GroundRules
40 CFR 63.5985: What are my alternatives for meeting the emission limits for tire production affected sources?
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER C—AIR PROGRAMS
- PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
- Subpart XXXX—National Emissions Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing
You must use one of the compliance alternatives in paragraphs (a) through (c) of this section to meet either of the emission limits in § 63.5984.
(a) Purchase alternative. Use only cements and solvents that, as purchased, contain no more HAP than allowed by the emission limits in table 1 to this subpart, option 1 (HAP constituent option).
(b) Monthly average alternative, without using an add-on control device. Use cements and solvents in such a way that the monthly average HAP emissions do not exceed the emission limits in table 1 to this subpart, option 1 or option 2.
(c) Monthly average alternative, using an add-on control device. Use a control device to reduce HAP emissions so that the monthly average HAP emissions do not exceed the emission limits in table 1 to this subpart, option 1 or option 2.
Collected 2026-08-27T02:26:04Z. Source file · JSON