GroundRules
33 CFR 183.530: Spud, pipe, and hose fitting configuration.
Where this section sits in the code
- Title 33—Navigation and Navigable Waters
- CHAPTER I—COAST GUARD, DEPARTMENT OF HOMELAND SECURITY
- SUBCHAPTER S—BOATING SAFETY
- PART 183—BOATS AND ASSOCIATED EQUIPMENT
- Subpart J—Fuel Systems
Except when used for a tank fill line, each spud, pipe, or hose fitting used with hose clamps must have:
(a) A bead;
(b) A flare; or
(c) A series of annular grooves or serrations no less than 0.015 inches deep, except a continuous helical thread, knurl, or groove.
Collected 2026-08-27T02:25:35Z. Source file · JSON