GroundRules
40 CFR 410.55: New source performance standards (NSPS).
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS
- PART 410—TEXTILE MILLS POINT SOURCE CATEGORY
- Subpart E—Knit Fabric Finishing Subcategory
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
Simple Manufacturing Operations
Pollutant or pollutant property NSPS
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (or pounds per 1,000 lb) of product
BOD5 3.6 1.9
COD 48.1 31.0
TSS 13.2 5.9
Sulfide 0.20 0.10
Phenols 0.10 0.05
Total chromium 0.10 0.05
pH (1) (1)
1 Within the range 6.0 to 9.0 at all times.
Note: Additional allocations for “commission finishers” are not available to new sources.
Complex Manufacturing Operations
Pollutant or pollutant property NSPS
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (or pounds per 1,000 lb) of product
BOD5 4.8 2.5
COD 51.0 32.9
TSS 12.2 5.4
Sulfide 0.20 0.10
Phenols 0.10 0.05
Total Chromium 0.10 0.05
pH (1−) (1−)
1 Within the range 6.0 to 9.0 at all times.
Note: Additional allocations for “commission finishers” are not available to new sources.
Hosiery Products
Pollutant or pollutant property NSPS
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (or pounds per 1,000 lb) of product
BOD5 2.3 1.2
COD 30.7 19.8
TSS 8.4 3.7
Sulfide 0.20 0.10
Phenols 0.10 0.05
Total Chromium 0.10 0.05
pH (1−) (1−)
1 Within the range 6.0 to 9.0 at all times.
Note: Additional allocations for “commission finishers” are not available to new sources.
Collected 2026-08-27T02:26:04Z. Source file · JSON