Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR Figure F-1 to Subpart F of Part 53: Figure F-1 to Subpart F of Part 53—Designation Testing Checklist

DESIGNATION TESTING CHECKLIST FOR CLASS II
__________ __________ __________
Auditee Auditor signature Date
Compliance Status: Y = Yes N = No NA = Not applicable/Not available Verification Comments (Includes documentation of who, what, where, when, why) (Doc. #, Rev. #, Rev. Date)
Verification Verified by Direct Observation of Process or of Documented Evidence: Performance, Design or Application Spec. Corresponding to Sections of 40 CFR Part 53, Subparts E and F
Y N NA
Subpart E: Performance Specification Tests
Evaluation completed according to Subpart E § 53.50 to § 53.56
Subpart E: Class I Sequential Tests
Class II samplers that are also Class I (sequentialized) have passed the tests in § 53.57
Subpart F: Performance Spec/Test
Evaluation of Physical Characteristics of Clean Sampler - One of these tests must be performed: § 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static Fractionator
Evaluation of Physical Characteristics of Loaded Sampler § 53.65 Loading Test One of the following tests must be performed for evaluation after loading: § 53.62, § 53.63, § 53.64
Evaluation of the Volatile Characteristics of the Class II Sampler § 53.66

Where this section sits in the code

Title 40—Protection of Environment
CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER C—AIR PROGRAMS
PART 53—AMBIENT AIR MONITORING REFERENCE AND EQUIVALENT METHODS
Subpart F—Procedures for Testing Performance Characteristics of Class II Equivalent Methods for PM 2.5

DESIGNATION TESTING CHECKLIST FOR CLASS II

__________ __________ __________

Auditee Auditor signature Date

Compliance Status: Y = Yes N = No NA = Not applicable/Not available Verification Comments (Includes documentation of who, what, where, when, why) (Doc. #, Rev. #, Rev. Date)

Verification Verified by Direct Observation of Process or of Documented Evidence: Performance, Design or Application Spec. Corresponding to Sections of 40 CFR Part 53, Subparts E and F

Y N NA

Subpart E: Performance Specification Tests

Evaluation completed according to Subpart E § 53.50 to § 53.56

Subpart E: Class I Sequential Tests

Class II samplers that are also Class I (sequentialized) have passed the tests in § 53.57

Subpart F: Performance Spec/Test

Evaluation of Physical Characteristics of Clean Sampler - One of these tests must be performed: § 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static Fractionator

Evaluation of Physical Characteristics of Loaded Sampler § 53.65 Loading Test One of the following tests must be performed for evaluation after loading: § 53.62, § 53.63, § 53.64

Evaluation of the Volatile Characteristics of the Class II Sampler § 53.66

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection