GroundRules
← Search the law
Federal regulations · Through 2026-08-25 · Newer source version available

12 CFR Appendix B to Subpart A of Part 327: Appendix B to Subpart A of Part 327—Conversion of Scorecard Measures into Score

Read at publisher ↗
Where this section sits in the code
  1. Title 12—Banks and Banking
  2. CHAPTER III—FEDERAL DEPOSIT INSURANCE CORPORATION
  3. SUBCHAPTER B—REGULATIONS AND STATEMENTS OF GENERAL POLICY
  4. PART 327—ASSESSMENTS
  5. Subpart A—In General

1. Weighted Average CAMELS Rating

Weighted average CAMELS ratings between 1 and 3.5 are assigned a score between 25 and 100 according to the following equation:

S = 25 + [(20/3) * (C 2 −1)],

where:

S = the weighted average CAMELS score; and

C = the weighted average CAMELS rating.

2. Other Scorecard Measures

For certain scorecard measures, a lower ratio implies lower risk and a higher ratio implies higher risk. These measures include:

• Concentration measure;

• Credit quality measure;

• Market risk measure;

• Average short-term funding to average total assets ratio; and

• Potential losses to total domestic deposits ratio (loss severity measure).

For those measures, a value between the minimum and maximum cutoff values is converted linearly to a score between 0 and 100, according to the following formula:

S = (V −Min) * 100/(Max −Min),

where S is score (rounded to three decimal points), V is the value of the measure, Min is the minimum cutoff value and Max is the maximum cutoff value.

For other scorecard measures, a lower value represents higher risk and a higher value represents lower risk. These measures include:

• Leverage ratio;

• Core earnings to average quarter-end total assets ratio;

• Core deposits to total liabilities ratio; and

• Balance sheet liquidity ratio.

For those measures, a value between the minimum and maximum cutoff values is converted linearly to a score between 0 and 100, according to the following formula:

S = (Max −V) * 100/(Max −Min),

where S is score (rounded to three decimal points), V is the value of the measure, Max is the maximum cutoff value and Min is the minimum cutoff value.

Collected 2026-08-27T02:24:16Z. Source file · JSON

Browse this collection