GroundRules
16 CFR 1203.5: Construction requirements—projections.
Where this section sits in the code
- Title 16—Commercial Practices
- CHAPTER II—CONSUMER PRODUCT SAFETY COMMISSION
- SUBCHAPTER B—CONSUMER PRODUCT SAFETY ACT REGULATIONS
- PART 1203—SAFETY STANDARD FOR BICYCLE HELMETS
- Subpart A—The Standard
Any unfaired projection extending more than 7 mm (0.28 in.) from the helmet's outer surface shall break away or collapse when impacted with forces equivalent to those produced by the applicable impact-attenuation tests in § 1203.17 of this standard. There shall be no fixture on the helmet's inner surface projecting more than 2 mm into the helmet interior.
Collected 2026-08-27T02:24:29Z. Source file · JSON