Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR 1036.10: Organization of this part.

This part is divided into the following subparts:
(a) Subpart A of this part defines the applicability of this part and gives an overview of regulatory requirements.
(b) Subpart B of this part describes the emission standards and other requirements that must be met to certify engines under this part. Note that § 1036.150 describes certain interim requirements and compliance provisions that apply only for a limited time.
(c) Subpart C of this part describes how to apply for a certificate of conformity.
(d) Subpart D of this part addresses testing of production engines.
(e) Subpart E of this part describes provisions for testing in-use engines.
(f) Subpart F of this part describes how to test your engines (including references to other parts of the Code of Federal Regulations).
(g) Subpart G of this part describes requirements, prohibitions, and other provisions that apply to engine manufacturers, vehicle manufacturers, owners, operators, rebuilders, and all others.
(h) Subpart H of this part describes how you may generate and use emission credits to certify your engines.
(i) Subpart I of this part contains definitions and other reference information.

Where this section sits in the code

Title 40—Protection of Environment
CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER U—AIR POLLUTION CONTROLS
PART 1036—CONTROL OF EMISSIONS FROM NEW AND IN-USE HEAVY-DUTY HIGHWAY ENGINES
Subpart A—Overview and Applicability

This part is divided into the following subparts:

(a) Subpart A of this part defines the applicability of this part and gives an overview of regulatory requirements.

(b) Subpart B of this part describes the emission standards and other requirements that must be met to certify engines under this part. Note that § 1036.150 describes certain interim requirements and compliance provisions that apply only for a limited time.

(d) Subpart D of this part addresses testing of production engines.

(e) Subpart E of this part describes provisions for testing in-use engines.

(f) Subpart F of this part describes how to test your engines (including references to other parts of the Code of Federal Regulations).

(g) Subpart G of this part describes requirements, prohibitions, and other provisions that apply to engine manufacturers, vehicle manufacturers, owners, operators, rebuilders, and all others.

(h) Subpart H of this part describes how you may generate and use emission credits to certify your engines.

(i) Subpart I of this part contains definitions and other reference information.

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection