GroundRules
14 CFR 25.393: Loads parallel to hinge line.
Where this section sits in the code
- Title 14—Aeronautics and Space
- CHAPTER I—FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
- SUBCHAPTER C—AIRCRAFT
- PART 25—AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES
- Subpart C—Structure
(a) Control surfaces and supporting hinge brackets must be designed for inertia loads acting parallel to the hinge line.
(b) In the absence of more rational data, the inertia loads may be assumed to be equal to KW, where—
(1) K = 24 for vertical surfaces;
(2) K = 12 for horizontal surfaces; and
(3) W = weight of the movable surfaces.
Collected 2026-08-27T02:24:20Z. Source file · JSON