GroundRules
← Search the law
Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR Figure E-1 to Subpart E of Part 53: Figure E-1 to Subpart E of Part 53—Designation Testing Checklist

Read at publisher ↗
Where this section sits in the code
  1. Title 40—Protection of Environment
  2. CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
  3. SUBCHAPTER C—AIR PROGRAMS
  4. PART 53—AMBIENT AIR MONITORING REFERENCE AND EQUIVALENT METHODS
  5. Subpart E—Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent Methods for PM 2.5 or PM 10-2.5

DESIGNATION TESTING CHECKLIST

__________ __________ __________

Auditee Auditor signature Date

Compliance Status: Y = Yes N = No NA = Not applicable/Not available Verification Comments (Includes documentation of who, what, where, when, why) (Doc. #, Rev. #, Rev. Date)

Verification Verified by Direct Observation of Process or of Documented Evidence: Performance, Design or Application Spec. Corresponding to Sections of 40 CFR Part 53 or 40 CFR Part 50, Appendix L

Y N NA

Performance Specification Tests

Sample flow rate coefficient of variation (§ 53.53) (L-7.4.3)

Filter temperature control (sampling) (§ 53.57) (L-7.4.10)

Elapsed sample time accuracy (§ 53.54) (L-7.4.13)

Filter temperature control (post sampling) (§ 53.57) (L-7.4.10)

Application Specification Tests

Field Precision (§ 53.58) (L-5.1)

Meets all Appendix L requirements (part 53, subpart A, § 53.2(a)(3)) (part 53, subpart E, § 53.51(a),(d))

Filter Weighing (L-8)

Field Sampling Procedure (§ 53.30, .31, .34)

Design Specification Tests

Filter (L-6)

Range of Operational Conditions (L-7.4.7)

The Following Requirements Apply Only to Class I Candidate Equivalent Methods

Aerosol Transport (§ 53.59)

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection