GroundRules
← Search the law
Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR 420.21: Specialized definitions.

Read at publisher ↗
Where this section sits in the code
  1. Title 40—Protection of Environment
  2. CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
  3. SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS
  4. PART 420—IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY
  5. Subpart B—Sintering Subcategory

As used in this subpart:

(a) For the sintering subcategory, the term product means sinter agglomerated from iron-bearing materials.

(b) The term dry air pollution control system means an emission control system that utilizes filters to remove iron-bearing particles (fines) from blast furnace or sintering off-gases.

(c) The term minimum level (ML) means the level at which the analytical system gives recognizable signals and an acceptable calibration point. For 2,3,7,8-tetrachlorodibenzofuran, the minimum level is 10 pg/L per EPA Method 1613B for water and wastewater samples.

(d) The term pg/L means picograms per liter (ppt = 1.0 × 10-12 gm/L).

(e) The term sintering means a process for agglomerating iron-bearing materials into small pellets (sinter) that can be charged to a blast furnace.

(f) The term wet air pollution control system means an emission control system that utilizes water to clean process or furnace off-gases.

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection