Browse Federal regulations
Read the original sections, or search by topic.
- 40 CFR 60.2984 · Is there an approval process for my State plan?
- 40 CFR 60.2985 · What if my state plan is not approvable?
- 40 CFR 60.2986 · Is there an approval process for a negative declaration letter?
- 40 CFR 60.2987 · What compliance schedule must I include in my state plan?
- 40 CFR 60.2988 · Are there any state plan requirements for this subpart that apply instead of the requirements specified in subpart B of this part?
- 40 CFR 60.2989 · Does this subpart directly affect incineration unit owners and operators in my state?
- 40 CFR 60.2990 · What Authorities are withheld by EPA?
- 40 CFR 60.2991 · What incineration units must I address in my state plan?
- 40 CFR 60.2992 · What is an existing incineration unit?
- 40 CFR 60.2993 · Are any combustion units excluded from my state plan?
- 40 CFR 60.2994 · Are air curtain incinerators regulated under this subpart?
- 40 CFR 60.2996 · What is the purpose of the “model rule” in this subpart?
- 40 CFR 60.2997 · How does the model rule relate to the required elements of my State plan?
- 40 CFR 60.2998 · What are the principal components of the model rule?
- 40 CFR 60.3000 · When must I comply?
- 40 CFR 60.3001 · What must I do if I close my OSWI unit and then restart it?
- 40 CFR 60.3002 · What must I do if I plan to permanently close my OSWI unit and not restart it?
- 40 CFR 60.3003 · What else must I do prior to the compliance date if I meet the substitute means of compliance demonstration?
- 40 CFR 60.3010 · What is a waste management plan?
- 40 CFR 60.3011 · When must I submit my waste management plan?
- 40 CFR 60.3012 · What should I include in my waste management plan?
- 40 CFR 60.3014 · What are the operator training and qualification requirements?
- 40 CFR 60.3015 · When must the operator training course be completed?
- 40 CFR 60.3016 · How do I obtain my operator qualification?
- 40 CFR 60.3017 · How do I maintain my operator qualification?
- 40 CFR 60.3018 · How do I renew my lapsed operator qualification?
- 40 CFR 60.3019 · What site-specific documentation is required?
- 40 CFR 60.3020 · What if all the qualified operators are temporarily not accessible?
- 40 CFR 60.3022 · What emission limitations must I meet and by when?
- 40 CFR 60.3023 · What operating limits must I meet and by when?
- 40 CFR 60.3024 · What if I do not use a wet scrubber, dry scrubber, electrostatic precipitator, or fabric filter to comply with the emission limitations?
- 40 CFR 60.3025 · [Reserved]
- 40 CFR 60.3027 · How do I conduct the initial and annual performance test?
- 40 CFR 60.3028 · How are the performance test data used?
- 40 CFR 60.3030 · How do I demonstrate initial compliance with the emission limitations and establish the operating limits?
- 40 CFR 60.3031 · By what date must I conduct the initial performance test?
- 40 CFR 60.3032 · What are the substitute means of compliance demonstration requirements for very small municipal waste combustion units and institutional waste incineration units with capacities less than or equal to 10 tons per day?
- 40 CFR 60.3033 · How do I demonstrate continuous compliance with the emission limitations and the operating limits?
- 40 CFR 60.3034 · By what date must I conduct the annual performance test?
- 40 CFR 60.3035 · May I conduct performance testing less often?
- 40 CFR 60.3036 · May I conduct a repeat performance test to establish new operating limits?
- 40 CFR 60.3038 · What continuous emission monitoring systems must I install?
- 40 CFR 60.3039 · How do I make sure my continuous emission monitoring systems are operating correctly?
- 40 CFR 60.3040 · What is my schedule for evaluating continuous emission monitoring systems?
- 40 CFR 60.3041 · What is the minimum amount of monitoring data I must collect with my continuous emission monitoring systems?
- 40 CFR 60.3042 · How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?
- 40 CFR 60.3043 · What operating parameter monitoring equipment must I install, or what operating parameters must I monitor?
- 40 CFR 60.3044 · Is there a minimum amount of operating parameter monitoring data I must obtain?
- 40 CFR 60.3046 · What records must I keep?
- 40 CFR 60.3047 · Where and in what format must I keep my records?
- 40 CFR 60.3048 · What reports must I submit?
- 40 CFR 60.3049 · What information must I submit following my initial performance test?
- 40 CFR 60.3050 · When must I submit my annual report?
- 40 CFR 60.3051 · What information must I include in my annual report?
- 40 CFR 60.3052 · What other reports must I submit if I have a deviation?
- 40 CFR 60.3053 · What must I include in the deviation report?
- 40 CFR 60.3054 · What else must I report if I have a deviation from the requirement to have a qualified operator accessible?
- 40 CFR 60.3055 · Are there any other notifications or reports that I must submit?
- 40 CFR 60.3056 · In what form can I submit my reports?
- 40 CFR 60.3057 · Can reporting dates be changed?
- 40 CFR 60.3059 · Am I required to apply for and obtain a title V operating permit for my unit?
- 40 CFR 60.3060 · When must I submit a title V permit application for my existing unit?
- 40 CFR 60.3061 · What are the requirements for temporary-use incinerators and air curtain incinerators used in disaster recovery?
- 40 CFR 60.3062 · What is an air curtain incinerator?
- 40 CFR 60.3063 · When must I comply if my air curtain incinerator burns only wood waste, clean lumber, and yard waste?
- 40 CFR 60.3064 · What must I do if I close my air curtain incinerator that burns only wood waste, clean lumber, and yard waste and then restart it?
- 40 CFR 60.3065 · What must I do if I plan to permanently close my air curtain incinerator that burns only wood waste, clean lumber, and yard waste and not restart it?
- 40 CFR 60.3066 · What are the emission limitations for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?
- 40 CFR 60.3067 · How must I monitor opacity for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?
- 40 CFR 60.3068 · What are the recordkeeping and reporting requirements for air curtain incinerators that burn only wood waste, clean lumber, and yard waste?
- 40 CFR 60.3069 · [Reserved]
- 40 CFR 60.3076 · What equations must I use?
- 40 CFR 60.3078 · What definitions must I know?
- 40 CFR Table 1 to Subpart FFFF of Part 60 · Table 1 to Subpart FFFF of Part 60—Model Rule—Compliance Schedule
- 40 CFR Table 2 to Subpart FFFF of Part 60 · Table 2 to Subpart FFFF of Part 60—Model Rule—Emission Limitations for That Apply to OSWI Units With Capacities Greater Than 10 Tons per Day
- 40 CFR Table 2a to Subpart FFFF of Part 60 · Table 2a to Subpart FFFF of Part 60—Model Rule—Emission Limitations That Apply to OSWI Units With Capacities Less Than or Equal to 10 Tons per Day On or After [Date To Be Specified in State Plan] a
- 40 CFR Table 3 to Subpart FFFF of Part 60 · Table 3 to Subpart FFFF of Part 60—Model Rule—Operating Limits for Incinerators
- 40 CFR Table 4 to Subpart FFFF of Part 60 · Table 4 to Subpart FFFF of Part 60—Model Rule—Requirements for Continuous Emission Monitoring Systems (CEMS)
- 40 CFR Table 5 to Subpart FFFF of Part 60 · Table 5 to Subpart FFFF of Part 60—Model Rule—Summary of Reporting Requirements
- 40 CFR 60.4200 · Am I subject to this subpart?
- 40 CFR 60.4201 · What emission standards must I meet for non-emergency engines if I am a stationary CI internal combustion engine manufacturer?
- 40 CFR 60.4202 · What emission standards must I meet for emergency engines if I am a stationary CI internal combustion engine manufacturer?
- 40 CFR 60.4203 · How long must my engines meet the emission standards if I am a manufacturer of stationary CI internal combustion engines?
- 40 CFR 60.4204 · What emission standards must I meet for non-emergency engines if I am an owner or operator of a stationary CI internal combustion engine?
- 40 CFR 60.4205 · What emission standards must I meet for emergency engines if I am an owner or operator of a stationary CI internal combustion engine?
- 40 CFR 60.4206 · How long must I meet the emission standards if I am an owner or operator of a stationary CI internal combustion engine?
- 40 CFR 60.4207 · What fuel requirements must I meet if I am an owner or operator of a stationary CI internal combustion engine subject to this subpart?
- 40 CFR 60.4208 · What is the deadline for importing or installing stationary CI ICE produced in previous model years?
- 40 CFR 60.4209 · What are the monitoring requirements if I am an owner or operator of a stationary CI internal combustion engine?
- 40 CFR 60.4210 · What are my compliance requirements if I am a stationary CI internal combustion engine manufacturer?
- 40 CFR 60.4211 · What are my compliance requirements if I am an owner or operator of a stationary CI internal combustion engine?
- 40 CFR 60.4212 · What test methods and other procedures must I use if I am an owner or operator of a stationary CI internal combustion engine with a displacement of less than 30 liters per cylinder?
- 40 CFR 60.4213 · What test methods and other procedures must I use if I am an owner or operator of a stationary CI internal combustion engine with a displacement of greater than or equal to 30 liters per cylinder?
- 40 CFR 60.4214 · What are my notification, reporting, and recordkeeping requirements if I am an owner or operator of a stationary CI internal combustion engine?
- 40 CFR 60.4215 · What requirements must I meet for engines used in Guam, American Samoa, or the Commonwealth of the Northern Mariana Islands?
- 40 CFR 60.4216 · What requirements must I meet for engines used in Alaska?
- 40 CFR 60.4217 · What emission standards must I meet if I am an owner or operator of a stationary internal combustion engine using special fuels?
- 40 CFR 60.4218 · What General Provisions and confidential information provisions apply to me?
- 40 CFR 60.4219 · What definitions apply to this subpart?
- 40 CFR Table 1 to Subpart IIII of Part 60 · Table 1 to Subpart IIII of Part 60—Emission Standards for Stationary Pre-2007 Model Year Engines With a Displacement of <10 Liters per Cylinder and 2007-2010 Model Year Engines >2,237 KW (3,000 HP) and With a Displacement of <10 Liters per Cylinder