12VAC5-421-1860: Rinsing procedures

Washed utensils and equipment shall be rinsed so that abrasives are removed and cleaning chemicals are removed or diluted through the use of water or a detergent-sanitizer solution by using one of the following procedures:

1. Use of a distinct, separate water rinse after washing and before sanitizing if using:

a. A 3-compartment sink,

b. Alternative manual warewashing equipment equivalent to a 3-compartment sink as specified in 12VAC5-421-1460 C, or

c. A 3-step washing, rinsing, and sanitizing procedure in a warewashing system for CIP equipment;

2. Use of a detergent-sanitizer as specified under 12VAC5-421-1710 if using:

a. Alternative warewashing equipment as specified in 12VAC5-421-1460 C that is approved for use with a detergent-sanitizer, or

b. A warewashing system for CIP equipment;

3. Use of a nondistinct water rinse that is integrated in the hot water sanitization immersion step of a 2-compartment sink operation;

4. If using a warewashing machine that does not recycle the sanitizing solution as specified under subdivision 5 of this section, or alternative manual warewashing equipment such as sprayers, use of a nondistinct water rinse that is:

a. Integrated in the application of the sanitizing solution, and

b. Wasted immediately after each application; or

5. If using a warewashing machine that recycles the sanitizing solution for use in the next wash cycle, use of a nondistinct water rinse that is integrated in the application of the sanitizing solution.