GroundRules
46 CFR 154.440: Allowable stress.
Where this section sits in the code
- Title 46—Shipping
- CHAPTER I—COAST GUARD, DEPARTMENT OF HOMELAND SECURITY
- SUBCHAPTER O—CERTAIN BULK DANGEROUS CARGOES
- PART 154—SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES
- Subpart C—Design, Construction and Equipment
(a) The allowable stresses for an independent tank type A must:
(1) For tank web frames, stringers, or girders of carbon manganese steel or aluminum alloys, meet σB/2.66 or σY/1.33, whichever is less; and
(2) For other materials, be specially approved by the Commandant (CG-ENG).
(b) A greater allowable stress than required in paragraph (a)(1) of this section may be specially approved by the Commandant (CG-ENG) if the equivalent stress (σc) is calculated from the formula in appendix A of this part.
(c) Tank plating must meet the American Bureau of Shipping's deep tank standards, for an internal pressure head that meets § 154.439(a), published in “Rules for Building and Classing Steel Vessels”, 1981.
Collected 2026-08-27T02:26:22Z. Source file · JSON