24 CFR 3285.405: Severe wind zones.
Where this section sits in the code
- Title 24—Housing and Urban Development
- Subtitle B—Regulations Relating to Housing and Urban Development
- CHAPTER XX—OFFICE OF ASSISTANT SECRETARY FOR HOUSING—FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT
- PART 3285—MODEL MANUFACTURED HOME INSTALLATION STANDARDS
- Subpart E—Anchorage Against Wind
When any part of a home is installed within 1,500 feet of a coastline in Wind Zones II or III, the manufactured home must be designed for the increased requirements, as specified on the home's data plate (refer to § 3280.5(f) of this chapter) in accordance with acceptable engineering practice. Where site or other conditions prohibit the use of the manufacturer's instructions, a registered professional engineer or registered architect, in accordance with acceptable engineering practice, must design anchorage for the special wind conditions.
Collected 2026-08-27T02:24:55Z. Source file · JSON