GroundRules
49 CFR 178.920: Standards for metal Large Packagings.
Where this section sits in the code
- Title 49—Transportation
- Subtitle B—Other Regulations Relating to Transportation
- CHAPTER I—PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
- SUBCHAPTER C—HAZARDOUS MATERIALS REGULATIONS
- PART 178—SPECIFICATIONS FOR PACKAGINGS
- Subpart P—Large Packagings Standards
(a) The provisions in this section apply to metal Large Packagings intended to contain liquids and solids. Metal Large Packaging types are designated:
(1) 50A steel
(2) 50B aluminum
(3) 50N metal (other than steel or aluminum)
(b) Each Large Packaging must be made of suitable ductile metal materials. Welds must be made so as to maintain design type integrity of the receptacle under conditions normally incident to transportation. Low-temperature performance must be taken into account when appropriate.
(c) The use of dissimilar metals must not result in deterioration that could affect the integrity of the Large Packaging.
(d) Metal Large Packagings may not have a volumetric capacity greater than 3,000 L (793 gallons) and not less than 450 L (119 gallons).
Collected 2026-08-27T02:26:34Z. Source file · JSON