GroundRules
← Search the law
Arkansas · Snapshot open-us-law v2026.08, retrieved 2026-09-17

Ark. Code Ann. § 20-27-903: Labeling required

Read at publisher ↗
Where this section sits in the code
  1. AR Code
  2. Title 20
  3. Chapter 27
  4. Subchapter 9

(a) (1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material. (2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972. (3) The label shall be legible and visible after installation. (b) Safety glazing labeling shall not be used on other than safety glazing materials. Acts 1973, No. 117, § 2; A.S.A. 1947, § 82-733.

(a) (1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material. (2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972. (3) The label shall be legible and visible after installation.

(1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material.

(2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972.

(3) The label shall be legible and visible after installation.

(b) Safety glazing labeling shall not be used on other than safety glazing materials.

Collected 2026-09-17T21:35:43Z. Source file · JSON

Compilation CC BY 4.0, Open US Law (Vaquill AI). GroundRules uses only the releases published under CC BY 4.0: from v2026.09 the compilation is licensed CC BY-NC 4.0, and GroundRules does not use those releases. Each affected row names its release in its vintage label. GroundRules parsed and filtered the compilation to retain enacted text. Source · License

Arkansas electronic product files were republished by Public.Resource.Org under a public-domain mark. GroundRules uses enacted text from Release 78 only as a labeled supplement to the newer Open US Law rows. Source

Browse this collection