40 CFR 428.103: Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS
- PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY
- Subpart J—Latex-Dipped, Latex-Extruded, and Latex-Molded Rubber Subcategory
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of raw material)
Oil and grease 2.0 0.73
BOD5 3.72 2.20
TSS 6.96 2.90
pH (1) (1)
English units (lb/1,000 lb of raw material)
Oil and grease 2.0 0.73
BOD5 3.72 2.20
TSS 6.96 2.90
pH (1) (1)
1 Within the range 6.0 to 9.0.
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to plants employing the chromic acid form-cleaning operation, by a point source subject to the provisions of this subpart after application of the best available technology economically achievable, in addition to the limitations set forth by § 428.103(a):
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of raw material)
Chromium 0.0086 0.0036
English units (lb/1,000 lb of raw material)
Chromium 0.0086 0.0036
Collected 2026-08-27T02:26:04Z. Source file · JSON