Federal regulations · Through 2026-08-25 · Newer source version available

30 CFR 250.908: What are the minimum structural fatigue design requirements?

(a) API Recommended Practice 2A-WSD (incorporated by reference, see § 250.198), requires that the design fatigue life of each joint and member be twice the intended service life of the structure.When designing your platform, the following table provides minimum fatigue life safety factors for critical structural members and joints.
If . . . Then . . .
(1) There is sufficient structural redundancy to prevent catastrophic failure of the platform or structure under consideration, The results of the fatigue analysis must indicate a minimum calculated life of twice the design life of the platform.
(2) There is not sufficient structural redundancy to prevent catastrophic failure of the platform or structure, The results of a fatigue analysis must indicate a minimum calculated life or three times the design life of the platform.
(3) The desirable degree of redundancy is significantly reduced as a result of fatigue damage, The results of a fatigue analysis must indicate a minimum calculated life of three times the design life of the platform.
(b) The documents incorporated by reference in § 250.901 may require larger safety factors than indicated in paragraph (a) of this section for some key components. When the documents incorporated by reference require a larger safety factor than the chart in paragraph (a) of this section, the requirements of the incorporated document will prevail.

Where this section sits in the code

Title 30—Mineral Resources
CHAPTER II—BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR
SUBCHAPTER B—OFFSHORE
PART 250—OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF
Subpart I—Platforms and Structures

If . . . Then . . .

(1) There is sufficient structural redundancy to prevent catastrophic failure of the platform or structure under consideration, The results of the fatigue analysis must indicate a minimum calculated life of twice the design life of the platform.

(2) There is not sufficient structural redundancy to prevent catastrophic failure of the platform or structure, The results of a fatigue analysis must indicate a minimum calculated life or three times the design life of the platform.

(3) The desirable degree of redundancy is significantly reduced as a result of fatigue damage, The results of a fatigue analysis must indicate a minimum calculated life of three times the design life of the platform.

(b) The documents incorporated by reference in § 250.901 may require larger safety factors than indicated in paragraph (a) of this section for some key components. When the documents incorporated by reference require a larger safety factor than the chart in paragraph (a) of this section, the requirements of the incorporated document will prevail.

Collected 2026-08-27T02:25:24Z. Source file · JSON

Browse this collection