14 CFR 29.1017: Oil lines and fittings.
Where this section sits in the code
- Title 14—Aeronautics and Space
- CHAPTER I—FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
- SUBCHAPTER C—AIRCRAFT
- PART 29—AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT
- Subpart E—Powerplant
(a) Each oil line must meet the requirements of § 29.993.
(b) Breather lines must be arranged so that—
(1) Condensed water vapor that might freeze and obstruct the line cannot accumulate at any point;
(2) The breather discharge will not constitute a fire hazard if foaming occurs, or cause emitted oil to strike the pilot's windshield; and
(3) The breather does not discharge into the engine air induction system.
Collected 2026-08-27T02:24:20Z. Source file · JSON