GroundRules
49 CFR 178.33a-6: a-6 Manufacture.
Where this section sits in the code
- Title 49—Transportation
- Subtitle B—Other Regulations Relating to Transportation
- CHAPTER I—PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
- SUBCHAPTER C—HAZARDOUS MATERIALS REGULATIONS
- PART 178—SPECIFICATIONS FOR PACKAGINGS
- Subpart B—Specifications for Inside Containers, and Linings
(a) By appliances and methods that will assure uniformity of completed containers; dirt and scale to be removed as necessary; no defect acceptable that is likely to weaken the finished container appreciably; reasonably smooth and uniform surface finish required.
(b) Seams when used must be as follows:
(1) Circumferential seams. By welding, swedging, brazing, soldering, or double seaming.
(2) Side seams. By welding, brazing or soldering.
(c) Ends. The ends shall be of pressure design.
Collected 2026-08-27T02:26:34Z. Source file · JSON