GroundRules
40 CFR 1700.29: Non-oily machinery wastewater.
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER VII—ENVIRONMENTAL PROTECTION AGENCY AND DEPARTMENT OF DEFENSE; UNIFORM NATIONAL DISCHARGE STANDARDS FOR VESSELS OF THE ARMED FORCES
- PART 1700—UNIFORM NATIONAL DISCHARGE STANDARDS FOR VESSELS OF THE ARMED FORCES
- Subpart D—Marine Pollution Control Device (MPCD) Performance Standards
The discharge of non-oily machinery wastewater must not contain any additives that are toxic or bioaccumulative in nature, and under no circumstances may oils, including oily mixtures, be discharged in quantities that:
(a) Cause a film or sheen upon or discoloration of the surface of the water or adjoining shorelines; or
(b) Cause a sludge or emulsion to be deposited beneath the surface of the water or upon adjoining shorelines; or
(c) Contain an oil content above 15 ppm as measured by EPA Method 1664a or other appropriate method for determination of oil content as accepted by the International Maritime Organization (IMO) (e.g., ISO Method 9377) or U.S. Coast Guard; or
(d) Otherwise are harmful to the public health or welfare of the United States.
Collected 2026-08-27T02:26:04Z. Source file · JSON