Okla. Stat. tit. 2, § 2-14-65: Service technicians and service agencies - Powers, duties

and responsibilities.

Licensed service technicians and service agencies shall:

1. Submit a placing in service report to the State Board of

Agriculture within five (5) calendar days after service is provided

when required by the Board;

2. Have the authority to remove an official rejection tag after

the device has been repaired, tested, and found to meet

requirements. The rejection tag and the service technician/service

agency test report shall accompany the placing-in-service report

submitted to the Board;

3. Attach a seal approved by the Board identifying the service

agency, signed and dated by the service technician, stating that the

commercial device has been tested in accordance with the provisions

in Handbook 44 and is suitable for use as a commercial device;

4. Have available and use sufficient standards and equipment to

adequately test weights and measures as set forth in the notes

section of each applicable code in Handbook 44, “Specifications,

Tolerances and Other Technical Requirements for Weighing and

Measuring Devices”, and have the handbook in their possession. The

equipment shall meet the specifications corresponding to the series

of NIST Handbook 105, “Specifications and Tolerances for Reference

Standards and Field Standard Weights and Measures”, supplements and

revisions;

5. Submit to the Board, as required by the Board of Control of

the State Bureau of Standards, for examination and certification,

any standards and testing equipment that are used or are to be used

in the performance of the service and testing functions. A licensed

service technician or service agency shall not use any weight or

measure standard or testing equipment that has not been approved by

the Board; and

6. Maintain all records required by the Board.