GroundRules
← Search the law
Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR 467.36: Pretreatment standards for new sources.

Read at publisher ↗
Where this section sits in the code
  1. Title 40—Protection of Environment
  2. CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
  3. SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS
  4. PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY
  5. Subpart C—Extrusion Subcategory

(a) Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources.

(b) There shall be no discharge allowance for wastewater pollutants from the degassing operation.

(c) The mass of wastewater pollutants from the core and ancillary operations except those identified in paragraph (b) introduced into a POTW shall not exceed the values set forth below:

Subpart C

Core

Pollutant or pollutant property PSNS

Maximum for any 1 day Maximum for monthly average

mg/off-kg (lb/million off-lbs) of extruded

Chromium 0.13 0.05

Cyanide 0.07 0.03

Zinc 0.35 0.15

TTO 0.24

Oil and grease (alternate monitoring parameter) 3.40 3.40

Subpart C

Extrusion Press Leakage

Pollutant or pollutant property PSNS

Maximum for any 1 day Maximum for monthly average

mg/off-kg (lb/million off-lbs) of hard alloy aluminum extruded

Chromium 0.11 0.05

Cyanide 0.06 0.03

Zinc 0.31 0.13

TTO 0.21

Oil and grease (alternate monitoring parameter) 2.98 2.98

Subpart C

Direct Chill Casting Contact Cooling Water

Pollutant or pollutant property PSNS

Maximum for any 1 day Maximum for monthly average

mg/off-kg (lb/million off-lbs) of aluminum cast

Chromium 0.49 0.20

Cyanide 0.27 0.11

Zinc 1.36 0.56

TTO 0.92

Oil and grease (alternate monitoring parameter) 13.29 13.29

Subpart C

Press Heat Treatment Contact Cooling Water

Pollutant or pollutant property PSNS

Maximum for any 1 day Maximum for monthly average

mg/off-kg (lb/million off-lbs) of aluminum quenched

Chromium 0.76 0.31

Cyanide 0.41 0.17

Zinc 2.08 0.86

TTO 1.41

Oil and grease (alternate monitoring parameter) 20.37 20.37

Subpart C

Solution Heat Treatment Contact Cooling Water

Pollutant or pollutant property PSNS

Maximum for any 1 day Maximum for monthly average

mg/off-kg (lb/million-off-lbs) of aluminum quenched

Chromium 0.76 0.31

Cyanide 0.41 0.17

Zinc 2.08 0.86

TTO 1.41

Oil and grease (alternate monitoring parameter) 20.37 20.37

Subpart C

Cleaning or Etching Bath

Pollutant or pollutant property PSNS

Maximum for any 1 day Maximum for monthly average

mg/off-kg (lb/million-off-lbs) of aluminum cleaned or etched

Chromium 0.067 0.027

Cyanide 0.036 0.015

Zinc 0.183 0.075

TTO 0.124

Oil and grease (alternate monitoring parameter) 1.79 1.79

Subpart C

Cleaning or Etching Rinse

Pollutant or pollutant property PSNS

Maximum for any 1 day Maximum for monthly average

mg/off-kg (lb/million-off-lbs) of aluminum cleaned or etched

Chromium 0.52 0.21

Cyanide 0.28 0.11

Zinc 1.42 0.59

TTO 0.96

Oil and grease (alternate monitoring parameter) 13.91 13.91

Subpart C

Cleaning or Etching Scrubber Liquor

Pollutant or pollutant property PSNS

Maximum for any 1 day Maximum for monthly average

mg/off-kg (lb/million-off-lbs) of aluminum cleaned or etched

Chromium 0.72 0.29

Cyanide 0.39 0.16

Zinc 1.97 0.81

TTO 1.34

Oil and grease (alternate monitoring parameter) 19.33 19.33

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection