GroundRules
40 CFR 59.506: How do I demonstrate compliance if I manufacture multi-component kits?
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER C—AIR PROGRAMS
- PART 59—NATIONAL VOLATILE ORGANIC COMPOUND EMISSION STANDARDS FOR CONSUMER AND COMMERCIAL PRODUCTS
- Subpart E—National Volatile Organic Compound Emission Standards for Aerosol Coatings
(a) If you manufacture multi-component kits as defined in § 59.503, then the Kit PWR must not exceed the Total Reactivity Limit.
(b) You must calculate the Kit PWR and the Total Reactivity Limit as follows:
(1) KIT PWR = (PWR(1) × W1) + (PWR(2) × W2) + . ... + (PWR(n) × Wn)
(2) Total Reactivity Limit = (RL1 × W1) + (RL2 × W2) + ... + (RLn × Wn).
(3) Kit PWR ≤Total Reactivity Limit.
Where:
W = the weight of the product contents (excluding container).
RL = the PWR Limit specified in Table 1 of this subpart.
Subscript 1 denotes the first component product in the kit.
Subscript 2 denotes the second component product in the kit.
Subscript n denotes any additional component product.
Collected 2026-08-27T02:26:04Z. Source file · JSON