GroundRules
40 CFR 469.26: Pretreatment standards for existing sources (PSES).
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS
- PART 469—ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY
- Subpart B—Electronic Crystals Subcategory
(a) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources (PSES):
Subpart B—Electronic Crystals PSES Effluent Limitations
Pollutant or pollutant property Maximum for any 1 day Average of daily values for 30 consecutive days
Milligrams per liter (mg/l)
TTO 1 1.37 (2)
Arsenic (T) 3 2.09 0.83
1 Total toxic organics.
2 Not applicable.
3 The arsenic (T) limitation only applies to manufacturers of gallium or indium arsenide crystals.
(b) An existing source submitting a certification in lieu of monitoring pursuant to § 469.13 (c) and (d) of this regulation must implement the solvent management plan approved by the control authority.
Collected 2026-08-27T02:26:04Z. Source file · JSON