GroundRules
16 CFR 1630.3: General requirements.
Where this section sits in the code
- Title 16—Commercial Practices
- CHAPTER II—CONSUMER PRODUCT SAFETY COMMISSION
- SUBCHAPTER D—FLAMMABLE FABRICS ACT REGULATIONS
- PART 1630—STANDARD FOR THE SURFACE FLAMMABILITY OF CARPETS AND RUGS (FF 1-70)
- Subpart A—The Standard
(a) Summary of test method. This method involves the exposure of each of eight conditioned, replicate specimens of a given carpet or rug to a standard igniting source in a draft-protected environment, and measurement of the proximity of the charred portion to the edge of the hole in the prescribed flattening frame.
(b) Test criterion. A specimen passes the test if the charred portion does not extend to within 2.54 cm. (1.0 in.) of the edge of the hole in the flattening frame at any point.
(c) Acceptance criterion. At least seven of the eight specimens shall meet the test criterion in order to conform with this Standard.
Collected 2026-08-27T02:24:29Z. Source file · JSON