GroundRules
N.Y.C. Admin. Code § MC 1502: Section MC 1502: Standards
Where this section sits in the code
- New York City Administrative Code
- Title 28
- Chapter 8: New York City Mechanical Code
ACCA
Air Conditioning Contractors of America 2800 Shirlington Road, Suite 300 Arlington, VA 22206
Standard Reference Number
Title
Referenced in code section number
Manual D—2011
Residential Duct Systems
603.2
183—2007 (reaffirmed 2011)
Peak Cooling and Heating Load Calculations in Buildings Except Low-rise Residential Buildings
312.1
AHRI
Air-Conditioning, Heating and Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203
Standard Reference Number
Title
Referenced in code section number
700—2011 With Addendum 1
Purity Specifications for Fluorocarbon and Other Refrigerants
1102.2.2.3
AMCA
Air Movement and Control Association International 30 West University Drive Arlington Heights, IL 60004
Standard Reference Number
Title
Referenced in code section number
550—18
Test Method for High Velocity Wind Driven Rain Resistant Louvers
401.6.1, 501.3.2, 501.3.2.1
ANSI
American National Standards Institute 11 West 42nd Street New York, NY 10036
Standard Reference Number
Title
Referenced in code section number
ANSI/ASA S2.71—1983 (R2012)
Guide to the Evaluation of Human Exposure to Vibration in Buildings
313.3
ANSI/ASHRAE/ ASHE 170—2008
Ventilation of Health Care Facilities
401.4
Z21.8—1994 (R2002)
Installation of Domestic Gas Conversion Burners
919.1, 1004.9
Z21.50—2012
Vented Gas Fireplaces
901.6
Z21.60—2012
Decorative Gas Appliances for Installation in Solid-Fuel-Burning Fireplaces.
901.6
ASHRAE
ASHRAE 1791 Tullie Circle, NE Atlanta, GA 30329
Standard Reference Number
Title
Referenced in code section number
ASHRAE—2005
ASHRAE Fundamentals Handbook—2005
603.2
15—2022
Safety Standard for Refrigeration Systems
1101.6, 1101.11, 1104.2, 1105.3, 1105.7, 1105.8, 1105.11, 1108.1
34—2022
Designation and Safety Classification of Refrigerants
202 (FLAMMABILITY CLASSIFICATION; REFRIGERANT SAFETY CLASSIFICATIONS; TOXICITY CLASSIFICATION), 1102.2.1, 1103.1, Table 1103.1, 1104.1
52.2—2012
Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
605.2.1
62.1—2016
Ventilation for Acceptable Indoor Air Quality
403.2, 403.3.1.1 403.3.1.1.2.3.2, 501.3.1, 514.4, 601.4, 605.2.1
62.2—2016
Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings
605.2.1
ANSI/ASHRAE/ ASHE 170—2008
Ventilation of Health Care Facilities
401.4
ASME
American Society of Mechanical Engineers Three Park Avenue New York, NY 10016-5990
Standard Reference Number
Title
Referenced in code section number
B1.20.1—-1983 (R2006)
Pipe Threads, General Purpose (Inch)
1203.3.5, 1303.3.3
B16.3—2011
Malleable Iron Threaded Fittings, Classes 150 & 300
Table 1202.5
B16.5—2009
Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24
Table 1202.5, Table 1302.5
B16.9—2007
Factory Made Wrought Steel Buttwelding Fittings
Table 1202.5, Table 1302.5
B16.11—2011
Forged Fittings, Socket-welding and Threaded
Table 1202.5, Table 1302.5
B16.15—2011
Cast Bronze Threaded Fittings
Table 1202.5, Table 1302.5
B16.18—2012
Cast Copper Alloy Solder Joint Pressure Fittings
Table 1202.5, Table 1302.5
B16.22—(R2010)
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
Table 1202.5, Table 1302.5
B16.24—2011
Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500 and 2500
Table 1202.5, Table 1302.5
B16.26—2011
Cast Copper Alloy Fittings for Flared Copper Tubes
Table 1202.5
B16.28—1994
Wrought Steel Buttwelding Short Radius Elbows and Returns
Table 1202.5, Table 1302.5
B16.39—2014
Malleable Iron Threaded Pipe Unions
1203.1.2
B31.1—2012
Power Piping Code
1201.3, 1211.2.1, 1211.2.2, 1211.2.3
B16.51—2011
Copper and Copper Alloy Press-Connect Pressure Fittings
Table 1202.5
B31.5—2010
Refrigeration Piping and Heat Transfer Components
1107.1
B31.9—2011
Building Services Piping
1201.3
B40.100—2013
Pressure Gauges and Gauge Attachments
1011.2
BPVC—2010/2011 addenda
ASME Boiler & Pressure Vessel Code
1002.2, 1003.1, 1003.2, 1003.3, 1004.1, 1004.1.1, 1006.1, 1006.2, 1006.3, 1006.4, 1009.2, 1010.2.1, 1011.1, 1107.5.4, 1203.3.1, 1203.3.6, 1211.2.2, 1303.1, 1303.3.1, 1303.3.4, 1305.12.2, 1305.14, Figure C101.1(1), Figure C101.1(3)
CSD-1—2011
Controls and Safety Devices for Automatically Fired Boilers
1004.1, 1004.1.1, 1004.8, 1006.1, 1006.2, 1006.3, 1006.4, 1007.1, 1007.2, 1007.3, 1010.2.1, 1011.1
ASNT
American Society for Nondestructive Testing PO Box 28518 1/11 Arlington Lane Columbus, OH 43228
Standard Reference Number
Title
Referenced in code section number
SNT—TC—1A— 2016
Recommended Practice
1211.2.2
ASSE
American Society of Sanitary Engineers 901 Canterbury, Suite A Westlake, OH 44145
Standard Reference Number
Title
Referenced in code section number
1017—2010
Performance Requirements for Temperature Actuated Mixing Values for Hot Water Distribution Systems
1002.2.2
ASTM
ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428
Standard Reference Number
Title
Referenced in code section number
A 53/A 53M—12
Specification for Pipe, Steel, Black and Hot-dipped, Zinc-coated Welded and Seamless
Table 1202.4, Table 1202.5, Table 1302.3, Table 1302.5, 1305.9.5
A 106/A106M—11
Specification for Seamless Carbon Steel Pipe for High-Temperature Service
Table 1202.4, Table 1202.5, Table 1302.3, Table 1302.5, 1305.9.5
A 126—09
Specification for Gray Iron Castings for Valves, Flanges and Pipe Fittings
Table 1202.5
A 234/A234M—11a
Standard Specification for Piping Fittings of Wrought Carbon Steel And Alloy Steel For Moderate and High Temperature Service
Table 1202.5, Table 1302.5
A 254—97 (2007)
Specification for Copper Brazed Steel Tubing
Table 1202.4, Table 1302.3
A 395/A395M—99 (2009)
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
Table 1202.5
A 420/A 420M—10A
Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
Table 1202.5, Table 1302.5
A 536—84 (2009)
Standard Specification for Ductile Iron Castings
Table 1202.5
B 32—08
Specification for Solder Metal
1203.3.3, 1107.5.5
B 42—10
Specification for Seamless Copper Pipe, Standard Sizes
1107.5.2, Table 1202.4, Table 1302.3
B 43—09
Specification for Seamless Red Brass Pipe, Standard Sizes
1107.5.2, Table 1202.4, Table 1302.3
B 75—11
Specification for Seamless Copper Tube
Table 1202.4, Table 1302.3
B 88—09
Specification for Seamless Copper Water Tube
1107.5.3, Table 1202.4, Table 1302.3
B 135—10
Specification for Seamless Brass Tube
Table 1202.4
B 251—10
Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube
Table 1202.4
B 280—08
Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
1107.5.3, Table 1302.3
B 302—12
Specification for Threadless Copper Pipe, Standard Sizes
Table 1202.4, Table 1302.3
B 813—10
Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
1203.3.3, 1107.5.5
C 315—07 (2011)
Specification for Clay Flue Liners and Chimney Pots
801.16.1, Table 803.10.4
C 411—11
Test Method for Hot-surface Performance of High-temperature Thermal Insulation
604.3
D 56—05 (2010)
Test Method for Flash Point by Tag Closed Tester
202 (FLASHPOINT)
D 93—12
Test Method for Flash Point of Pensky-Martens Closed Cup Tester
202 (FLASHPOINT)
D 1527—99 (2005)
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
Table 1202.4
D 1785—12
Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80 and 120
Table 1202.4, Table 1210.4
D 2235—04 (2011)
Specifications for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
1203.3.4
D 2241—09
Specification for Poly (Vinyl Chloride) (PVC) Pressure-rated Pipe (SDR-Series)
Table 1202.4, Table 1210.4
D 2412—11
Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-plate Loading
603.8.3
D 2466—06
Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
Table 1202.5, Table 1210.5
D 2467—06
Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
Table 1202.5, Table 1210.5
D 2564—12
Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
1203.3.4
D 2657—07
Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
1210.6.6.1
D 2683—2010E1
Specification for Socket-type Polyethylene Fittings for Outside Diameter-controlled Polyethylene Pipe and Tubing
Table 1210.5, 1210.6.6.1
D 2737—12A
Standard Specification for Polyethylene (PE) Plastic Tubing
Table 1210.4
D 2846/D 2846M—09BE1
Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems
Table 1202.4, Table 1210.4, Table 1210.5
D 2996—01 (2007)e01
Specification for Filament-wound Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Pipe
Table 1302.3
D 3035—2012E1
Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
Table 1210.4
D 3261—12
Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
Table 1210.5, 1210.6.6.1
D 3278—1996 (2011)
Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus
202 (FLASHPOINT)
E 84—2013A
Test Method for Surface Burning Characteristics of Building Materials
202 (FLAME SPREAD INDEX, SMOKE DEVELOPED INDEX), 510.9, 602.2, 602.2.1, 602.2.1.6, 602.2.1.6.1, 602.2.1.6.2, 602.2.1.6.3, 602.2.1.7, 604.3, 1204.1
E 119—2012a
Test Method for Fire Tests of Building Construction and Materials
607.5.2, 607.5.5, 607.6.1, 607.6.2.1, 607.2.1
E 136—2012
Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C
202 (NONCOMBUSTIBE MATERIALS)
E 814—2013
Test Method for Fire Tests of Through-penetration Fire Stops
506.3.11.1, 506.3.11.2, 506.3.11.3, 803.10.4.2
E 1509—12
Specification for Room Heaters, Pellet Fuel-burning Type
904.1
E 2231—09
Standard Practice For Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
604.3, 1204.1
E 2336—04 (2013)
Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
506.3.6, 506.3.11.2
E 2816—17
Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
803.10.4.2
F 437—09
Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
Table 1210.5
F 438—09
Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings. Schedule 40
Table 1202.5, Table 1210.5
F 439—12
Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
Table 1202.5, Table 1210.5
F 441/F 441M—13
Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
Table 1202.4, Table 1210.4
F 442/F 442M—13
Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)
Table 1202.4, Table 1210.4
F 492—95
Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings
1203.1.2
F 493—10
Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
1203.3.4
F 714—13
Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) based on Outside Diameter
Table 1210.4
F 876—13
Specification for Cross-linked Polyethylene (PEX) Tubing
Table 1202.4, Table 1210.4
F 877—2011A
Specification for Cross-linked Polyethylene (PEX) Plastic Hot and Cold Water Distribution Systems
Table 1202.4, Table 1202.5, Table 1210.4, Table 1210.5
F 1055—13
Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Cross-linked Polyethylene Pipe and Tubing
Table 1210.5, 1210.6.6.2
F 1281—11
Specification for Cross-linked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
Table 1202.4
F 1282—10
Standard Specification for Polyethylene/Aluminum/ Polyethylene (PE-AL-PE) Composite Pressure Pipe
Table 1202.4, Table 1210.4, Table 1210.5
F 1476—07
Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
Table 1202.5, 1203.3.7
F 1548—01 (2006)
Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
Table 1202.5
F 1807—13
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR 9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
Table 1202.5, Table 1210.5
F 1924—12
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
1210.6.6.3
F1960—12
Specification for Cold-Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
Table 1210.5
F 1974—09
Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene Composite Pressure Pipe
Table 1202.5
F 2080—12
Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Cross-linked Polyethylene (PEX) Pipe
Table 1210.5
F 2098—08
Standard Specification for Stainless Steel Clamps for SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal and Plastic Insert Fittings
Table 1202.5
F 2159—11
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR 9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
Table 1202.5, Table 1210.5
F 2389—10
Specification for Pressure-rated Polypropylene Piping Systems
Table 1202.4, Table 1202.5, 1203.15.1, Table 1210.4, Table 1210.5, 1210.6.7.1
F2434—09
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
Table 1210.5
F 2623—08
Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
Table 1202.4, Table 1210.4
F 2735—09
Standard Specification for Plastic Insert Fittings for SDR 9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
Table 1202.5
F 2769—10
Polyethylene of Raised Temperature (PE-RT) Plastic Hot- and Cold-water Tubing and Distribution Systems
Table 1202.4, Table 1202.5
F 2806—10
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
Table 1202.4
AWS
American Welding Society 8669 NW 36 Street, #130 Doral, FL 33166
Standard Reference Number
Title
Referenced in code section number
B2.1—2014
Specification for Brazing Procedure and Performance Qualification
1203.3.6
B2.2—2016
Specification for Brazing Procedure and Performance Qualification
1107.5.4, 1203.3.1, 1303.1, 1303.3.1
AWWA
American Water Work Association 6666 West Quincy Avenue Denver, CO 80235
Standard Reference Number
Title
Referenced in code section number
C901—08
Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in. (13 mm) through 3 in. (76 mm) for Water Service
Table 1210.4
C110/A21.10—12
Standard for Ductile Iron & Gray Iron Fittings
Table 1202.5
C115/A21.15—11
Standard for Flanged Ductile-Iron Pipe with Ductile Iron or Grey-Iron Threaded Flanges
Table 1202.4
C151/A21.51—09
Standard for Ductile-Iron Pipe, Centrifugally Cast for Water
Table 1202.4
C153/A21.53—11
Standard for Ductile-Iron Compact Fittings for Water Service
Table 1202.5
BSI
BSI Standards (British Standards Institution) 12950 Worldgate Drive, Suite 800 Herndon, VA 20170
Standard Reference Number
Title
Referenced in code section number
EN 378-1—2016
Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 1: Basic Requirements, Definitions, Classification and Selection Criteria
1107.9.1, 1107.9.2, 1107.9.2.1
EN 378-3—2016
Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 3: Installation Site and Personal Protection
1107.9.2.2, 1107.9.3, 1107.9.4, 1107.9.5
CAN/ULC
Standards Council of Canada 270 Albert Street, Suite 200 Ottawa ON KIP 6N7 Canada
Standard Reference Number
Title
Referenced in code section number
S635—16
Standard for Lining Systems for Existing Masonry or Factory-Built Chimneys and Vents
801.16.1, 801.18.4
S640—16
Standard for Lining Systems for New Masonry Chimneys
801.16.1
S667—11
Metallic Underground Piping for Flammable and Combustible Liquids
1302.9.1
CSA
CSA Group 8501 East Pleasant Valley Road Cleveland, OH 44131-5516
Standard Reference Number
Title
Referenced in code section number
B137.2—13
Polyvinylchloride (PVC) Injection-moulded Gasketed Fittings for Pressure Applications
Table 1210.5
B137.3—13
Rigid Poly (Vinyl Chloride) (PVC) Pipe for Pressure Applications
Table 1210.5
B137.6—13
Chlorinated Polyvinylchloride (CPVC) Pipe, Tubing and Fittings for Hot- and Cold-water Distribution Systems
Table 1210.5
B137.9—13
Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure-Pipe Systems
Table 1202.4, Table 1210.4, Table 1210.5
B137.10—13
Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Composite Pressure-Pipe Systems
Table 1202.4
CSA C448 Series—02 CAN/CSA 2002
Design and Installation of Earth Energy Systems – First Edition; Update 2: October 2009; CAN/CSA 2002 Consolidated Reprint 10/2009
Table 1210.4, Table 1210.5
B137.1—13
Polyethylene (PE) Pipe, Tubing and Fittings for Cold Water Pressure Services
Table 1210.4, Table 1210.5
B137.5—13
Cross-linked Polyethylene (PEX) Tubing Systems for Pressure Applications
Table 1210.4, Table 1210.5
B137.11—13
Polypropylene (PP-R) Pipe and Fittings for Pressure Applications
Table 1210.4, Table 1210.5
ANSI/CSA America FC1—2012
Stationary Fuel Cell Power Systems
924.1
DOL
Department of Labor Occupational Safety and Health Administration c/o Superintendent of Documents US Government Printing Office Washington, DC 20402-9325
Standard Reference Number
Title
Referenced in code section number
29 CFR Part 1910.1000 (2009)
Air Contaminants
502.6
EN
BSI Standards (British Standards Institution) 12950 Worldgate Drive, Suite 800 Herndon, VA 20170
Standard Reference Number
Title
Referenced in code section number
EN 378-1—2016
Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 1: Basic Requirements, Definitions, Classification and Selection Criteria
1107.9.1, 1107.9.2, 1107.9.2.1
EN 378-3—2016
Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 3: Installation Site and Personal Protection
1107.9.2.2, 1107.9.3, 1107.9.4, 1107.9.5
HAR
International Institute of Ammonia Refrigeration 1110 North Glebe Road Arlington, VA 22201
Standard Reference Number
Title
Referenced in code section number
2—2014
Standard for Safe Design of Closed-Circuit Ammonia Refrigeration Systems
1101.6, 1105.6.3
MSS
Manufacturers Standardization Society of the Valve & Fittings Industry, Inc. 127 Park Street, N.E. Vienna, VA 22180
Standard Reference Number
Title
Referenced in code section number
ANSI/SP-58—2009
Pipe Hangers and Supports – Materials Design and Manufacture, Selection, Application and Installation
305.4
NAIMA
North American Insulation Manufacturers Association 44 Canal Center Plaza, Suite 310 Alexandria, VA 22314
Standard Reference Number
Title
Referenced in code section number
AH116—09
Fibrous Glass Duct Construction Standards
603.5, 603.9
NBBI
National Board of Boiler and Pressure Vessel Inspectors 1055 Crupper Avenue Columbus, OH 43229-1183
Standard Reference Number
Title
Referenced in code section number
NBIC—2011
National Board Inspection Code, Part 3
1003.3, 1011.1.1, 1011.3
NFPA
National Fire Protection Association 1 Batterymarch Park Quincy, MA 02169-7471
Standard Reference Number
Title
Referenced in code section number
10—13
Portable Fire Extinguishers
1301.8
30A—15
Code for Motor Fuel-dispensing Facilities and Repair Garages
304.6
30—12
Flammable and Combustible Liquids Code
1305.8.4
31—11
Standard for the Installation of Oil-burning Equipment
801.2.4, 801.18.1, 801.18.2, 901.2, 918.1, 920.2, 1301.2, 1305.15.3, 1305.15.6, 1308.1
32—16
Standard for Drycleaning Plants
502.6
37—15
Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines
811.1, 811.2, 915.1, 915.2
45—15
Fire Protection for Laboratories Using Chemicals
408.1, 502.22
54—16
National Fuel Gas Code
504.9, 901.2, 910.7
69—14
Standard on Explosion Prevention Systems
510.9.3
82—14
Standard on Incinerators and Waste and Linen Handling Systems and Equipment
907.1, 601.1
85—15
Boiler and Combustion Systems Hazards Code
1004.1, 1004.1.1, 1004.8
91—15
Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids
502.9.5.1, 502.17
96—14
Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations
507.1
211—13
Standard for Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances
802.1, Table 803.10.6, 806.1, 811.1, 901.2
262—15
Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-handling Spaces
602.2.1.1
286—15
Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
602.2.1.6.2
704—12
Standard System for Identification of the Hazards of Materials for Emergency Response
502.8.4, 510.1, 1105.11
853—15
Standard on Installation of Stationary Fuel Power Plants
924.1
NSF
NSF International 789 Dixboro Road, P. O. Box 130140 Ann Arbor, MI 48113-0140
Standard Reference Number
Title
Referenced in code section number
NSF 358-1—2011
Polyethylene Pipe and Fittings for Water Based Ground Source "Geothermal" Heat Pump Systems
Table 1210.4, Table 1210.5
SMACNA
Sheet Metal & Air-Conditioning Contractors National Assoc., Inc. 4201 Lafayette Center Drive Chantilly, VA 20151-1209
Standard Reference Number
Title
Referenced in code section number
SMACNA/ ANSI—2005
HVAC Duct Construction Standards-Metal and Flexible 4th Edition (ANSI)
504.10, 603.4, Table 603.4, 603.9, 603.10
SMACNA/ ANSI—2011
Rectangular Industrial Duct Construction Standards
510.9.1
SMACNA/ ANSI—2013
Round Industrial Duct Construction Standards
510.9.1
SMACNA—10
Fibrous Glass Duct Construction Standards
603.5
UL
UL LLC 333 Pfingsten Road Northbrook, IL 60062-2096
Standard Reference Number
Title
Referenced in code section number
58—96
Steel Underground Tanks for Flammable and Combustible Liquids
1305.12.1, 1305.14
80—07
Steel Tanks for Oil-Burner Fuel – with revisions through August 2009
Table 1305.7(2), 1305.12.2, 1305.14, Figure C101.1(1), Figure C101.1(3)
103—2010
Factory-built Chimneys, Residential Type and Building Heating Appliance – with revisions through July 2012
805.2, 805.3, 811.1
127—2011
Factory-built Fireplaces
805.7, 903.1, 903.4
142—2006
Aboveground Tanks for Flammable and Combustible Liquids
Table 1305.7(2), 1305.8, 1305.12.2, 1305.14, Figure C101.1(2), Figure C101.1(3)
174—04
Household Electric Storage Tank Water Heaters – with revisions through September 2012
1002.1
181—2013
Factory-made Air Ducts and Air Connectors – with revisions through October 2008
512.2, 603.5, 603.6.1.1, 603.6.2, 603.11.1, 604.13
181A—2013
Closure Systems for Use with Rigid Air Ducts and Air Connectors
603.9
181B—2013
Closure Systems for Use with Flexible Air Ducts and Air Connectors
603.9
197—10
Commercial Electric Cooking Appliances – with revisions through June 2011
917.1
207—2009
Refrigerant-containing Components and Accessories, Nonelectrical
1101.2
263—2011
Standard for Fire Test of Building Construction and Materials
607.5.2, 607.5.5, 607.6.1, 607.6.2.1
268—2009
Smoke Detectors for Fire Alarm Systems
606.1
268A—2009
Smoke Detectors for Duct Application – with revisions through September 2009
606.1
378—06
Draft Equipment – with revisions through January 2010
804.3, 804.3.8
391—2010
Solid-fuel and Combination-fuel Central and Supplementary Furnaces – with revisions through March 2010
918.1
412—2011
Refrigeration Unit Coolers – with revisions through August 2012
1101.2
471—2010
Commercial Refrigerators and Freezers – with revisions through December 2012
1101.2
499—05
Electric Heating Appliances – with revisions through February 2013
912.1, 923.1
555—06
Fire Dampers – with revisions through May 2012
607.3.1
555C—06
Ceiling Dampers – with revisions through May 2010
607.3.1
555S—99
Smoke Dampers – with revisions through May 2012
607.2.1.1, 607.3.1
586—2009
High-Efficiency, Particulate, Air Filter Units
605.2
641—2010
Type L Low-temperature Venting Systems – with revisions through May 2013
802.1
705—2004
Standard for Power Ventilators – with revisions through March 2012
504.5
710—2012
Exhaust Hoods for Commercial Cooking Equipment
507.1
710B—2011
Recirculating Systems
507.1, 507.1.2, 507.2
723—2008
Standard for Test for Surface Burning Characteristics of Building Materials
202 (FLAME SPREAD INDEX), 510.9, 602.2, 602.2.1, 602.2.1.6, 602.2.1.6.1 602.2.1.6.2, 602.2.1.6.3, 602.2.1.7, 604.3, 1204.1
726—95
Oil-fired Boiler Assemblies – with revisions through April 2011
916.1, 1004.1, 1004.1.1
727—06
Oil-fired Central Furnaces – with revisions through April 2010
918.1
729—03
Oil-fired Floor Furnaces – with revisions through August 2012
910.1
730—03
Oil-fired Wall Furnaces – with revisions through August 2012
909.1
731—95
Oil-fired Unit Heaters – with revisions through August 2012
920.1
732—95
Oil-fired Storage Tank Water Heaters – with revisions through April 2010
1002.1, 1002.2
737—2011
Fireplace Stoves
905.1
762—2010
Outline of Investigation for Power Ventilators for Restaurant Exhaust Appliances
506.5.1
791—06
Residential Incinerators – with revisions through April 2010
907.1
795—16
Commercial-Industrial Gas Heating Equipment.
1004.1.1
834—04
Heating, Water Supply and Power Boilers Electric – with revisions through January 2013
1004.1
842—07
Valves for Flammable Fluids – with revisions through October 2012
1307.1
858—05
Household Electric Ranges – with revisions through April 2012
917.1
867—2011
Electrostatic Air Cleaners – with revisions through February 2013
605.2
875—09
Electric Dry Bath Heater – with revisions through November 2011
914.2
896—93
Oil-burning Stoves – with revisions through August 2012
917.1
900—04
Air Filter Units – with revisions through February 2012
605.2
907-94
Fireplace Accessories – with revisions through April 2010
902.2
923—2013
Microwave Cooking Appliances
917.1
959—2010
Medium Heat Appliance Factory-Built Chimneys
805.5
1046—2010
Grease Filters for Exhaust Ducts – with revisions through January 2012
507.2.8
1240—2012
Electric Commercial Clothes – Drying Equipment – with revisions through October 2012
913.1
1261—01
Electric Water Heaters for Pools and Tubs – with revisions through July 2012
916.1
1316—94
Glass-Fiber Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures.
1305.12.1, 1305.14
1369—2018
Standard for Aboveground Piping for Flammable and Combustible Liquids
1302.9.1
1453—04
Electric Booster and Commercial Storage Tank Water Heaters – with revisions through July 2011
1002.1
1479—03
Fire Tests of Through-penetration Firestops – with revisions through October 2012
506.3.11.2, 506.3.11.3
1482—2011
Standard for Safety Solid-Fuel Type Room Heaters
905.1
1618—09
Wall Protectors, Floor Protectors and Hearth Extensions – with revisions through May 2013
903.2, 905.3
1738—10
Standard for Venting Systems for Gas-Burning Appliances, Categories II, III, and IV
811.1
1777—2007
Chimney Liners – with revisions through July 2009
801.16.1, 801.18.4
1812—2013
Standard for Ducted Heat Recovery Ventilators
514.1
1815—2012
Standard for Nonducted Heat Recovery Ventilators
514.1
1820—04
Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics – with revisions through May 2013
602.2.1.3
1887—04
Fire Tests of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics – with revisions through May 2013
602.2.1.2
1978—2010
Grease Ducts
506.3.1.1, 506.3.2, 506.3.6
1995—2011
Heating and Cooling Equipment
911.1, 918.1, 918.2, 1002.1, 1101.2
1996—2009
Electric Duct Heaters – with revisions through November 2011
911.1
2024—2011
Standard for Safety Optical-Fiber and Communications Cable Raceway – with revisions through April 2011
602.2.1.1
2039—2016
Flexible Connector Piping for Fuels
1302.8
2043—2008
Fire Test for Heat and Visible Smoke Release for Discrete Products and their Accessories Installed in Air-handling Spaces
602.2.1.4.2, 602.2.1.5
2106—09
Standard for Field Erected Boiler Assemblies
1004.1.1
2158—97
Electric Clothes Dryers – with Revisions through March 2009
913.1
2158A—2010
Outline of Investigation for Clothes Dryer Transition Duct
504.8.3
2162—01
Outline of Investigation for Commercial Wood-fired Baking Ovens-Refractory Type
917.1
2200—2012
Stationery Engine Generator Assemblies – with revisions through June 2013
915.1, Table 1302.3
2221—2010
Tests of Fire Resistive Grease Duct Enclosure Assemblies
506.3.11.3
2258—2010
Outline of Investigation for Nonmetallic Tanks for Oil-Burner Fuels and Other Combustible Liquids
1305.12.2, 1305.15.3, 1305.15.4, 1305.15.7
2518—05
Air Dispersion System Materials
603.17
2561—16
Standard for 1400 Degree Fahrenheit Factory Built Chimneys
811.1
60335-2-40—2012
Safety of Household and Similar Electrical Appliances, Part 2-40: Particular Requirements for Electrical Heat Pumps, Air Conditioners and Dehumidifiers
918.2
Collected 2026-09-06T02:48:57Z. Source file · JSON