46 CFR 52.01-2: -2 Adoption of Section I of the ASME BPVC.

(a) Main power boilers and auxiliary boilers must be designed, constructed, inspected, tested, and stamped in accordance with Section I of the ASME BPVC (incorporated by reference; see § 52.01-1), as limited, modified, or replaced by specific requirements in this part. The appendices to Section I of the ASME BPVC are adopted and must be followed when the requirements in Section I make them mandatory. For general information, table 1 to § 52.01-2(a) lists the various paragraphs in Section I of the ASME BPVC that are limited, modified, or replaced by regulations in this part.

Table 1 to § 52.01-2(a)—Limitations and Modifications in the Adoption of Section I of the ASME BPVC

Paragraphs in section I, ASME BPVC and disposition Unit of this part

PG-1 replaced by 54.01-5(a).

PG-16 through PG-31 modified by 52.01-95.

PG-32 through PG-39 modified by 52.01-100.

PG-42 through PG-55 modified by 52.01-100.

PG-58 and PG-59 modified by 52.01-105.

PG-60 modified by 52.01-110.

PG-61 modified by 52.01-115 (56.50-30).

PG-67 through PG-73 modified by 52.01-120.

PG-90 through PG-100 modified by 52.01-135 (52.01-95).

PG-91 modified by 52.01-135(b).

PG-99 modified by 52.01-135(c).

PG-100 modified by 52.01-95(e).

PG-104 through PG-113 modified by 52.01-140(a).

PG-112 and PG-113 modified by 52.01-145.

PW-1 through PW-54 modified by 52.05-1.

PW-10 modified by 52.05-15.

PW-11.1 modified by 52.05-20.

PW-16 modified by 52.05-30.

PW-41 modified by 52.05-20, 52.05-45.

PWT-1 through PWT-15 modified by 52.15-1.

PWT-9 modified by 52.15-5.

PWT-9.2 replaced by 52.15-5(b)

PWT-11 modified by 52.15-5.

PWT-11.3 replaced by 52.15-5(b).

PFT-1 through PFT-49 modified by 52.20-1.

PFT-44 modified by 52.20-17.

PFT-46. modified by 52.20-25.

PFH-1 modified by 52.25-3.

PMB-1 through PMB-21 modified by 52.25-5.

PEB-1 through PEB-19 modified by 52.25-7.

PVG-1 through PVG-12 modified by 52.25-10.

A-19 through A-21 modified by 52.01-50.

Note 1 to table 1 to § 52.01-2(a): The references to specific provisions in the ASME BPVC are coded. The first letter “P” refers to section I, while the letter “A” refers to the appendix to section I. The letter or letters following “P” refer to a specific subsection of section I. The number following the letter or letters refers to the paragraph so numbered in the text.

(b) References to the ASME BPVC, such as paragraph PG-1, indicate:

(1) P=Section I, Power Boilers.

(2) G=Subsection—General Requirements.

(3) 1=Paragraph 1.

(c) When a section or paragraph of the regulations in this part relates to Section I of the ASME BPVC, the relationship with the code will be shown immediately following the heading of the section or at the beginning of the paragraph as follows:

(1) (Modifies P __.) This indicates that the material in P __ is generally applicable but is being altered, amplified, or augmented.

(2) (Replaces P __.) This indicates that P __ does not apply.

(3) (Reproduces P __.) This indicates that P __ is being identically reproduced for convenience, not for emphasis.