GroundRules
40 CFR Table 1 to Subpart XXXX of Part 63: Table 1 to Subpart XXXX of Part 63—Emission Limits for Tire Production Affected Sources
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER C—AIR PROGRAMS
- PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
- Subpart XXXX—National Emissions Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing
As stated in § 63.5984, you must comply with the emission limits for each new, reconstructed, or existing tire production affected source in the following table:
For each . . . You must meet the following emission limits
1. Option 1—HAP constituent option a. Emissions of each HAP in table 16 to this subpart must not exceed 1,000 grams HAP per megagram (2 pounds per ton) of total cements and solvents used at the tire production affected source, and b. Emissions of each HAP not in table 16 to this subpart must not exceed 10,000 grams HAP per megagram (20 pounds per ton) of total cements and solvents used at the tire production affected source.
2. Option 2—production-based option Emissions of HAP must not exceed 0.024 grams per megagram (0.00005 pounds per ton) of rubber used at the tire production affected source.
Collected 2026-08-27T02:26:04Z. Source file · JSON