GroundRules
40 CFR 428.105: Standards of performance for new sources.
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS
- PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY
- Subpart J—Latex-Dipped, Latex-Extruded, and Latex-Molded Rubber Subcategory
(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of raw material)
Oil and grease 2.0 0.73
BOD5 3.72 2.20
TSS 6.96 2.90
pH (1) (1)
English units (lb/1,000 lb of raw material)
Oil and grease 2.0 0.73
BOD5 3.72 2.20
TSS 6.96 2.90
pH (1) (1)
1 Within the range 6.0 to 9.0.
(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to plants employing the chromic acid form-cleaning operation, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by § 428.102(a):
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of raw material)
Chromium 0.0086 0.0036
English units (lb/1,000 lb of raw material)
Chromium 0.0086 0.0036
Collected 2026-08-27T02:26:04Z. Source file · JSON