GroundRules
40 CFR Table 2 to Subpart VVVV of Part 63: Table 2 to Subpart VVVV of Part 63—Alternative Organic HAP Content Requirements for Open Molding Resin and Gel Coat Operations
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER C—AIR PROGRAMS
- PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
- Subpart VVVV—National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing
As specified in §§ 63.5701(b), 63.5704(b)(2), and 63.5713(a), (b), and (d), you must comply with the requirements in the following table:
For this operation— And this application method— You must not exceed this weighted-average organic HAP content (weight percent) requirement—
1. Production resin operations Atomized (spray) 28 percent.
2. Production resin operations Nonatomized (nonspray) 35 percent.
3. Pigmented gel coat operations Any method 33 percent.
4. Clear gel coat operations Any method 48 percent
5. Tooling resin operations Atomized (spray) 30 percent.
6. Tooling resin operations Nonatomized (nonspray) 39 percent.
7. Tooling gel coat operations Any method 40 percent.
Collected 2026-08-27T02:26:04Z. Source file · JSON