Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR Table 1 to Subpart III of Part 62: Table 1 to Subpart III of Part 62—Emission Limitations

For the air pollutant You must meet this emission limitation a Using this averaging time And determining compliance using this method
Cadmium 0.004 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60).
Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 10, 10A, or 10B, of appendix A of part 60).
Dioxins/furans (toxic equivalency basis) 0.41 nanograms per dry standard cubic meter 3-run average (4 hour minimum sample time per run) Performance test (Method 23 of appendix A of part 60).
Hydrogen chloride 62 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 26A of appendix A of part 60).
Lead 0.04 milligrams per dry standard cubic meter 3-run (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60).
Mercury 0.47 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60).
Opacity 10 percent 6-minute averages Performance test (Method 9 of appendix A of part 60).
Oxides of nitrogen 388 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Methods 7, 7A, 7C, 7D, or 7E of appendix A of part 60).
Particulate matter 70 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 5 or 29 of appendix A of part 60).
Sulfur dioxide 20 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 6 or 6c of appendix A of part 60).
a All emission limitations (except for opacity) are measured at 7 percent oxygen, dry basis at standard conditions.

Where this section sits in the code

Title 40—Protection of Environment
CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER C—AIR PROGRAMS
PART 62—APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS
Subpart III—Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999

For the air pollutant You must meet this emission limitation a Using this averaging time And determining compliance using this method

Cadmium 0.004 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60).

Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 10, 10A, or 10B, of appendix A of part 60).

Dioxins/furans (toxic equivalency basis) 0.41 nanograms per dry standard cubic meter 3-run average (4 hour minimum sample time per run) Performance test (Method 23 of appendix A of part 60).

Hydrogen chloride 62 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 26A of appendix A of part 60).

Lead 0.04 milligrams per dry standard cubic meter 3-run (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60).

Mercury 0.47 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60).

Opacity 10 percent 6-minute averages Performance test (Method 9 of appendix A of part 60).

Oxides of nitrogen 388 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Methods 7, 7A, 7C, 7D, or 7E of appendix A of part 60).

Particulate matter 70 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 5 or 29 of appendix A of part 60).

Sulfur dioxide 20 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 6 or 6c of appendix A of part 60).

a All emission limitations (except for opacity) are measured at 7 percent oxygen, dry basis at standard conditions.

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection