40 CFR Table 1 to Subpart TTTTa of Part 60: Table 1 to Subpart TTTTa of Part 60—CO2 Emission Standards for Affected Stationary Combustion Turbines That Commenced Construction or Reconstruction After May 23, 2023 (Gross or Net Energy Output-Based Standards Applicable as Approved by the Administrator)
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER C—AIR PROGRAMS
- PART 60—STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES
- Subpart TTTTa—Standards of Performance for Greenhouse Gas Emissions for Modified Coal-Fired Steam Electric Generating Units and New Construction and Reconstruction Stationary Combustion Turbine Electric Generating Units
[Note: Numerical values of 1,000 or greater have a minimum of 3 significant figures and numerical values of less than 1,000 have a minimum of 2 significant figures]
Affected EGU category CO2 emission standard
Base load combustion turbines For 12-operating month averages beginning before January 2032, 360 to 560 kg CO2/MWh (800 to 1,250 lb CO2/MWh) of gross energy output; or 370 to 570 kg CO2/MWh (820 to 1,280 lb CO2/MWh) of net energy output as determined by the procedures in § 60.5525a.
For 12-operating month averages beginning after December 2031, 43 to 67 kg CO2/MWh (100 to 150 lb CO2/MWh) of gross energy output; or 42 to 64 kg CO2/MWh (97 to 139 lb CO2/MWh) of net energy output as determined by the procedures in § 60.5525a.
Intermediate load combustion turbines 530 to 710 kg CO2/MWh (1,170 to 1,560 lb CO2/MWh) of gross energy output; or 540 to 700 kg CO2/MWh (1,190 to 1,590 lb CO2/MWh) of net energy output as determined by the procedures in § 60.5525a.
Low load combustion turbines Between 50 to 69 kg CO2/GJ (120 to 160 lb CO2/MMBtu) of heat input as determined by the procedures in § 60.5525a.
Collected 2026-08-27T02:26:04Z. Source file · JSON