2VAC10-10-140: Red clover certification standards
Where this section sits in the code
- Title 2. Agriculture
- Agency 10. State Certified Seed Board
- Chapter 10. Rules and Regulations Providing for the Certification of Seeds and Other Materials Used for Plant Propagation Purposes
- Part II. Certification Standards for Specific Crops
A. General standards. The general standards as adopted in this chapter are basic and apply to red clover.
B. Land requirements.
1. For foundation seed production, the land shall have been free of red clover for the previous five years.
2. Registered seed may be produced if no red clover of any other strain has been produced on the land within the preceding three years.
3. Certified seed may be produced if no red clover crop of any other strain has been produced on the land within the preceding two years and where one cultivated crop has grown, unless the preceding strain was the same variety.
4. The land shall be free of volunteer plants of the crop kind during the year immediately prior to establishment and no manure or other contaminating material shall be applied the year previous to seed or during the establishment and productive life of the stand.
C. Field standards.
1. Field inspection. At least one field inspection, made at blooming time, is required each year that certification is applied for.
2. Isolation. All fields used for the production of foundation, registered, or certified seed shall have the minimum isolation distance from fields of any other variety or fields of the same variety that do not meet the varietal purity requirements for certification, as given in the following table:
Classes
Fields of less than 5 acres
Fields of 5 acres or more
Registered
880 yards
220 yards
Certified
110 yards
55 yards
Unit of certification. The unit of certification shall be a field. Portions of a field not meeting requirements for certification shall not be allowed to reach the seed stage. Ten feet isolation is required between certified classes of the same variety.
3. Red clover. Only two seed crops are permitted of all certified seed.
4. Specific.
Maximum Permitted-Ratio of Plants
Factor
Registered
Certified
Other Types
1:500
(0.2%)
1:200
(0.5%)
D. Seed standards
Standards for Each Class
Factor
Registered
Certified
Pure Seed (minimum)
99.0%
99.0%
Other Crops (maximum)
0.05%
0.1%
Inert Matter (maximum)
1.0%
1.0%
Weed Seed (maximum)
0.15%
0.25%
Objectionable Weed Seed
None
None
Total Germination and Hard Seeds
85.0%
85.0%
Collected 2026-09-14T04:45:09Z. Source file · JSON