GroundRules
14 CFR 27.397: Limit pilot forces and torques.
Where this section sits in the code
- Title 14—Aeronautics and Space
- CHAPTER I—FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
- SUBCHAPTER C—AIRCRAFT
- PART 27—AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT
- Subpart C—Strength Requirements
(a) Except as provided in paragraph (b) of this section, the limit pilot forces are as follows:
(1) For foot controls, 130 pounds.
(2) For stick controls, 100 pounds fore and aft, and 67 pounds laterally.
(b) For flap, tab, stabilizer, rotor brake, and landing gear operating controls, the follows apply (R = radius in inches):
(1) Crank, wheel, and lever controls, [1 + R]/3 × 50 pounds, but not less than 50 pounds nor more than 100 pounds for hand operated controls or 130 pounds for foot operated controls, applied at any angle within 20 degrees of the plane of motion of the control.
(2) Twist controls, 80R inch-pounds.
Collected 2026-08-27T02:24:20Z. Source file · JSON