40 CFR Table 19 to Subpart G of Part 63: Table 19 to Subpart G of Part 63—Wastewater—Information on Residuals To Be Submitted With Notification of Compliance Status a b
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER C—AIR PROGRAMS
- PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
- Subpart G—National Emission Standards for Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry for Process Vents, Storage Vessels, Transfer Operations, and Wastewater
Residual identification c Residual description d Wastewater stream identification e Treatment process f Fate g Control device identification code Control device description h Control device efficiency i
a The information specified in this table must be submitted; however, it may be submitted in any format. This table presents an example format.
b Other requirements for the Notification of Compliance Status are specified in § 63.152(b) of this subpart.
c Name or identification code of residual removed from Group 1 wastewater stream.
d Description of residual (e.g., steam stripper A-13 overhead condensates).
e Identification of stream from which residual is removed.
f Treatment process from which residual originates.
g Indicate whether residual is sold, returned to production process, or returned to waste management unit or treatment process; or whether HAP mass of residual is destroyed by 99 percent.
h If the fate of the residual is such that the HAP mass is destroyed by 99 percent, give description of device used for HAP destruction.
i If the fate of the residual is such that the HAP mass is destroyed by 99 percent, provide an estimate of control device efficiency and attach substantiation in accordance with § 63.146(b)(9) of this subpart.
Collected 2026-08-27T02:26:04Z. Source file · JSON