GroundRules
40 CFR 426.113: Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS
- PART 426—GLASS MANUFACTURING POINT SOURCE CATEGORY
- Subpart K—Television Picture Tube Envelope Manufacturing Subcategory
The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable. These limitations are applicable to the abrasive polishing and acid polishing waste water streams.
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (g/kkg of furnace pull)
Fluoride 120.0 60.0
Lead 0.9 0.45
English units (lb/1,000 lb of furnace pull)
Fluoride 0.12 0.06
Lead 0.0009 0.00045
Collected 2026-08-27T02:26:04Z. Source file · JSON