Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR 1060.10: How is this part organized?

This part 1060 is divided into the following subparts:
(a) Subpart A of this part defines the applicability of part 1060 and gives an overview of regulatory requirements.
(b) Subpart B of this part describes the emission standards and other requirements that must be met to certify equipment or components under this part. Note that § 1060.110 discusses certain interim requirements and compliance provisions that apply only for a limited time.
(c) Subpart C of this part describes how to apply for a certificate of conformity.
(d) Subpart D of this part describes the requirements related to verifying that products are being produced as described in an approved application for certification.
(e) Subpart E of this part describes the requirements related to verifying that products are meeting the standards in use.
(f) Subpart F of this part describes how to measure evaporative emissions.
(g) Subpart G of this part and 40 CFR part 1068 describe requirements, prohibitions, and other provisions that apply to manufacturers, owners, operators, and all others.
(h) Subpart H of this part describes how to certify your equipment or components for inclusion in an emission averaging program allowed by an exhaust standard-setting part.
(i) Subpart I of this part contains definitions and other reference information.

Where this section sits in the code

Title 40—Protection of Environment
CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER U—AIR POLLUTION CONTROLS
PART 1060—CONTROL OF EVAPORATIVE EMISSIONS FROM NEW AND IN-USE NONROAD AND STATIONARY EQUIPMENT
Subpart A—Overview and Applicability

This part 1060 is divided into the following subparts:

(a) Subpart A of this part defines the applicability of part 1060 and gives an overview of regulatory requirements.

(b) Subpart B of this part describes the emission standards and other requirements that must be met to certify equipment or components under this part. Note that § 1060.110 discusses certain interim requirements and compliance provisions that apply only for a limited time.

(d) Subpart D of this part describes the requirements related to verifying that products are being produced as described in an approved application for certification.

(e) Subpart E of this part describes the requirements related to verifying that products are meeting the standards in use.

(f) Subpart F of this part describes how to measure evaporative emissions.

(g) Subpart G of this part and 40 CFR part 1068 describe requirements, prohibitions, and other provisions that apply to manufacturers, owners, operators, and all others.

(h) Subpart H of this part describes how to certify your equipment or components for inclusion in an emission averaging program allowed by an exhaust standard-setting part.

(i) Subpart I of this part contains definitions and other reference information.

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection