GroundRules
40 CFR 465.15: Pretreatment standards for new sources.
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS
- PART 465—COIL COATING POINT SOURCE CATEGORY
- Subpart A—Steel Basis Material Subcategory
Except as provided in CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources. The mass of wastewater pollutants in coil coating process wastewater introduced into a POTW shall not exceed the following values:
Subpart A
Pollutant or pollutant property PSNS
Maximum for any 1 day Maximum for monthly average
mg/m 2 (pounds per 1 million ft 2) of area processed
Chromium 0.12 (0.024) 0.047 (0.01)
Cyanide 0.063 (0.013) 0.025 (0.005)
Zinc 0.33 (0.066) 0.14 (0.027)
Collected 2026-08-27T02:26:04Z. Source file · JSON