GroundRules
← Search the law
Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR 180.498: Sulfentrazone; tolerances for residues.

Read at publisher ↗
Where this section sits in the code
  1. Title 40—Protection of Environment
  2. CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
  3. SUBCHAPTER E—PESTICIDE PROGRAMS
  4. PART 180—TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD
  5. Subpart C—Specific Tolerances

(a) General. (1) Tolerances are established for the combined residues of the free and conjugated forms of sulfentrazone, including its metabolites and degradates, in or on the commodities in the table below. Compliance with the tolerance levels specified below is to be determined by measuring only the sum of sulfentrazone (N-[2,4-dichloro-5-[4-(difluoromethyl)-4,5-dihydro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl]phenyl]methanesulfonamide) and its metabolite HMS (N-(2,4-dichloro-5-(4-(difluoromethyl)-4,5-dihydro-3-hydroxymethyl-5-oxo-1H-1,2,4-triazol-1-yl)phenyl)methanesulfonamide, calculated as the stoichiometric equivalent of sulfentrazone in or on the following commodities.

Table 1 to Paragraph (a)(1)

Commodity Parts per million

Soybean, seed 0.05

(2) Tolerances are established for the combined residues of the free and conjugated forms of sulfentrazone, including its metabolites and degradates, in or on the commodities in the table below. Compliance with the tolerance levels specified below is to be determined by measuring only the sum of sulfentrazone (N-[2,4-dichloro-5-[4-(difluoromethyl)-4,5-dihydro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl]phenyl]methanesulfonamide) and its metabolites HMS (N-(2,4-dichloro-5-(4-(difluoromethyl)-4,5-dihydro-3-hydroxymethyl-5-oxo-1H-1,2,4-triazol-1-yl)phenyl)methanesulfonamide) and DMS (N-(2,4-dichloro-5-(4-(difluoromethyl)-4,5-dihydro-5-oxo-1H-1,2,4-triazol-1-yl)phenyl)methanesulfonamide, calculated as the stoichiometric equivalent of sulfentrazone in or on the following commodities.

Table 2 to Paragraph (a)(2)

Commodity Parts per million

Apple 0.15

Berry and small fruit, group 13-07 0.15

Brassica, leafy greens, subgroup 4-16B 0.60

Chia, seed 0.15

Corn, field, forage 0.20

Corn, field, grain 0.15

Corn, field, stover 0.30

Corn, pop, grain 0.15

Corn, pop, stover 0.3

Flax, seed 0.15

Fruit, citrus, group 10-10 0.15

Horseradish 0.20

Melon, subgroup 9A 0.15

Nut, tree, group 14-12 0.15

Pea and bean, dried shelled, except soybean, subgroup 6C 0.15

Pea, succulent 0.15

Peanut 0.20

Peanut, meal 0.40

Peppermint, tops 0.30

Rhubarb 0.15

Spearmint, tops 0.30

Stalk and stem vegetable subgroup 22A 0.15

Sugarcane, cane 0.15

Sugarcane, molasses 0.20

Sunflower subgroup 20B 0.20

Teff, forage 0.50

Teff, grain 0.15

Teff, hay 0.30

Teff, straw 1.5

Turnip, roots 0.15

Vegetable, Brassica, head and stem, group 5-16 0.20

Vegetable, fruiting, group 8-10 0.15

Vegetable, soybean, succulent 0.15

Vegetable, tuberous and corm, subgroup 1C 0.15

(b) Section 18 emergency exemptions. [Reserved]

(c) Tolerances with regional registrations. Tolerances with regional registration are established for the combined residues of the free and conjugated forms of sulfentrazone, including its metabolites and degradates, in or on the commodities in the table below. Compliance with the tolerance levels specified below is to be determined by measuring only the sum of sulfentrazone (N-[2,4-dichloro-5-[4-(difluoromethyl)-4,5-dihydro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl]phenyl]methanesulfonamide) and its metabolites HMS (N-(2,4-dichloro-5-(4-(difluoromethyl)-4,5-dihydro-3-hydroxymethyl-5-oxo-1H-1,2,4-triazol-1-yl)phenyl)methanesulfonamide) and DMS (N-(2,4-dichloro-5-(4-(difluoromethyl)-4,5-dihydro-5-oxo-1H-1,2,4-triazol-1-yl)phenyl)methanesulfonamide, calculated as the stoichiometric equivalent of sulfentrazone in or on the following commodities.

Commodity Parts per million

Bean, lima, succulent 0.15

Cowpea, succulent 0.15

Wheat, forage 0.50

Wheat, grain 0.15

Wheat, hay 0.30

Wheat, straw 1.5

(d) Indirect or inadvertent residues. Tolerances are established for inadvertent and indirect combined residues of the free and conjugated forms of sulfentrazone, including its metabolites and degradates, in or on the commodities in the table below. Compliance with the tolerance levels specified below is to be determined by measuring only the sum of sulfentrazone (N-[2,4-dichloro-5-[4-(difluoromethyl)-4,5-dihydro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl]phenyl]methanesulfonamide) and its metabolites HMS (N-(2,4-dichloro-5-(4-(difluoromethyl)-4,5-dihydro-3-hydroxymethyl-5-oxo-1H-1,2,4-triazol-1-yl)phenyl)methanesulfonamide) and DMS (N-(2,4-dichloro-5-(4-(difluoromethyl)-4,5-dihydro-5-oxo-1H-1,2,4-triazol-1-yl)phenyl)methanesulfonamide, calculated as the stoichiometric equivalent of sulfentrazone in or on the following commodities when present therein as a result of the application of sulfentrazone to growing crops.

Commodity Parts per million

Grain, cereal (excluding sweet corn), Hulls 0.30

Grain, cereal, forage, fodder and straw, group 16, except sweet corn; forage 0.2

Grain, cereal, forage, fodder and straw, group 16, except sweet corn; hay 0.2

Grain, cereal, forage, fodder and straw, group 16, except sweet corn; stover 0.1

Grain, cereal, forage, fodder and straw, group 16, except sweet corn; straw 0.6

Grain, cereal, group 15, except sweet corn 0.1

Grain, cereal, group 15, except sweet corn; bran 0.15

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection