Urban Development 451 7th Street, SW Washington, DC 20410
Standard reference number
Title
Referenced in code section number
HUD 24 CFR Part 3280 (2008)
Manufactured Home Construction and Safety Standards
G201.1.2, G402
ICC
International Code Council, Inc. 500 New Jersey Ave, NW 6th Floor Washington, DC 20001
Standard reference number
Title
Referenced in code section number
ICC A117.1—09
Accessible and Usable Buildings and Facilities
202 (accessible unit, type b unit, type b+nyc unit), 907.2.11.1.1, 1009.8.2, 1009.9, 1009.11, 1010.1.9.7, 1012.1, 1012.6.5, 1012.10, 1013.4, 1023.9.3, 1101.2, 1103.2.2, 1105.1.7, 1106.1, 1106.5, 1106.6, 1106.7, 1106.7.3.1, 1106.7.3.2.1, 1106.8.2, 1106.8.5, 1107.2, 1107.2.1, 1107.2.2, 1107.2.2.1, 1107.2.2.2, 1107.2.2.3, 1107.2.2.5, 1107.2.2.7.3, 1107.2.2.7.5, 1107.2.2.7.6, 1107.2.2.8.1, 1107.2.2.8.1.1, 1107.2.2.8.2, 1107.2.2.8.2.1, 1107.2.2.9, 1107.2.3, 1107.2.3.1, 1107.2.3.2, 1107.2.3.3, 1107.2.3.4, 1107.2.3.5, 1107.2.4, 1107.2.5, 1107.2.6, 1107.2.7, 1107.2.8, 1107.3.1, 1107.4, 1107.6.1.3, 1108.2.2, 1108.2.3, 1108.2.5, 1108.2.7, 1108.2.9.2, 1108.3, 1108.4.1, 1108.4.1.1, 1108.4.1.2, 1108.4.1.4, 1108.4.1.5, 1109.1, 1109.2, 1109.2.2, 1109.2.4, 1109.3, 1109.4, 1109.5.1, 1109.5.2, 1109.5.3, 1109.6, 1109.7, 1109.7.1, 1109.7.1.1, 1109.8, 1109.8.1, 1109.9.3, 1109.9.3.3, 1109.9.3.4, 1109.10.3, 1109.16, 1109.17, 1110.4.10, 1110.4.11, 1110.4.12, 1111.2, 1111.3, 1111.4, 1111.4.2, 3001.2, 3001.3, 3307.2.6, E101.2, E104.2, E104.2.4, E104.3, E104.3.1, E105.1, E105.2.1, E105.2.2, E105.4, E105.5, E105.6, E106.2, E106.3, E106.4, E106.4.9, E106.5, E107.2, E107.3, E109.2.1, E109.2.2.1, E109.2.2.2, E109.2.2.3, E109.2.3, E109.2.5, E109.2.6, E109.2.8, E111.4
ICC 300—12
ICC Standard on Bleachers, Folding and Telescopic Seating and Grandstands
1029.1.1
ICC 400—17
Standard on Design and Construction of Log Structures
2301.2
ICC 500—14
ICC/NSSA Standard on the Design and Construction of Storm Shelters
202 (storm shelter), 423.1, 423.3, 423.4, 1604.5.1, 1604.10
ICC 600—14
Standard for Residential Construction in High-wind Regions
1609.1.1, 1609.1.1.1, 2308.2.4
SBCCI SSTD 11—99
Test Standard for Determining Wind Resistance of Concrete or Clay Roof Tiles
1711.2.1, 1712.2.2, 1504.2.1.1, 1504.2.1.2
IEC
International Electrotechnical Commission IEC Central Office 3, rue de Varembe, P.O. Box 131 1211 Geneva 20 Switzerland
Standard reference number
Title
Referenced in code section number
IEC 60118-4 – 2014-12
Electroacoustics - Hearing aids, Part 4
N102.1
IEC 62489-1 – 2010-01
Electroacoustics - Audio-frequency induction loop systems for assisted hearing, Part 1
N102.1
ISO
International Organization for Standardization ISO Central Secretariat 1 ch, de la Voie-Creuse, Case Postale 56 CH-1211 Geneva 20, Switzerland
Standard reference number
Title
Referenced in code section number
ISO 8115—86
Cotton Bales—Dimensions and Density
Table 307.1(1), Table 415.11.1.1.1
ISO 8336—09
Fiber-Cement Flat Sheets - Product Specification and Test Methods
1404.10, 1405.16.1, 1405.16.2, Table 2509.2
ITU
International Telecommunication Union (ITU): Place des Nations 1211 Geneva 20 Switzerland
Standard reference number
Title
Referenced in code section number
ITU-T, Recommendation E.161—2001
Arrangement of digits, letters and symbols on telephones and other devices that can be used for gaining access to a telephone network
1109.7.2.2.4.1
NAAMM
National Association of Architectural Metal Manufacturers 800 Roosevelt Road, Bldg. C, Suite 312 Glen Ellyn, IL 60137
Standard reference number
Title
Referenced in code section number
FP 1001—17
Guide Specifications for Design of Metal Flag Poles
1609.1.1
NCMA
National Concrete Masonry Association 13750 Sunrise Valley Herndon, VA 22071-4662
Standard reference number
Title
Referenced in code section number
TEK 5—84(1996)
Details for Concrete Masonry Fire Walls
Table 721.1(2)
NFPA
National Fire Protection Association 1 Batterymarch Park Quincy, MA 02169-7471
Standard reference number
Title
Referenced in code section number
2—16
Hydrogen Technologies Code
421.4
13—16*
* As modified in Appendix Q
Installation of Sprinkler Systems
705.8.2, 712.1.3.1, 901.1.1, 903.3.1.1, 903.3.2, 903.3.5.1, 903.3.8.2, 903.3.8.5, 905.3.3.1, 907.6.3, 1019.3, 1705.29.1, K1, Q101.1, Q102.1, Q105.1
13D—16*
* As modified in Appendix Q
Standard for the Installation of Sprinkler Systems in One- and Two-family Dwellings and Manufactured Homes
901.1.1, 903.2.11.4, 903.3.1.3 903.3.5.1.1, Q101.1, Q102.1, Q103.1
13R—16*
* As modified in Appendix Q
Standard for the Installation of Sprinkler Systems in Low Rise Residential Occupancies
901.1.1, 903.2.11.4, 903.3.1.2, 903.3.5.1, 903.3.5.1.1, 903.4 Q101.1, Q104.1, Q105.1
14—16*
* As modified in Appendix Q
Standard for the Installation of Standpipe and Hose System
403.3.2, 901.1.1, 905.2, 905.3.3.3, 905.4.2, 905.6.2, 905.8, 1705.30, 3202.2.4, 3303.8.1, G304.1.2, G308.9, G308.10, G308.11, G402, Q101.1, Q102.1, Q105.1
20—16*
* As modified in Appendix Q
Standard for the Installation of Stationary Pumps for Fire Protection
901.1.1, 913.1, 913.2, 913.2.1, 913.5, 1705.30.2, Q101.1, Q105.1, Q106.1
22—13
Standard for Water Tanks for Private Fire Protection
Q105.1
25—14
Standard for the Inspection, Testing, and Maintenance of Water-based Fire Protection Systems
Q102.1
30—12
Flammable and Combustible Liquids Code
415.6, 507.8.1.1.1, 507.8.1.1.2
31—11
Standard for the Installation of Oil-burning Equipment
2113.15
32—11
Standard for Dry Cleaning Plants
415.9.3
40—11
Standard for the Storage and Handling of Cellulose Nitrate Film
409.1
45—15
Standard on Fire Protection for Laboratories Using Chemicals
427.2, 427.7.1
54—16
National Fuel Gas Code
2113.1
58—14
Liquefied Petroleum Gas Code
415.9.2
61—13
Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Product Facilities
426.1
69—14
Standard on Explosion Prevention Systems
426.1
72—16*
* As modified in Appendix Q
National Fire Alarm Code
407.4.4.3, 407.4.4.5, 407.4.4.5.1, 411.5, 505.2.3, 901.1.1, 901.6, 903.4.1, 904.3.5, 907.1, 907.2, 907.2.1.1, 907.2.2, 907.2.7, 907.2.8.4, 907.2.11, 907.2.12.1, 907.2.13.3, 907.3, 907.3.3, 907.3.4, 907.5.2.1.2, 907.5.2.2, 907.6, 907.6.1, 907.6.5, 907.7, 907.7.1, 907.7.2, 911.1.5, 911.1.6, 911.2, 915.7, 916.1, 3005.5, 3007.7 Q101.1, Q102.1, Q107.1
80—13
Standard for Fire Doors and Other Opening Protectives
410.3.5, 509.4.2, 713.7, 716.5, 716.5.7, 716.5.8.1, 716.5.9.2, 716.6, 716.6.4, 1010.1.4.3
82—14
Standard on Incinerators and Waste and Linen Handling Systems and Equipment
713.13
85—15
Boiler and Combustion System Hazards Code
426.1
92—18*
* As modified in Appendix Q
Standard for Smoke Control Systems
901.1.1, 909.7, 909.8, 909.10.1, Q101.1, Q108.1
99—15
Health Care Facilities Code
908.8, 407.10, 425.1
101—15
Life Safety Code
1029.6.2
105—13
Standard for Smoke Door Assemblies and Other Opening Protectives
405.4.2, 710.5.2.2, 716.5.3.1, 909.20.4.1
110—13
Standard for Emergency and Standby Power Systems
1705.36, 2702.1, 2702.4.2
111—13
Standard on Stored Electrical Energy Emergency and Standby Power Systems
1704.31, 1705.36, 2702.1
120—15
Standard for Fire Prevention and Control in Coal Mines
426.1
170—15
Standard for Fire Safety and Emergency Symbols
1025.2.6.2 1025.3.1 1025.6.1
211—13
Standard for Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances
2112.5
221—15
Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls
706.2
252—12
Standard Methods of Fire Tests of Door Assemblies
715.4.2, 715.4.3, 715.4.7.3.1, Table 716.3, 716.3.1, 716.4, 716.5.1, 716.5.2, 716.5.3, 716.5.5.1, 716.5.8.1.1
253—15
Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source
406.8.3, 424.2, 804.2
255—06
Standard Method of Test Surface Burning Characteristics of Building Materials
K1
257—12
Standard for Fire Test for Window and Glass Block Assemblies
Table 716.3, 716.3.2, 716.4, 716.5.3.2, 716.6, 716.6.1, 716.6.2, 716.6.7.3
259—13
Standard Test Method for Potential Heat of Building Materials
2603.4.1.10, 2603.5.3
265—11
Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Wall Coverings on Full Height Panels and Walls
803.1.3, 803.1.3.1
268—12
Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source
1406.2.1.1, 1406.2.1.1.1, 1406.2.1.1.2, 2603.5.7
269—12
Standard Test Method for Developing Toxic Potency Data for Use in Fire Hazard Modeling
803.14
276—11
Standard Method of Fire Tests for Determining the Heat Release Rate of Roofing Assemblies With Combustible Above-Deck Roofing Components
1508.1, 2603.3, 2603.4.1.5
285—12
Standard Fire Test Method for the Evaluation of Fire Propagation Characteristics of Exterior Nonload-bearing Wall Assemblies Containing Combustible Components
1401.2, 1403.5, 1403.5.1, 1407.11, 1409.11, 2601.2.1, 2603.5.5
286—15
Standard Methods of Fire Test for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
402.6.4.4, 803.1.2, 803.1.2.1, 803.11, 2603.7.2, 2603.9, 2604.2.4, 2614.4
288—12
Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Fire-resistance-rated Floor Systems
712.1.13.1
289—13
Standard Method of Fire Test for Individual Fuel Packages
402.6.2, 424.2
409—11
Standard for Aircraft Hangars
412.4.6, Table 412.4.6, 412.4.6.1, 412.6.5
418—11
Standard for Heliports
412.8.4
484—15
Standard for Combustible Metals
426.1
654—13
Standard for the Prevention of Fire & Dust Explosions from the Manufacturing, Processing and Handling of Combustible Particulate Solids
426.1
655—12
Standard for the Prevention of Sulfur Fires and Explosions
426.1
664—12
Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities
426.1
701—10
Standard Method of Fire Tests for Flame-Propagation of Textiles and Films
424.2, 3102.3.1, 3102.6.1.1, 3105.3, 3301.9.1.3, 3301.9.2.3, 3307.2.3, 3307.4.7, 3308.3.4, 3314.8.2, 3315.1.6, 3315.2.3, H114.2, H114.2.2, H117.4
704—12
Standard System for the Identification of the Hazards of Materials for Emergency Response
202 (hazardous production material; laboratory chemical), 415.5.2, 427.4
720—15
Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment
915.5.4, 915.6.1, 915.6.2, 915.7
1124—17
Code for the Manufacture, Transportation and Storage of Fireworks and Pyrotechnic Articles
415.6.1.1
PCI
Precast Prestressed Concrete Institute 200 West Adams Street, Suite 2100 Chicago, IL 60606-6938
Standard reference number
Title
Referenced in code section number
MNL 124—11
Design for Fire Resistance of Precast Prestressed Concrete
722.2.3.1
MNL 128—01
Recommended Practice for Glass Fiber Reinforced Concrete Panels
1903.3
PTI
Post-Tensioning Institute 38800 Country Club Drive Farmington Hills, MI 48331
Standard reference number
Title
Referenced in code section number
PTI DC—35.1-14
Recommendations for Prestressed Rock and Soil Anchors
1815.1, 1815.3, 1815.4.5, 1815.5
RCSC
Research Council on Structural Connections One East Wacker Drive, Suite 700 Chicago, IL 60601
Standard reference number
Title
Referenced in code section number
RCSC—14 (2015)
Specification for Structural Joints Using High-Strength Bolts
Table 1705.2
RMI
Rack Manufacturers Institute 8720 Red Oak Boulevard, Suite 201 Charlotte, NC 28217
Standard reference number
Title
Referenced in code section number
ANSI/MH16.1—12
Specification for Design, Testing and Utilization of Industrial Steel Storage Racks
2209.1
SBCA
Structural Building Components Association 6300 Enterprise Lane Madison, WI 53719
Standard reference number
Title
Referenced in code section number
ANSI/FS 100-12
Standard Requirements for Wind Pressure Resistance of Foam Plastic Insulating Sheathing Used in Exterior Wall Covering Assemblies
2603.10
SDI
Steel Deck Institute P. O. Box 426 Glenshaw, PA 15116
Standard reference number
Title
Referenced in code section number
NC—17
Standard for Noncomposite Steel Floor Deck
2210.1.1.1
RD—17
Standard for Steel Floor Deck
2210.1.1.2
SDI-C—2017
Standard for Composite Steel Floor Deck Slabs
2210.1.1.3
SDI-QA/QC—2017
Standard for Quality Control and Quality Assurance for Installation of Steel Deck
1705.2.1.2
SJI
Steel Joist Institute 1173B London Links Drive Forest, VA 24551
Standard reference number
Title
Referenced in code section number
SJI 100—15
Standard Specification Load Tables and Weight Tables for Steel Joists and Joist Girders K-Series, LH-Series, DHL-Series, Joist Girders - 44th Edition
1604.3.3, 2203.2, 2207.1
SJI 200—15
Standard Specification for Composite Steel Joists - CJ-Series
1604.3.3
SPRI
Single-Ply Roofing Institute 411 Waverly Oaks Road, Suite 331B Waltham, MA 02452
Standard reference number
Title
Referenced in code section number
ANSI/SPRI/FM 4435-ES-1—11
Wind Design Standard for Edge Systems Used with Low Slope Roofing Systems
1504.5
ANSI/SPRI RP-4—13
Wind Design Guide for Ballasted Single-ply Roofing Systems
1504.4
ANSI/SPRI VF1—10
External Fire Design Standard for Vegetative Roofs
1507.16.1
RP-14—16
Wind Design Standards for Vegetative Roofing Systems
1507.16.1
TIA
Telecommunications Industry Association 1320 N. Courthouse Road Arlington, VA 22201-3834
Standard reference number
Title
Referenced in code section number
222-G—05
Structural Standards for Antenna Supporting Structures and Antennas, including—Addendum 1, 222-G-1, Dated 2007, Addendum 2, 222-G-2 Dated 2009, Addendum 3, 222-3 dated 2013 and Addendum 4, 222-G-4 dated 2014
1609.1.1
TIA-222-H—17
Standard for Antennas and the Supporting Structures for Antennas and Small Wind Turbines
1609.1.1, 3108.1, 3108.2, 3108.4
TMS
The Masonry Society 105 South Sunset Street, Suite Q Longmont, CO 80501
Standard reference number
Title
Referenced in code section number
216—2013
Standard Method for Determining Fire Resistance of Concrete and Masonry Construction Assemblies
Table 721.1(2), 722.1
302—2012
Standard Method for Determining the Sound Transmission Class for Masonry Walls
1207.2.1
402—2016*
* As modified in Chapter 21
Building Code Requirements and Specifications for Masonry Structures
1405.6, 1405.6.2, 1405.10, 1604.3.4, 1705.4.1, Table 1705.4.1, 1705.4.3, Table 1705.4.3 2101.2, 2104.1, 2106.1, 2107.1, 2107.2, 2107.3, 2107.4, 2108.1, 2108.2, 2108.3, 2109.1, 2109.1.1, 2109.1.1.1, 2109.2, 2109.2.1, 2110.1
403—2017
Direct Design Handbook for Masonry Structures
2101.2
404—2016
Standard for the Design of Architectural Cast Stone
2101.2
504—2016
Standard for the Fabrication of Architectural Cast Stone
2103.1
602—2016
Specification for Masonry Structures
1405.6.1, Table 1705.4.1, Table 1705.4.3, 2103.1, 2103.2.1, 2103.3, 2103.4, 2104.1, 2104.2, 2104.3, 2104.5, 2105.1, 2105.2
604—2016
Standard for the Installation of Architectural Cast Stone
2104.1
TPI
Truss Plate Institute 218 N. Lee Street, Suite 312 Alexandria, VA 22314
Standard reference number
Title
Referenced in code section number
TPI 1—2014
National Design Standard for Metal-plate-connected Wood Truss Construction
2303.4.6, 2306.1
UL
UL LLC 333 Pfingsten Road Northbrook, IL 60062-2096
Standard reference number
Title
Referenced in code section number
9—2009
Fire Tests of Window Assemblies
Table 716.3, 716.3.2, 716.4, 716.5.3.2, 716.6, 716.6.1, 716.6.2, 716.6.8.1
10A—2009
Tin Clad Fire Doors
716.5
10B—2008
Fire Tests of Door Assemblies—with Revisions through April 2009
Table 716.3, 716.5.2, 716.5.5.1, 716.5.8.1.1.
10C—2009
Positive Pressure Fire Tests of Door Assemblies
716.5.1, 716.5.3, 716.5.5.1, 716.5.8.1.1, 1010.1.10.1
14B—2008
Sliding Hardware for Standard Horizontally mounted Tin Clad Fire Doors—with Revisions Through May 3, 2013
716.5
14C—06
Swinging Hardware for Standard Tin Clad Fire Doors Mounted Singly and in Pairs—with Revisions through May 2013
716.5
55A—04
Materials for Built-Up Roof Coverings
1507.10.2
103—2010
Factory-built Chimneys, for Residential Type and Building Heating Appliances—with Revisions through July 2012
718.2.5.1
127—2011
Factory-built Fireplaces
718.2.5.1, 2111.12
214—01
Standard for Tests for Flame-propagation of Fabrics and Films
3301.9.1.3, 3301.9.2.3, H114.2, H117.4
217—16
Single and Multiple Station Smoke Alarms, 8th Edition
907.2.11, 907.2.11.6, 915.5.3
263—11
Standard for Fire Tests of Building Construction and Materials
703.2, 703.2.1, 703.2.3, 703.2.5, 703.3, 703.4, 703.6, 704.12, 705.7, 705.8.5, 707.6, 712.1.13.2, 714.1, 715.5.1, 716.2, Table 716.3, 716.5.6, 716.5.8.1.1, Table 716.6, 716.6.7.1, 717.3.1, 717.5.2, 717.5.3, 717.6.1, 717.6.2.1, Table 721.1(1), 1407.10, 1409.10, 2103.1, 2603.4, 2603.5.1, 2603.5.2
268—16
Smoke Detectors for Fire Alarm Systems, 7th Edition
407.8, 907.2.11.6, 907.2.11.7, 915.6.3
294—1999
Access Control System Units—with Revisions through September 2010
1010.1.9.6, 1010.1.9.7, 1010.1.9.8, 1010.1.9.9
300—05 (R2010)
Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment—with Revisions through July 16, 2010
904.12
300A—06
Outline of Investigation for Extinguishing System Units for Residential Range Top Cooking Surfaces
407.2.6, 904.13
305—2012
Panic Hardware
1010.1.10.3
325—02
Door, Drapery, Gate, Louver and Window Operations and Systems— with Revisions through June 2013
3110.3.1, 3110.4, 406.3.5
555—2006
Fire Dampers—with Revisions through May 2012
717.3.1
555C—2006
Ceiling Dampers—with Revisions through May 2010
717.3.1
555S—99
Smoke Dampers—with Revisions through May 2012
717.3.1
580—2006
Test for Uplift Resistance of Roof Assemblies—with Revisions through July 2009
1504.3.1, 1504.3.2
641—2010
Type L Low-temperature Venting Systems—with Revisions through June 2013
2113.11.1.4
723—2008
Standard for Test for Surface Burning Characteristics of Building Materials—with Revisions through September 2010
202, (flame spread index), 402.6.4.4, 402.6.2, 703.5.2, 720.1, 803.1.1, 803.1.2, 803.1.4, 803.10, 803.11, 806.7, 1404.12.1, 1407.9, 1409.9, 1409.10.1, 1510.10.3, 2303.2, 2603.3, 2603.4.1.13, 2606.3.5.4, 2606.3.5.5, 2603.7, 2603.7.1, 2603.7.2, 2603.7.3, 2604.2.4, 2606.4, 2612.3, 2614.3, 3105.3, K1
790—04
Standard Test Methods for Fire Tests of Roof Coverings—with Revisions through October 2008
1505.1, 2603.6, 2610.2, 2610.3
793—08
Standards for Automatically Operated Roof Vents for Smoke and Heat—with Revisions through September 2011
910.3.1
864—03
Standards for Control Units and Accessories for Fire Alarm Systems—with Revisions through December 2014
406.8.5.1.1, 909.12, 909.12.4.1
924—06
Standard for Safety Emergency Lighting and Power Equipment—with Revisions through February 2011
1013.5
1040—96
Fire Test of Insulated Wall Construction—with Revisions through October 2012
2603.4, 2603.5.2, 2603.9
1256—02
Fire Test of Roof Deck Construction—with Revisions through January 2007
1508.1, 2603.3, 2603.4.1.5
1275—05
Flammable Liquid Storage Cabinets
427.4
1479—03
Fire Tests of Through-penetration Firestops—with Revisions through October 2012
202 (F rating, L rating, T rating, through- penetration firestop system), 714.3.1.2, 714.3.2, 714.4.1.2, 714.4.3
1482—2011
Solid-Fuel-type Room Heaters—with Revisions through August 2015
2112.2
1703—02
Flat-Plate Photovoltaic Modules and Panels
1505.9, 1507.17.6, 1510.11.4
1715—97
Fire Test of Interior Finish Material—with Revisions through January 2013
1407.10, 1409.10, 2603.4, 2603.5.2, 2603.9, 2614.4
1777—2007
Chimney Liners—with Revisions through October 2015
2113.11.1, 2113.19
1784—01
Air Leakage Tests of Door Assemblies—with Revisions through July 2009
710.5.2.2, 710.5.2.2.1, 716.5.3.1, 716.5.7.1, 1016.3.1, 1016.3.2, 3006.1.1, 3007.6, 3007.6.3, 3008.7.3
1897—12
Uplift Tests for Roof Covering Systems
1504.3.1
1975—06
Fire Test of Foamed Plastics Used for Decorative Purposes
402.6.2, 402.6.4.5, 424.2
1994—04
Standard for Luminous Egress Path Marking Systems—with Revisions through November 2010
411.7, 1025.2.1, 1025.2.3, 1025.2.4, 1025.4
2017—2008
Standards for General-purpose Signaling Devices and Systems—with Revisions through May 2011
3109.5.1.8 406.8.5.1.1
2034—08
Standard for Single- and Multiple-Station Carbon Monoxide Alarm—with Revisions through March 2015
915.5.2, 915.5.3
2075—2013
Standard for Gas and Vapor Detectors and Sensors
406.8.5.1.1, 915.6.1, 915.6.3
2079—04
Tests for Fire Resistance of Building Joint Systems—with Revisions through December 2012
202 (fire-resistant joint system, l rating), 715.3, 715.6
2196—2017
Tests for Fire Resistive Cables
909.20.6.1
2200—2012
Stationary Engine Generator Assemblies—with Revisions through June 2013
2702.1.2, 2702.4.1
ULC
Underwriters Laboratories of Canada 7 Underwriters Road Toronto, Ontario, Canada M1R3B4
Standard reference number
Title
Referenced in code section number
CAN/ULC S 102.2—2010
Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings and Miscellaneous Materials and Assemblies—with 2000 Revisions
720.2, 720.3, 720.4
CAN/ULC S635—16
Standard for Lining Systems for Existing Masonry or Factory-built Chimneys and Vents
2113.11.1.2, 2113.19
USC
United States Code c/o Superintendent of Documents U.S. Government Printing Office 732 North Capitol Street NW Washington, DC 20401
Standard reference number
Title
Referenced in code section number
18 USC Part 1, Ch.40
Importation, Manufacture, Distribution and Storage of Explosive Materials
202 (explosive)
WCLIB
West Coast Lumber Inspection Bureau P. O. Box 23145 Portland, OR 97281
Standard reference number
Title
Referenced in code section number
AITC 104—03
Typical Construction Details
2306.1
AITC 110—01
Standard Appearance Grades for Structural Glued Laminated Timber
2306.1
AITC 113—10
Standard for Dimensions of Structural Glued Laminated Timber
2306.1
AITC 117—15
Standard Specifications for Structural Glued Laminated Timber of Softwood Species
2306.1
AITC 119—96
Standard Specifications for Structural Glued Laminated Timber of Hardwood Species
2306.1
AITC 200—09
Manufacturing Quality Control Systems Manual for Structural Glued Laminated Timber
2306.1
WDMA
Window and Door Manufacturers Association 2025 M Street, NW Suite 800 Washington, DC 20036-3309
Standard reference number
Title
Referenced in code section number
AAMA/WDMA/CSA 101/I.S.2/A440—11
Specifications for Windows, Doors and Unit Skylights
1709.5.1, 2405.5
Collected 2026-09-06T02:48:57Z. Source file · JSON