40 CFR 180.940: Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions).

Residues of the following chemical substances are exempted from the requirement of a tolerance when used in accordance with good manufacturing practice as ingredients in an antimicrobial pesticide formulation, provided that the substance is applied on a semi-permanent or permanent food-contact surface (other than being applied on food packaging) with adequate draining before contact with food.

(a) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils.

Table 1 to Paragraph (a)

Pesticide Chemical CAS Reg. No. Limits

Acetal 105-57-7 When ready for use, the end-use concentration is not to exceed 100 ppm

acetaldehyde ethyl cis-3-hexenyl acetal 28069-74-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Acetanisole 100-06-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Acetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Acetic acid, octyl ester 112-14-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Acetoin 513-86-0 When ready for use, the end-use concentration is not to exceed 33 ppm

Acetophenone 98-86-2 When ready for use, the end-use concentration is not to exceed 100 ppm

4-acetyl-6-t-butyl-1,1-dimethylindan 13171-00-1 When ready for use, the end-use concentration is not to exceed 33 ppm

Adipic acid 124-04-9 When ready for use, the end-use concentration is not to exceed 100 ppm

alcohols, C16-18, distn. residues 68603-17-8

1190630-03-5

alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C16-18 alcs. manuf 1430895-61-6

alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C20-22 alcs. manuf 1430895-62-7

Alkylbenzene sulfonates (branched and linear) of chain lengths C10-C16, including benzenesulfonic acid, dodecyl and benzenesulfonic acid, dodecyl-, sodium salt 27176-87-0 25155-30-0 When ready for use, the end-use concentration is not to exceed 700 ppm

Alkyl cylcohexylpropionate 2705-87-5 When ready for use, the end-use concentration is not to exceed 100 ppm

α-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 26636-40-8; 27252-75-1; 27306-79-2; 31726-34-8; 32128-65-7; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60636-37-5; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; None

68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 161133-70-6; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2; 2409830-33-5

C10-C18-Alkyl dimethyl amine oxides 1643-20-5, 2571-88-2, 2605-79-0, 3332-27-2, 61788-90-7, 68955-55-5, 70592-80-2, 7128-91-8, 85408-48-6, and 85408-49-7 When ready for use, the end-use concentration is not to exceed 1,350 ppm

Allspice oil (Pimenta officinalis Lindl.) 8006-77-7 When ready for use, the end-use concentration is not to exceed 100 ppm

allyl alpha-ionone 79-78-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Allyl cinnamate 1866-31-5 When ready for use, the end-use concentration is not to exceed 33 ppm

Allyl heptanoate 142-19-8 When ready for use, the end-use concentration is not to exceed 33 ppm

Allyl hexanoate 123-68-2 When ready for use, the end-use concentration is not to exceed 33 ppm

Allyl propionate 2408-20-0 When ready for use, the end-use concentration is not to exceed 33 ppm

Aluminum sulfate 10043-01-3 When ready for use, the end-use concentration is not to exceed 50 ppm

2-propen-1-aminium, N,N-dimethyl-N-propenyl-, chloride, homopolymer 26062-79-3 When ready for use, the end-use concentration is not to exceed 0.6%

Ammonium chloride 12125-02-9 When ready for use, the end-use concentration is not to exceed 48 ppm

Amyl butyrate 540-18-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Amyl formate 638-49-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Amyl hexanoate 540-07-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Amylopectin, acid-hydrolyzed, 1-oxtenylbutanedioate 113894-85-2 None

Amylopectin, hydrogen 1-octadecenylbutanedioate 125109-81-1 None

p-Anisyl acetate 104-21-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Anisyl formate 122-91-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Anisyl propionate 7549-33-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Aspartic acid, N-(1,2-dicarboxyethyl)-, tetrasodium salt 144538-83-0 When ready for use, the end-use concentration is not to exceed 5000 ppm

Balsam oil, Peru (Myroxylon pereirae Klotzsch) 8007-00-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzaldehyde 100-52-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzaldehyde, methyl- 1334-78-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzene, 1,2-dimethoxy- 91-16-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzene, 2-methoxy-4-methyl-1-(1-methylethyl)- 1076-56-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzeneacetaldehyde 122-78-1 When ready for use, the end-use concentration is not to exceed 100 ppm

1,3-Benzodioxole-5-carboxaldehyde 120-57-0 When ready for use, the end-use concentration is not to exceed 33 ppm

Benzoic acid 65-85-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzoin gum, Sumatra 9000-05-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzyl acetate 140-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm

benzyl alcohol 100-51-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzyl benzoate 120-51-4 When ready for use, the end-use concentration is not to exceed 100 ppm

benzyl butyrate 103-37-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzyl cinnamate 103-41-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzyl formate 104-57-4 When ready for use, the end-use concentration is not to exceed 100 ppm

benzyl isobutyrate 103-28-6 When ready for use, the end-use concentration is not to exceed 100 ppm

benzyl propionate 122-63-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzyl salicylate 118-58-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Benzyl trans-2-methyl-2-butenoate 37526-88-8 When ready for use, the end-use concentration is not to exceed 100 ppm

benzaldehyde, 4-methoxy- 123-11-5 When ready for use, the end-use concentration is not to exceed 100 ppm

benzenemethanol, alpha-methyl-, 1-acetate 93-92-5 When ready for use, the end-use concentration is not to exceed 100 ppm

benzoic acid, ethyl ester 93-89-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Bicyclo(2.2.1)heptan-2-ol, 1,3,3-trimethyl- 1632-73-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Bicyclo(2.2.1)heptan-2-ol, 1,7,7-trimethyl-,propanoate, exo- 2756-56-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Bicyclo[2.2.1]heptan-2-one, 1,7,7-trimethyl-, (1R, 4R)- 464-49-3 When ready for use, the end-use concentration is not to exceed 33 ppm

Bicyclo[3.1.1]heptane, 6,6-dimethyl-2-methylene- 127-91-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Bisabolene 495-62-5 When ready for use, the end-use concentration is not to exceed 100 ppm

1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione (CAS Reg. No. 123944-63-8) 0.5% by weight Dye, coloring agent

Bois de rose oil 8015-77-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Borneol 507-70-0 When ready for use, the end-use concentration is not to exceed 100 ppm

endo-Bornyl acetate 76-49-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Butanoic acid, 1,1-dimethyl-2-phenylethyl ester 10094-34-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Butanoic acid, 3-methyl-, 2-methylpropyl ester 589-59-3 When ready for use, the end-use concentration is not to exceed 100 ppm

butanoic acid, 3-oxo-, ethyl ester 141-97-9 When ready for use, the end-use concentration is not to exceed 100 ppm

2-buten-1-one, 1-(2,6,6-trimethyl-1,3-cyclohexadien-1-yl)- 23696-85-7 When ready for use, the end-use concentration is not to exceed 100 ppm

3-buten-2-one, 3-methyl-4-(2,6,6-trimethyl-2-cyclohexen-1-yl)- 127-51-5 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Buten-2-one, 4-(2,6,6-trimethyl-1-cyclohexen-1-yl)- 14901-07-6; 79-77-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Butryic acid 107-92-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Butyl acetate 123-86-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Butyl alcohol 71-36-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Butyl butyrate 109-21-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Butyl butyryllactate 7492-70-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Butyl isovalerate 109-19-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Butyl sulfide 544-40-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Butyl 10-undecenoate 109-42-2 When ready for use, the end-use concentration is not to exceed 100 ppm

n-Butyl benzoate 136-60-7 When ready for use, the end-use concentration is not to exceed 15,000 ppm

n-Butyl 2-methylbutyrate 15706-73-7 When ready for use, the end-use concentration is not to exceed 100 ppm

n-Butyl-3-hydroxybutyrate 53605-94-0 Solvent

α-Butylcinnamaldehyde 7492-44-6 When ready for use, the end-use concentration is not to exceed 33 ppm

2-sec-Butylcyclohexanone 14765-30-1 When ready for use, the end-use concentration is not to exceed 33 ppm

γ-Butyrolactone 96-48-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Cadinene 29350-73-0; 523-47-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Cajeput oil (Melaleuca leucadendron L.) 8008-98-8 When ready for use, the end-use concentration is not to exceed 33 ppm

Calcium bisulfate When ready for use, the end-use concentration is not to exceed 2,000 ppm

Calcium sulfate 7778-18-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Camphene 79-92-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Camphor 21368-68-3 When ready for use, the end-use concentration is not to exceed 33 ppm

Cananga oil 68606-83-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Capric (decanoic) acid 334-48-5 None

Caprylic (octanoic) acid 124-07-2 None

Cardamom (Elettaria cardamomum (L.) Maton) 85940-32-5 When ready for use, the end-use concentration is not to exceed 33 ppm

Cardamom seed oil (Elettaria cardamomum (L.) Maton) 8000-66-6 When ready for use, the end-use concentration is not to exceed 33 ppm

δ-3-Carene 13466-78-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Carvacrol 499-75-2 When ready for use, the end-use concentration is not to exceed 100 ppm

4-Carvomenthenol 562-74-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Carvyl acetate 97-42-7 When ready for use, the end-use concentration is not to exceed 100 ppm

β-Caryophyllene 87-44-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Cassia bark oil 8007-80-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Celery seed oil 8015-90-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Chamomile flower, Roman, oil (Anthemis nobilis L.) 8015-92-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Cinnamic acid; trans-Cinnamic acid 621-82-9; 140-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm

cinnamic aldehyde 104-55-2 When ready for use, the end-use concentration is not to exceed 100 ppm

cinnamic alcohol 104-54-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Cinnamon leaf oil 84649-98-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Cinnamyl acetate 103-54-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Cinnamyl benzoate 5320-75-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Cinnamyl cinnamate 122-69-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Cinnamyl formate 104-65-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Cinnamyl isobutyrate 103-59-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Cinnamyl propionate 103-56-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Citral 5392-40-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Citral dimethyl acetal 7549-37-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Citronellal 106-23-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Citronellol 106-22-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Citronelloxyacetaldehyde 7492-67-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Citronellyl acetate 150-84-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Citronellyl butyrate 141-16-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Citronellyl formate 105-85-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Citronellyl isobutyrate 97-89-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Citronellyl propionate 141-14-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Citronellyl tiglate 24717-85-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Citrus, ext. 94266-47-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Clary oil (Salvia sclarea L.) 8016-63-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Cloves (Eugenia spp.) 84961-50-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Cognac oil, green 8016-21-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Copper sulfate pentahydrate 7758-99-8 When ready for use, the end-use concentration is not to exceed 80 ppm

Coriander oil (Coriandrum sativum L.) 8008-52-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Cornmint oil 68917-18-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Cuminaldehyde 122-03-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Currant buds black absolute (Ribes nigrum L.) 68606-81-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Cyclohexadiene, methyl- 30640-46-1; 1888-90-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Cyclohexene, 1-methyl-4-(1-methylethylidene)- 586-62-9 When ready for use, the end-use concentration is not to exceed 100 ppm

1-Cyclohexylethanol 1193-81-3 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Cyclohexylethyl acetate 21722-83-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Cyclopentaneacetai acid, 3-oxo-2-pentyl-, methyl ester 24851-98-7 When ready for use, the end-use concentration is not to exceed 33 ppm

Cyclopropanemethanol, 1-methyl-2-[(1,2,2-trimethylbicyclo[3.1.0]hex-3-yl)methyl]- 198404-98-7 When ready for use, the end-use concentration is not to exceed 33 ppm

p-Cymene 99-87-6 When ready for use, the end-use concentration is not to exceed 100 ppm

β-Damascone, (Z)- 23726-92-3 When ready for use, the end-use concentration is not to exceed 100 ppm

δ-decalactone 705-86-2 When ready for use, the end-use concentration is not to exceed 100 ppm

γ-decalactone 706-14-9 When ready for use, the end-use concentration is not to exceed 100 ppm

ε-Decalactone 5579-78-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Decanal 112-31-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Decanoic acid, 4-hydroxy-4-methyl-γ-lactone 7011-83-8 When ready for use, the end-use concentration is not to exceed 100 ppm

1-Decanol 112-30-1 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Decenal 3913-71-1 When ready for use, the end-use concentration is not to exceed 100 ppm

(E)-4-Decenal 65405-70-1 When ready for use, the end-use concentration is not to exceed 100 ppm

4-Decenal 30390-50-2 When ready for use, the end-use concentration is not to exceed 100 ppm

9-Decenal 39770-05-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Decyl acetate 112-17-4 When ready for use, the end-use concentration is not to exceed 100 ppm

D-Glucopyranose, oligomeric, decyl octyl glycosides 68515-73-1 None

1,3-dibromo-5,5-dimethylhydantoin 77-48-5 None

1,1-diethoxy-3,7-dimethylocta-2,6-diene 7492-66-2 When ready for use, the end-use concentration is not to exceed 100 ppm

diethyl malonate 105-53-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Diethyl sebacate 110-40-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Diethyl tartrate 87-91-2 When ready for use, the end-use concentration is not to exceed 100 ppm

dihydro-beta-ionone 17283-81-7 When ready for use, the end-use concentration is not to exceed 100 ppm

dihydrocarvyl acetate 20777-49-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Diisobutyl ketone 108-83-8 When ready for use, the end-use concentration is not to exceed 33 ppm

m-Dimethoxybenzene 151-10-0 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Dimethoxybenzene 150-78-7 When ready for use, the end-use concentration is not to exceed 100 ppm

2,6-Dimethoxyphenol 91-10-1 When ready for use, the end-use concentration is not to exceed 100 ppm

3,4-Dimethyl-1,2-cyclopentadione 13494-06-9 When ready for use, the end-use concentration is not to exceed 33 ppm

3,7-Dimethyl-1-octanol 106-21-8 When ready for use, the end-use concentration is not to exceed 100 ppm

2,2-Dimethyl-1,3-dioxolane-4-methanol 100-79-8

2,6-Dimethyl-4-heptanol 108-82-7 When ready for use, the end-use concentration is not to exceed 100 ppm

2,6-Dimethyl-5-heptanal 106-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm

3,7-Dimethyl-1,3,6-octatriene 13877-91-3 When ready for use, the end-use concentration is not to exceed 100 ppm

3,7-Dimethyl-6-octenoic acid 502-47-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Dimethylbenzylcarbinyl acetate 151-05-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Dimethylcyclohex-3-ene-1-carbaldehyde 27939-60-2 When ready for use, the end-use concentration is not to exceed 100 ppm

α,α-Dimethylphenethyl alcohol 100-86-7 When ready for use, the end-use concentration is not to exceed 100 ppm

2,5-Dimethylpyrazine 123-32-0 When ready for use, the end-use concentration is not to exceed 33 ppm

2,6-Dimethylpyrazine 108-50-9 When ready for use, the end-use concentration is not to exceed 33 ppm

p,α-Dimethylstyrene 1195-32-0 When ready for use, the end-use concentration is not to exceed 100 ppm

6,10-Dimethylundeca-5,9-dien-2-one 689-67-8 When ready for use, the end-use concentration is not to exceed 33 ppm

Di-n-butyl carbonate 542-52-9 When ready for use, the end-use concentration is not to exceed 15,000 ppm

Dipropylene glycol 25265-71-8 None

1-docosanol 661-19-8

γ-Dodecalactone 2305-05-7 When ready for use, the end-use concentration is not to exceed 100 ppm

δ-Dodecalactone 713-95-1 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Dodecanol, (2E)- 20407-84-5 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Dodecenal 4826-62-4 When ready for use, the end-use concentration is not to exceed 100 ppm

1-eicosanol 629-96-9

Ethanol 64-17-5 None

Elemi oil (Canarium spp.) 8023-89-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl acetate 141-78-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl amyl ketone 106-68-3 When ready for use, the end-use concentration is not to exceed 33 ppm

Ethyl anthranilate 87-25-2 When ready for use, the end-use concentration is not to exceed 100 ppm

4-Ethylbenzaldehyde 4748-78-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl benzoylacetate 94-02-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl butyrate 105-54-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl cinnamate 103-36-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl (2E,4Z)-2,4-decadienoate 3025-30-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl decanoate 110-38-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl formate 109-94-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl heptanoate 106-30-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl hexanoate 123-66-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl 2-hexylacetoacetate 29214-60-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl 3-hydroxybutyrate 5405-41-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl isobutyrate 97-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl isovalerate 108-64-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl laurate 106-33-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl levulinate 539-88-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl maltol 4940-11-8 When ready for use, the end-use concentration is not to exceed 33 ppm

Ethyl 2-methyl-3-pentenoate 1617-23-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl 2-methylbutyrate 452-79-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl 2-methylpentanoate 39255-32-8 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Ethyl-3-methylpyrazine 15707-23-0 When ready for use, the end-use concentration is not to exceed 33 ppm

Ethyl nonanoate 123-29-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl octanoate 106-32-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl propionate 105-37-3 When ready for use, the end-use concentration is not to exceed 100 ppm

ethyl salicylate 118-61-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl tiglate 5837-78-5 When ready for use, the end-use concentration is not to exceed 100 ppm

ethylene brassylate 105-95-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt 64-02-8 None

4-Ethylguaiacol 2785-89-9 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Ethylphenol 123-07-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl phenylacetate 101-97-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethyl 3-phenylpropionate 2021-28-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Ethylvanillin 121-32-4 When ready for use, the end-use concentration is not to exceed 33 ppm

Eucalyptus oil 8000-48-4 When ready for use, the end-use concentration is not to exceed 33 ppm

Eugenyl acetate 93-28-7 When ready for use, the end-use concentration is not to exceed 100 ppm

FD&C Green No. 3 CAS Reg. No. 2353-45-9 None

FD&C Red No. 40 25956-17-6 When ready for use, the end-use concentration is not to exceed 20 ppm

FD&C Yellow No. 5 1934-21-0 When ready for use, the end-use concentration is not to exceed 1000 ppm

α-Farnesene 125037-13-0; 502-61-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Farnesol 4602-84-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Farnesyl acetate 29548-30-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Fenchone 4695-62-9 When ready for use, the end-use concentration is not to exceed 33 ppm

2-Formyl-6,6-dimethylbicyclo(3.1.1)hept-2-ene 564-94-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Galbanum oil (Ferula spp.) 8023-91-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Geranic acid 459-80-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Geraniol 106-24-1 When ready for use, the end-use concentration is not to exceed 100 ppm

(E)-Geraniol 106-24-1 When ready for use, the end-use concentration is not to exceed 100 ppm

(E)-Geraniol acetate 105-87-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Geranyl benzoate 94-48-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Geranyl butyrate 106-29-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Geranyl formate 105-86-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Geranyl isobutyrate 2345-26-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Geranyl phenylacetate 102-22-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Geranyl propionate 105-90-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Geranyl tiglate 7785-33-3 When ready for use, the end-use concentration is not to exceed 100 ppm

C1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 When ready for use, the end-use concentration is not to exceed 500 ppm

D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, None

D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned) None

D-glucurono-6-deoxy-L-manno-D-glucan, acetate, calcium magnesium potassium sodium salt (diutan gum) (CAS No. 595585-15-2) None

glyceryl triacetate 102-76-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Guaiacol 90-05-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Guaiene 88-84-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Helichrysum leaf oil (Helichrysum angustifolium) 8023-95-8 When ready for use, the end-use concentration is not to exceed 100 ppm

γ-Heptalactone 105-21-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Heptanal 111-71-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Heptanal, 2-(phenlymethylene)- 122-40-7 When ready for use, the end-use concentration is not to exceed 33 ppm

Heptanoic acid 111-14-8 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Heptanol 543-49-7 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Heptanone 106-35-4 When ready for use, the end-use concentration is not to exceed 33 ppm

2-hepten-4-one, 5-methyl- 81925-81-7 When ready for use, the end-use concentration is not to exceed 100 ppm

trans-3-Heptenyl 2-methylpropanoate 67801-45-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Heptyl acetate 112-06-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Heptyl alcohol 111-70-6 When ready for use, the end-use concentration is not to exceed 100 ppm

γ-Hexalactone 695-06-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexanal 66-25-1 When ready for use, the end-use concentration is not to exceed 100 ppm

2,3-Hexanedione 3848-24-6 When ready for use, the end-use concentration is not to exceed 33 ppm

Hexanoic acid 142-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm

n-Hexanol 111-27-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexadecanoic acid 57-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexadecanoic acid, ethyl ester 628-97-7 When ready for use, the end-use concentration is not to exceed 100 ppm

ω-6-Hexadecenlactone 7779-50-2 When ready for use, the end-use concentration is not to exceed 100 ppm

2,4-Hexadienyl isobutyrate 16491-24-0 When ready for use, the end-use concentration is not to exceed 100 ppm

1-Hexanol, 2-ethyl- 104-76-7 When ready for use, the end-use concentration is not to exceed 33 ppm

1-Hexanol, 3,5,5-trimethyl- 3452-97-9 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Hexenal, (2E)- 6728-26-3 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Hexen-1-ol 2305-21-7 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Hexen-1-ol, (3Z)- 928-96-1 When ready for use, the end-use concentration is not to exceed 100 ppm

(E)-2-Hexen-1-yl acetate 2497-18-9 When ready for use, the end-use concentration is not to exceed 100 ppm

(Z)-3-Hexenol 928-96-1 When ready for use, the end-use concentration is not to exceed 100 ppm

(Z)-3-Hexenol acetate 3681-71-8 When ready for use, the end-use concentration is not to exceed 100 ppm

cis-3-Hexenyl benzoate 25152-85-6 When ready for use, the end-use concentration is not to exceed 100 ppm

cis-3-Hexenyl butyrate 16491-36-4 When ready for use, the end-use concentration is not to exceed 100 ppm

5-(cis-3-Hexenyl)dihydro-5-methyl-2(3H)furanone 70851-61-5 When ready for use, the end-use concentration is not to exceed 100 ppm

cis-3-Hexenyl hexanoate 31501-11-8 When ready for use, the end-use concentration is not to exceed 100 ppm

cis-3-Hexenyl isobutyrate 41519-23-7 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Hexenyl 2-methylbutanoate 10094-41-4 When ready for use, the end-use concentration is not to exceed 100 ppm

cis-3-Hexenyl propionate 33467-74-2 When ready for use, the end-use concentration is not to exceed 100 ppm

cis-3-Hexenyl tiglate 67883-79-8 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Hexenyl formate 9/5/2315 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexyl acetate 142-92-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexyl benzoate 6789-88-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexyl butyrate 2639-63-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexyl hexanoate 6378-65-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexyl isobutyrate 2349-07-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexyl 2-methylbutanoate 10032-15-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexyl octanoate 1117-55-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Hexyl propionate 2445-76-3 When ready for use, the end-use concentration is not to exceed 100 ppm

α-Hexylcinnamaldehyde 101-86-0 When ready for use, the end-use concentration is not to exceed 33 ppm

Hydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 91 ppm

4-Hydroxy-2,5-dimethyl-3(2H)-furanone 3658-77-3 When ready for use, the end-use concentration is not to exceed 33 ppm

Hydroxycitronellal 107-75-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Hydroxycitronellal dimethyl acetal 141-92-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Hydroxycitronellol 107-74-4 When ready for use, the end-use concentration is not to exceed 100 ppm

1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione 123944-63-8 When ready for use, the end-use concentration is not to exceed 300 ppm

Hydroxynonanoic acid, δ-lactone 3301-94-8 When ready for use, the end-use concentration is not to exceed 100 ppm

4-(p-hydroxyphenyl)-2-butanone 5471-51-2 When ready for use, the end-use concentration is not to exceed 100 ppm

5-hydroxyundecanoic acid lactone 710-04-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Hypochlorous acid 7790-92-3 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine.

Hypochlorous acid, sodium salt 7681-52-9 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine

Hyssop oil (Hyssopus officinalis L.) 8006-83-5 When ready for use, the end-use concentration is not to exceed 100 ppm

1H-Indole 120-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Iodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine

α-Ionone 127-41-3 When ready for use, the end-use concentration is not to exceed 100 ppm

γ-Ionone 79-76-5 When ready for use, the end-use concentration is not to exceed 100 ppm

α-Irone 79-69-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoamyl acetate 123-92-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoamyl alcohol 123-51-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoamyl benzoate 94-46-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoamyl butyrate 106-27-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoamyl cinnamate 7779-65-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoamyl isovalerate 659-70-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoamyl phenylacetate 102-19-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoamyl propionate 105-68-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoamyl salicylate 87-20-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoborneol 124-76-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobornyl acetate 125-12-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobutyl acetate 110-19-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobutyl angelate 7779-81-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobutyl benzoate 120-50-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobutyl 2-butenoate 589-66-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobutyl butyrate 539-90-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobutyl cinnamate 122-67-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobutyl isobutyrate 97-85-8 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Isobutyl-3-methoxypyrazine 24683-00-9 When ready for use, the end-use concentration is not to exceed 33 ppm

2-Isobutyl-2-methyl-1,3-dioxolane-4-methanol 5660-53-7

Isobutyl phenylacetate 102-13-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobutyl salicylate 87-19-4 When ready for use, the end-use concentration is not to exceed 100 ppm

α-Isobutylphenethyl alcohol 7779-78-4 When ready for use, the end-use concentration is not to exceed 33 ppm

Isobutyraldehyde 78-84-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Isobutyric acid 79-31-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoeugenol 97-54-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Isoeugenyl acetate 93-29-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Isojasmone 11050-62-7 When ready for use, the end-use concentration is not to exceed 33 ppm

d,l-Isomenthone 491-07-6 When ready for use, the end-use concentration is not to exceed 33 ppm

iso-Methyl-β-ionone 79-89-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Isopropyl acetate 108-21-4 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Isopropylacetophenone 645-13-6 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Isopropylbenzyl alcohol 536-60-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Isopropyl-3-hydroxybutyrate 54074-94-1 Solvent

Isopropyl 2-methylbutyrate 66576-71-4 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Isopropyl-4-methylthiazole 15679-13-7 When ready for use, the end-use concentration is not to exceed 33 ppm

2-Isopropylphenol 88-69-7 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Isopropyl phenylacetaldehyde 4395-92-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Isopulegol 89-79-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Isovaleric acid 503-74-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Jasmine lactone 25524-95-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Jasmine oil (Jasminum grandiflorum L.) 8022-96-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Juniper oil (Juniperus communis L.) 8002-68-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Labdanum oil (Cistus spp.) 8016-26-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Lactic acid (including l-lactic acid) 50-21-5, 79-33-4 When ready for use, the end-use concentration is not to exceed 10,000 ppm in antimicrobial formulations applied to food-contact surfaces in public eating places

laevo-Bornyl acetate 5655-61-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Lauryl acetate 112-66-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Lauric acid 143-07-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Lauric aldehyde 112-54-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Lauryl alcohol 112-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Lavandin oil (Lavandula hybrida) 8022-15-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Levulinic acid 123-76-2 When ready for use, the end-use concentration is not to exceed 100 ppm

d-Limonene 5989-27-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalool 78-70-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalool acetate 115-95-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalool oxide 60047-17-8 When ready for use, the end-use concentration is not to exceed 33 ppm

(E)-Linalool oxide 34995-77-2 When ready for use, the end-use concentration is not to exceed 33 ppm

(Z)-Linalool oxide 5989-33-3 When ready for use, the end-use concentration is not to exceed 33 ppm

Linalyl acetate 115-95-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalyl benzoate 126-64-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalyl cinnamate 78-37-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalyl formate 115-99-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalyl hexanoate 7779-23-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalyl isobutyrate 78-35-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalyl isovalerate 1118-27-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Linalyl propionate 144-39-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Linoleic acid, methyl ester 112-63-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Lipase, triacylglycerol 9001-62-1 When ready for use, the end-use concentration is not to exceed 500 ppm

Lovage oil (Levisticum officinale Koch) 8016-31-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Mace oil (Myristica fragrans Houtt.) 8007-12-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Magnesium oxide 1309-48-4 None

Magnesium sulfate anhydrous 7487-88-9 When ready for use, the end-use concentration is not to exceed 4400 ppm

Magnesium sulfate heptahydrate 10034-99-8 When ready for use, the end-use concentration is not to exceed 4400 ppm

Magnesium sulfate hexahydrate 7830-18-1 When ready for use, the end-use concentration is not to exceed 4400 ppm

Magnesium sulfate monohydrate 14168-73-1 When ready for use, the end-use concentration is not to exceed 4400 ppm

Magnesium sulfate pentahydrate 5553-21-6 When ready for use, the end-use concentration is not to exceed 4400 ppm

Magnesium sulfate tetrahydrate 24378-31-2 When ready for use, the end-use concentration is not to exceed 4400 ppm

Magnesium sulfate trihydrate 15320-30-6 When ready for use, the end-use concentration is not to exceed 4400 ppm

Maltyl isobutyrate 65416-14-0 When ready for use, the end-use concentration is not to exceed 33 ppm

p-Mentha-1,8-dien-7-ol 536-59-4 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Mentha-1,8-dien-7-yl acetate 15111-96-3 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Mentha-8-thiol-3-one 38462-22-5 When ready for use, the end-use concentration is not to exceed 33 ppm

p-Menthan-3-one 10458-14-7 When ready for use, the end-use concentration is not to exceed 33 ppm

p-Menthane, 1,8-epoxy- 470-82-6 When ready for use, the end-use concentration is not to exceed 33 ppm

1-p-Menthene-8-thiol 71159-90-5 When ready for use, the end-use concentration is not to exceed 33 ppm

Menthol 15356-70-4; 89-78-1; 1490-04-6 When ready for use, the end-use concentration is not to exceed 100 ppm

4-Mercapto-4-methyl-2-pentanone 19872-52-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Methane sulfonic acid 75-75-2 When ready for use, the end use concentration is not to exceed 5,000 ppm

1H-3a,7-Methanoazulen-6-ol, octahydro-3,6,8,8-tetramethyl-,[3R-(3.α,3a.β,6.α,7.β,8aα)] 77-53-2 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methoxy-3-(1-methylpropyl)pyrazine 24168-70-5 When ready for use, the end-use concentration is not to exceed 33 ppm

2-methoxy-4-propylphenol 2785-87-7 When ready for use, the end-use concentration is not to exceed 100 ppm

4-Methoxy-2-methyl-2-butanethiol 94087-83-9 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methoxy-4-methylphenol 93-51-6 When ready for use, the end-use concentration is not to exceed 100 ppm

4-(p-Methoxyphenyl)-2-butanone 104-20-1 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methoxy-4-vinylphenol 7786-61-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Methylene blue 61-73-4 When ready for use, the end-use concentration is not to exceed 0.4 ppm

Methyl-α-ionone 127-42-4 When ready for use, the end-use concentration is not to exceed 100 ppm

4′-methylacetophenone 122-00-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl n-amyl ketone 110-43-0 When ready for use, the end-use concentration is not to exceed 33 ppm

Methyl anthranilate 134-20-3 When ready for use, the end-use concentration is not to exceed 100 ppm

alpha-methylbenzyl alcohol 98-85-1 When ready for use, the end-use concentration is not to exceed 100 ppm

methyl benzoate 93-58-3 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Methyl-2-butenyl acetate 1191-16-8 When ready for use, the end-use concentration is not to exceed 100 ppm

alpha-methylcinnamaldehyde 101-39-3 When ready for use, the end-use concentration is not to exceed 100 ppm

methyl cinnamate 103-26-4 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Methyl-1-cyclopentadecanone 541-91-3 When ready for use, the end-use concentration is not to exceed 33 ppm

Methylcyclopentenolone 80-71-7 When ready for use, the end-use concentration is not to exceed 33 ppm

3-Methylcrotonic acid 541-47-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl 3,7-dimethyl-6-octenoate 2270-60-2 When ready for use, the end-use concentration is not to exceed 100 ppm

6-Methyl-3,5-heptadien-2-one 1604-28-0 When ready for use, the end-use concentration is not to exceed 33 ppm

6-Methyl-5-hepten-2-one 110-93-0 When ready for use, the end-use concentration is not to exceed 33 ppm

Methyl heptine carbonate 111-12-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl hexanoate 106-70-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl linolenate 301-00-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl 2-methylbutyrate 868-57-5 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methyl-3-(p-isopropylphenyl)propionaldehyde 103-95-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl N-acetylanthranilate 2719-08-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl anisate 121-98-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl N-methylanthranilate 85-91-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl 2-nonenoate 111-79-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl 2-nonynoate 111-80-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl 3-nonenoate 13481-87-3 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Methyl-2-(n-pentanyl)-2-cyclopenten-1-one 1128-08-1 When ready for use, the end-use concentration is not to exceed 33 ppm

3-Methyl-2-(2E)-2-penten-1-yl-2-cyclopenten-1-one 6261-18-3 When ready for use, the end-use concentration is not to exceed 33 ppm

3-Methyl-2-(2-pentenyl)-2-cyclopenten-1-one, (Z)- 488-10-8 When ready for use, the end-use concentration is not to exceed 33 ppm

Methyl phenethyl ether 3558-60-9 When ready for use, the end-use concentration is not to exceed 33 ppm

2-Methyl-4-phenyl-2-butanol 103-05-9 When ready for use, the end-use concentration is not to exceed 100 ppm

5-Methyl-2-phenyl-2-hexenal 21834-92-4 When ready for use, the end-use concentration is not to exceed 33 ppm.

p-Methylanisole 104-93-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Methylbenzyl acetate (mixed o,m,p) 360676-70-1; 2216-45-7; 17373-93-2 When ready for use, the end-use concentration is not to exceed 100 ppm

α-Methylbenzyl propionate 120-45-6 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Methyl-2-butenyl benzoate 5205-11-8 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Methylindole 83-34-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl-α-ionone 127-42-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl-β-ionone 127-43-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl o-methoxybenzoate 606-45-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl 3-methylthiopropionate 13532-18-8 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methyloctanal 7786-29-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl octanoate 111-11-5 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methylpent-2-en-1-oic acid 3142-72-1 When ready for use, the end-use concentration is not to exceed 100 ppm

β-Methylphenethyl alcohol 1123-85-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl phenylacetate 101-41-7 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methyl-4-phenyl-2-butyl acetate 103-07-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl n-propyl ketone 107-87-9 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methyl-4-propyl-1,3-oxathiane 67715-80-4 When ready for use, the end-use concentration is not to exceed 33 ppm

2-Methylpyrazine 109-08-0 When ready for use, the end-use concentration is not to exceed 33 ppm

methyl salicylate 119-36-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl sulfide 75-18-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Methyl tetradecanoate 124-10-7 When ready for use, the end-use concentration is not to exceed 100 ppm

5-Methyl-2-thiophenecarboxyaldehyde 13679-70-4 When ready for use, the end-use concentration is not to exceed 33 ppm

2-Methyl-trans-2-butenoic acid 80-59-1 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Methyl-5-(2,2,3-trimethyl-3-cyclopenten-1-yl)pent-4-en-2-ol 67801-20-1 When ready for use, the end-use concentration is not to exceed 33 ppm

Methyl undec-10-enoate 111-81-9 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methylundecanal 110-41-8 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Methyl-1,3-propanediol 2163-42-0 None

Musk ambrette 123-69-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Myristaldehyde 124-25-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Myristic acid 544-63-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Nerol oxide 1786-08-9 When ready for use, the end-use concentration is not to exceed 33 ppm

Nerolidiol 142-50-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Neroli bigarde oil (Citrus aurantium L.) 8016-38-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Nerolidol (isomer unspecified) 7212-44-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Neryl acetate 141-12-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Neryl formate 2142-94-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Nitric acid 7697-37-2 When ready for use, the end-use concentration is not to exceed 1,000 ppm

Nona-2-trans-6-cis-dienal 557-48-2 When ready for use, the end-use concentration is not to exceed 100 ppm

2,6-Nonadien-1-ol 7786-44-9 When ready for use, the end-use concentration is not to exceed 100 ppm

2,6-Nonadienal diethyl acetal 67674-36-6 When ready for use, the end-use concentration is not to exceed 100 ppm

1,3-Nonanediol acetate (mixed esters) 1322-17-4 When ready for use, the end-use concentration is not to exceed 100 ppm

γ-Nonalactone 104-61-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Nonanal 124-19-6 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Nonanone 821-55-6 When ready for use, the end-use concentration is not to exceed 33 ppm

6-nonenal, (6Z)- 2277-19-2 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Nonenal 2463-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm

cis-6-nonen-1-ol 35854-86-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Nonyl acetate 143-13-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Nonyl alcohol 143-08-8 When ready for use, the end-use concentration is not to exceed 100 ppm

α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles) None None

Nootkatone 4674-50-4 When ready for use, the end-use concentration is not to exceed 33 ppm

Octadecanoic acid 57-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Octadecanoic acid, calcium salt 1592-23-0 None

1-octadecanol 112-92-5

9-Octadecenoic acid (9Z)-, sulfonated, oxidized 1315321-93-7 When ready for use, the end-use concentration is not to exceed 250 ppm

9-Octadecenoic acid (9Z)-, sulfonated, oxidized, potassium salts 1315321-94-8 When ready for use, the end-use concentration is not to exceed 250 ppm

9-Octadecenoic acid (9Z)-, sulfonated, oxidized, sodium salts 1315321-95-9 When ready for use, the end-use concentration is not to exceed 250 ppm

2,6-Octadien-1-ol, 3,7-dimethyl-,(Z)- 106-25-2 When ready for use, the end-use concentration is not to exceed 100 ppm

γ-Octalactone 104-50-7 When ready for use, the end-use concentration is not to exceed 100 ppm

δ-Octalactone 698-76-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Octanal 124-13-0 When ready for use, the end-use concentration is not to exceed 100 ppm

octanal dimethyl acetal 10022-28-3 When ready for use, the end-use concentration is not to exceed 100 ppm

1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 46 ppm

1-Octanol 111-87-5 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Octanone 111-13-7 When ready for use, the end-use concentration is not to exceed 33 ppm

2,5,7-Octatrien-1-ol, 2,6-dimethyl0, 1-acetate 197098-61-6 When ready for use, the end-use concentration is not to exceed 100 ppm

1-Octen-3-ol 3391-86-4 When ready for use, the end-use concentration is not to exceed 33 ppm

5-Octen-1-ol, (5Z)- 64275-73-6 When ready for use, the end-use concentration is not to exceed 100 ppm

1-Octen-3-yl acetate 2442-10-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Oil of Bergamot 8007-75-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Oil of camphor 8008-51-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Oil of citronella 8000-29-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Oil of orange 8008-57-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, clove 8000-34-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, Fir 8021-29-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, geranium 8000-46-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, ginger 8007-08-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, grapefruit 8016-20-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, lavender 8000-28-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, lemon, terpene-free 68648-39-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Oil of lemon 8008-56-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Oil of lemongrass 8007-02-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, lime 8008-26-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, mimosa 8031-03-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, orange, sweet, terpene-free 68606-94-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, palmarosa 8014-19-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, peppermint 8006-90-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, rosemary 8000-25-7 When ready for use, the end-use concentration is not to exceed 33 ppm

Oils, sage 8022-56-8 When ready for use, the end-use concentration is not to exceed 33 ppm

Oils, spruce 8008-80-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Oils, thyme 8007-46-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Oleic acid 112-80-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Oleic acid, ethyl ester 111-62-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Oleyl alcohol 143-28-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Olibanum oil (Boswellia spp.) 8016-36-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Orange flower water absolute 8030-28-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Origanum oil, Spanish 8007-11-2 When ready for use, the end-use concentration is not to exceed 33 ppm

Orris absolute (Iris pallida) 8002-73-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Ortho-benzyl-para-chlorophenol 120-32-1 When ready for use, the end-use concentration is not to exceed 2080 ppm

7-Oxabicyclo(2.2.1.)heptane, 1-methyl-4-(1-methylethyl)- 470-67-7 When ready for use, the end-use concentration is not to exceed 33 ppm

Oxacycloheptadec-10-ene-2-one 28645-51-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 9003-11-6 None

Palmitic acid 57-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Paraffin waxes and hydrocarbon waxes; carboxypolymethylene resin; and paraffin waxes and hydrocarbon, oxidized, lithium salts 8002-74-2; 68153-22-0; 68649-48-9

Pelargonic (nonanoic) acid 112-05-0 None

ω-Pentadecalactone 106-02-5 When ready for use, the end-use concentration is not to exceed 100 ppm

1-pentanol 71-41-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Pepper, black, oil (Piper nigrum L.) 8006-82-4 When ready for use, the end-use concentration is not to exceed 100 ppm

peppermint (Mentha piperita) ext. 84082-70-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Peroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 58 ppm

Peroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 52 ppm

Petitgrain bigarade oil 8014-17-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Petitgrain Paraguay oil 8014-17-3 When ready for use, the end-use concentration is not to exceed 100 ppm

α-Phellandrene 99-83-2 When ready for use, the end-use concentration is not to exceed 100 ppm

phenethyl acetate 103-45-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenethyl butyrate 103-52-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenethyl cinnamate 103-53-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenethyl formate 104-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenethyl hexanoate 6290-37-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenethyl propionate 122-70-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenethyl salicylate 87-22-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenethyl tiglate 55719-85-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenol, 2-methoxy-4-(2-propenyl)- 97-53-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenol, 2,4,6-trimethyl- 527-60-6 When ready for use, the end-use concentration is not to exceed 100 ppm

phenyl ethyl alcohol 60-12-8 When ready for use, the end-use concentration is not to exceed 100 ppm

phenethyl isobutyrate 103-48-0 When ready for use, the end-use concentration is not to exceed 100 ppm

phenethyl phenylacetate 102-20-5 When ready for use, the end-use concentration is not to exceed 100 ppm

phenylacetaldehyde dimethyl acetal 101-48-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenylacetaldehyde glyceryl acetal 29895-73-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenylacetic acid 103-82-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Phenylethyl isoamyl ether 56011-02-0 When ready for use, the end-use concentration is not to exceed 33 ppm

2-phenylethyl 2-methylbutyrate 24817-51-4 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Phenylpropionaldehyde 104-53-0 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Phenylpropionic acid 501-52-0 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Phenylpropyl acetate 122-72-5 When ready for use, the end-use concentration is not to exceed 100 ppm

3-Phenylpropyl cinnamate 122-68-9 When ready for use, the end-use concentration is not to exceed 100 ppm

3-phenyl-1-propanol 122-97-4 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Phenylpropionaldehyde 93-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Phenylpropionaldehyde dimethyl acetal 90-87-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Phosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 14 ppm

Phosphoric acid 7664-38-2

Phosphoric acid, trisodium salt 7601-54-9 When ready for use, the end-use concentration is not to exceed 5916 ppm

Pine needle oil 8000-26-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Pine scotch oil (Pinus sylvestris L.) 8023-99-2 When ready for use, the end-use concentration is not to exceed 100 ppm

α-Pinene 80-56-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Piperonyl acetate 326-61-4 When ready for use, the end-use concentration is not to exceed 33 ppm

Polyammonium bisulfate 10043-02-4 When ready for use, the end-use concentration is not to exceed 250 ppm

Potassium 2-benzyl-4-chlorophenate 35471-49-9 When ready for use, the end-use concentration is not to exceed 2080 ppm

Potassium bromide 7758-02-3 When ready for use, the end-use concentration is not to exceed 46 ppm total available halogen

Potassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine

1,3-Propanediol 504-63-2 None

propanoic acid, 2-methyl-, 4-formyl-2-methoxyphenyl ester 20665-85-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Propanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Propenylguaethol 94-86-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Propionic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Propyl phenethyl acetal 7493-57-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Propylene glycol 57-55-6 None

α-Propylphenethyl alcohol 705-73-7 When ready for use, the end-use concentration is not to exceed 100 ppm

o-Propylphenol 644-35-9 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Propylphenol 645-56-7 When ready for use, the end-use concentration is not to exceed 100 ppm

4H-Pyran-4-one, 3-hydroxy-2-methyl- 118-71-8 When ready for use, the end-use concentration is not to exceed 33 ppm

2,6-Pyridinedicarboxylic acid 499-83-2 When ready for use, the end-use concentration is not to exceed 2 ppm

Pyruvic acid 127-17-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Quaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides 8001-54-5 When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound

Quaternary ammonium compounds: n-alkyl (C12-18) dimethyl benzyl ammonium chloride 68424-85-1 When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound

Quaternary Ammonium Compounds: n-alkyl (C 12-14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 85409-23-0 When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound

Quaternary ammonium compounds n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 None When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound

Quaternary ammonium compounds, Di-n-Alkyl (C8-10) dimethyl ammonium chloride, average molecular weight (in amu) 332 to 361 None When ready for use, the end-use concentration of these specific in quaternary ammonium compounds is not to exceed 240 ppm of active quaternary ammonium compound; the end-use concentration of all quaternary chemicals in the solution is not to exceed 400 ppm of active quaternary compound

Quaternary ammonium compounds, didecyl dimethyl ammonium carbonate/didecyl dimethyl ammonium bicarbonate 148788-55-0/148812-654-1 When ready for use, the end-use concentration of these specific ammonium compounds is not to exceed 400 ppm of active quaternary ammonium compound

Rice bran wax 8016-60-2 None

Rose absolute (Rosa spp.) 8007-01-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Rue oil (Ruta graveolens L.) 8014-29-7 When ready for use, the end-use concentration is not to exceed 33 ppm

Salicylaldehyde 90-02-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Sandalwood yellow oil (Santalum album L.) 8006-87-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Santalol 11031-45-1 When ready for use, the end-use concentration is not to exceed 100 ppm

cis-α-Santalol 115-71-9 When ready for use, the end-use concentration is not to exceed 100 ppm

cis-β-Santalol 77-42-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Schinus molle oil (Schinus molle L.) 68917-52-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Sclareol 515-03-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Silver ions resulting from the use of electrolytically-generated silver ions stabilized in citric acid as silver dihydrogen citrate (does not include metallic silver) 14701-21-4 When ready for use, the end-use concentration of silver ions is not to exceed 50 ppm of active silver

Sodium 2-benzyl-4-chlorophenate 3184-65-4 When ready for use, the end-use concentration is not to exceed 2080 ppm

Sodium bisulfate 7681-38-1 When ready for use, the end-use concentration is not to exceed 2,000 ppm

Sodium dioctyl sulfosuccinate 577-11-7 None

Sodium lauroyl sarcosinate 137-16-6 When ready for use, the end-use concentration is not to exceed 10,000 ppm

Sorbitan, mono-9-octadecenoate, poly(oxy-1,2-ethanediyl) derivs., (Z)- 9005-65-6 None

Spike lavender oil (Lavandula spp.) 8016-78-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Stearic acid 57-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Storax (Liquidambar spp.) 8046-19-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Sulfonic acids, C14-16-alkane hydroxy and C14-16-alkene, sodium salts 68439-57-6 When ready for use, the end-use concentration is not to exceed 1%

Sulfuric acid 7664-93-9 Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils in antimicrobial formulations. Not to exceed 600 ppm

Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 When ready for use, the end-use concentration is not to exceed 350 ppm

Tagetes oil (Tagetes erecta L.) 8016-84-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Tall oil fatty acid (CAS Reg. No. 61790-12-3) Solvent/carrier

Tangerine oil (Citrus reticulata blanco) 8008-31-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Tartaric acid 87-69-4 When ready for use, the end-use concentration is not to exceed 100 ppm

DL-Tartaric acid 133-37-9 When ready for use, the end-use concentration is not to exceed 100 ppm

α-Terpinene 99-86-5 When ready for use, the end-use concentration is not to exceed 100 ppm

γ-Terpinene 99-85-4 When ready for use, the end-use concentration is not to exceed 100 ppm

α-Terpineol 98-55-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Terpinyl acetate (isomer mixture) 8007-35-0 When ready for use, the end-use concentration is not to exceed 100 ppm

1-tetradecanol 112-72-1

α-Terpinyl propionate 80-27-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Tetraacetylethylenediamine (TAED) 10543-57-4 None

Tetradecanoic acid, ethyl ester 124-06-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Tetradecanoic acid, 1-methylethyl ester 110-27-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Tetrahydrogeranial 5988-91-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Tetrahydrolinalool 78-69-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Tetrahydro-4-methyl-2-(2-methylpropen-1-yl)pyran 16409-43-1 When ready for use, the end-use concentration is not to exceed 33 ppm

Tetrahydro-6-(3-pentenyl)-2H-pyran-2-one 32764-98-0 When ready for use, the end-use concentration is not to exceed 33 ppm

Theaspirane 36431-72-8 When ready for use, the end-use concentration is not to exceed 33 ppm

Thiogeraniol 39067-80-6 When ready for use, the end-use concentration is not to exceed 100 ppm

thymol (8CA) 89-83-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Thyme (Thymus Vulgaris) Oil 84929-51-1 When ready for use, the end-use concentration is not to exceed 100 ppm

Tolu, balsam, gum (Myroxylon spp.) 9000-64-0 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Tolylacetaldehyde 104-09-6 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Tolyl acetate 140-39-6 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Tolyl isobutyrate 103-93-5 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Tolyl 3-methylbutyrate 55066-56-3 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Tolyl octanoate 59558-23-5 When ready for use, the end-use concentration is not to exceed 100 ppm

p-Tolyl phenylacetate 101-94-0 When ready for use, the end-use concentration is not to exceed 100 ppm

2-(p-Tolyl)propionaldehyde 99-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Trans-1,3,3,3-tetrafluoroprop-1-ene 29118-24-9 None

1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt 2893-78-9 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine

2-Tridecanal 7774-82-5 When ready for use, the end-use concentration is not to exceed 100 ppm

2-Tridecanone 593-08-8 When ready for use, the end-use concentration is not to exceed 33 ppm

triethyl citrate 77-93-0 When ready for use, the end-use concentration is not to exceed 100 ppm

Triethylene glycol 112-27-6 None

p-α,α-Trimethylbenzyl alcohol 1197-01-9 When ready for use, the end-use concentration is not to exceed 100 ppm

2,6,6-Trimethyl-1-cyclohexen-1-acetaldehyde 472-66-2 When ready for use, the end-use concentration is not to exceed 100 ppm

2,6,6-Trimethyl-1&2-cyclohexen-1-carboxaldehyde 432-25-7 When ready for use, the end-use concentration is not to exceed 100 ppm

1,3,3-trimethyl-2-norbornanyl acetate 13851-11-1 When ready for use, the end-use concentration is not to exceed 100 ppm

3,3,5-Trimethylcyclohexanol 116-02-9 When ready for use, the end-use concentration is not to exceed 100 ppm

(Z)-β-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one; (2E)-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one 35044-68-9; 23726-92-3; 23726-91-2 When ready for use, the end-use concentration is not to exceed 100 ppm

2,3,6-Trimethylphenol 2416-94-6 When ready for use, the end-use concentration is not to exceed 100 ppm

4,7,7-Trimethyl-6-thiabicyclo[3.2.1]octane 68398-18-5 When ready for use, the end-use concentration is not to exceed 100 ppm

delta-1-(2,6,6-trimethyl-3-cyclohexen-1-yl)-2-buten-1-one 57378-68-4 When ready for use, the end-use concentration is not to exceed 100 ppm

3,5,5-Trimethylhexanal 5435-64-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Turpentine, oil 8006-64-2 When ready for use, the end-use concentration is not to exceed 100 ppm

γ-Undecalactone 104-67-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Undecanal 112-44-7 When ready for use, the end-use concentration is not to exceed 100 ppm

1-undecanol 112-42-5 Carrier/Adjuvant and Coating Agent/Binder

2-Undecanone 112-12-9 When ready for use, the end-use concentration is not to exceed 33 ppm

1,3,5-Undecatriene 16356-11-9 When ready for use, the end-use concentration is not to exceed 100 ppm

9-Undecenal 143-14-6 When ready for use, the end-use concentration is not to exceed 100 ppm

10-Undecenal 112-45-8 When ready for use, the end-use concentration is not to exceed 100 ppm

10-Undecenoic acid 112-38-9 When ready for use, the end-use concentration is not to exceed 100 ppm

10-Undecenoic acid, ethyl ester 692-86-4 When ready for use, the end-use concentration is not to exceed 100 ppm

10-undecen-1-yl acetate 112-19-6 When ready for use, the end-use concentration is not to exceed 100 ppm

Undecyl alcohol 112-42-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Valencene 4630-07-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Valeraldehyde 110-62-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Valeric acid 109-52-4 When ready for use, the end-use concentration is not to exceed 100 ppm

γ-Valerolactone 108-29-2 When ready for use, the end-use concentration is not to exceed 100 ppm

Vanilla (Vanilla spp.) 8024-06-4 When ready for use, the end-use concentration is not to exceed 100 ppm

Vanilla extract (Vanilla spp.) 84650-63-5 When ready for use, the end-use concentration is not to exceed 100 ppm

Vanilla tahitensis, ext. 94167-14-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Vanillin 121-33-5 When ready for use, the end-use concentration is not to exceed 100 ppm

veratraldehyde 120-14-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Violet leaves absolute (Viola odorata L.) 90147-36-7 When ready for use, the end-use concentration is not to exceed 100 ppm

Waxes and waxy substances, rice bran, oxidized 1883583-80-9 None

Wintergreen oil 68917-75-9 When ready for use, the end-use concentration is not to exceed 100 ppm

Xylenesulfonic acid, sodium salt 1300-72-7 When ready for use, the end-use concentration is not to exceed 500 ppm

2,5-Xylenol 95-87-4 When ready for use, the end-use concentration is not to exceed 100 ppm

2,6-Xylenol 576-26-1 When ready for use, the end-use concentration is not to exceed 100 ppm

3,4-Xylenol 95-65-8 When ready for use, the end-use concentration is not to exceed 100 ppm

Ylang-ylang oils 8006-81-3 When ready for use, the end-use concentration is not to exceed 100 ppm

Zingerone 122-48-5 When ready for use, the end-use concentration is not to exceed 100 ppm

(b) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Dairy processing equipment, and food-processing equipment and utensils.

Table 2 to Paragraph (b)

Pesticide Chemical CAS Reg. No. Limits

Acetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 1200 ppm

Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide 68608-66-2 When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid

Butanedioic acid, octenyl- 28805-58-5 When ready for use, the end-use concentration is not to exceed 156 ppm

Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 None None

Calcium chloride 10043-52-4 When ready for use, the end-use concentration is not to exceed 17 ppm

n-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid None When ready for use, the end-use concentration is not to exceed 39 ppm

Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt 132-43-4 When ready for use, the end-use concentration is not to exceed 237 ppm

Ethylenediaminetetraacetic acid (EDTA), disodium salt 139-33-3 When ready for use, the end-use concentration is not to exceed 1400 ppm

FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705) 1934-21-0 None

C1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 When ready for use, the end-use concentration is not to exceed 1,000 ppm

D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, None

D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned) None

D-Gluconic acid, monosodium salt 527-07-1 When ready for use, the end-use concentration is not to exceed 760 ppm

Hydriodic acid 10034-85-2 When ready for use, the total end-use concentration of all iodide-producing chemicals is not to exceed 25 ppm of titratable iodine

Hydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 465 ppm

Iodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine

1-Octanamine, N,N-dimethyl- 7378-99-6 When ready for use, the end-use concentration is not to exceed 113 ppm

1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm

1-Octanesulfonic acid 3944-72-7 When ready for use, the end-use concentration is not to exceed 172 ppm

1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 297 ppm

1-Octanesulfonic acid, 2-sulfino- 113652-56-5 When ready for use, the end-use concentration is not to exceed 102 ppm

Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)

Peroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 315 ppm

Peroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 122 ppm

Phosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 34 ppm

Phosphoric acid 7664-38-2 None

Phosphoric acid, monosodium salt 7558-80-7 When ready for use, the end-use concentration is not to exceed 350 ppm

Potassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine

Propanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 297 ppm

Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 When ready for use, the end-use concentration is not to exceed 350 ppm

(c) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-processing equipment and utensils.

Table 3 to Paragraph (c)

Pesticide Chemical CAS Reg. No. Limits

Acetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 1,200 ppm

Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide 68608-66-2 When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid

Ammonium chloride 12125-02-9 When ready for use, the end-use concentration is not to exceed 48 ppm

[1,1′-Biphenyl]-2-ol 90-43-7 When ready for use, the end-use concentration is not to exceed 400 ppm

Boric acid, sodium salt 7775-19-1 None

Butanedioic acid, octenyl- 28805-58-5 When ready for use, the end-use concentration is not to exceed 156 ppm

Butanedioic acid, sulfo-, 1,4-dioctyl ester, sodium salt 1639-66-3 None

Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, cloudpoint of 90 - 100o C in 0.5 aqueous solution, average molecular weight (in amu), 3300 None None

Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 None None

Calcium chloride 10043-52-4 When ready for use, the end-use concentration is not to exceed 17 ppm

n-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid None When ready for use, the end-use concentration is not to exceed 39 ppm

3-Cyclohexene-1-methanol,α,α,4-trimethyl- 98-55-5 None

1-Decanaminium, N-decyl-N, N-dimethyl-, chloride 7173-51-5 When ready for use, the end-use concentration is not to exceed 200 ppm of active quaternary compound

Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt 132-43-4 When ready for use, the end-use concentration is not to exceed 237 ppm

Ethanol 64-17-5 None

Ethanol, 2 butoxy- 111-76-2 None

Ethanol, 2-(2-ethoxyethoxy)- 111-90-0 None

Ethylenediaminetetraacetic acid (EDTA), disodium salt 139-33-3 When ready for use, the end-use concentration is not to exceed 1400 ppm

Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt 64-02-8 None

Fatty acids, coco, potassium salts 61789-30-8 None

Fatty acids, tall-oil, sulfonated, sodium salts 68309-27-3 When ready for use, the end-use concentration is not to exceed 66 ppm

FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705) 1934-21-0 None

D-Gluconic acid, monosodium salt 527-07-1 When ready for use, the end-use concentration is not to exceed 760 ppm

Hydriodic acid 10034-85-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine

Hydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 1100 ppm

Hypochlorous acid, calcium salt 7778-54-3 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine

Hypochlorous acid, lithium salt 13840-33-0 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine and 30 ppm lithium

Hypochlorous acid, potassium salt 7778-66-7 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine

Hypochlorous acid, sodium salt 7681-52-9 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine

Iodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine

Magnesium oxide 1309-48-4 None

Methylene blue 61-73-4 When ready for use, the end-use concentration is not to exceed 0.4 ppm

Neodecanoic acid 26896-20-8 When ready for use, the end-use concentration is not to exceed 174 ppm

α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) maximum average molecular weight (in amu), 748 None None

α-(p-Nonylphenol)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles None None

α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) produced by the condensation of 1 mole p-nonylphenol with 9 to 12 moles ethylene oxide None None

α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene), 9 to 13 moles ethylene oxide None None

Octadecanoic acid, calcium salt 1592-23-0 None

9-Octadecenoic acid (9Z)-, sulfonated 68988-76-1 When ready for use, the end-use concentration is not to exceed 312 ppm

9-Octadecenoic acid (9Z)-sulfonated, sodium salts 68443-05-0 When ready for use, the end-use concentration is not to exceed 200 ppm

1-Octanamine, N,N-dimethyl- 7378-99-6 When ready for use, the end-use concentration is not to exceed 113 ppm

1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm

1-Octanesulfonic acid 3944-72-7 When ready for use, the end-use concentration is not to exceed 172 ppm

1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 312 ppm

1-Octanesulfonic acid, 2-sulfino- 113652-56-5 When ready for use, the end-use concentration is not to exceed 102 ppm

Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 9003-11-6 None

Oxirane, methyl-, polymer with oxirane, block, average molecular weight (in amu), 1900 106392-12-5 None

Oxirane, methyl-, polymer with oxirane, block, minimum average molecular weight (in amu), 2000 None None

Oxirane, methyl-, polymer with oxirane, block, 27 to 31 moles of polyoxypropylene, average molecular weight (in amu) 2000 None None

Oxychloro species (predominantly chlorite, chlorate and chlorine dioxide in an equilibrium mixture) generated either (i) by directly metering a concentrated chlorine dioxide solution prepared just prior to use, into potable water, or (ii) by acidification of an aqueous alkaline solution of oxychloro species (predominately chlorite and chlorate) followed by dilution with potable water None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)”

Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)”

2,4-Pentanediol, 2-methyl- 107-41-5 None

Peroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 315 ppm

Peroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 122 ppm

Phenol, 4-(1,1-dimethylpropyl)- 80-46-6 When ready for use, the end-use concentration is not to exceed 80 ppm

Phosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 34 ppm

Phosphoric acid 7664-38-2 None

Phosphoric acid, monosodium salt 7558-80-7 When ready for use, the end-use concentration is not to exceed 350 ppm

Phosphoric acid, trisodium salt 7601-54-9 When ready for use, the end-use concentration is not to exceed 5916 ppm

Poly(oxy-1,2-ethanediyl), α-[(1,1,3,3-tetramethylbutyl) phenyl]-ω-hydroxy-, produced with one mole of the phenol and 4 to 14 moles ethylene oxide None None

Potassium bromide 7758-02-3 When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen

Potassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine

Propanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 297 ppm

Quaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides 8001-54-5 When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound

Quaternary ammonium compounds, n-alkyl (C12-C14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound

Quaternary ammonium compounds, n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound

Quaternary ammonium compounds, di-n-Alkyl (C8-C10) dimethyl ammonium chloride, average molecular weight (in amu), 332 to 361 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 240 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound

Sodium-α-alkyl(C12-C15)-ω-hydroxypoly (oxyethylene) sulfate with the poly(oxyethylene) content averaging one mole None None

Sodium bromide 7647-15-6 When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen

Sodium iodide 7681-82-5 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine

Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 None

1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro- 2782-57-2 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine

1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, potassium salt 2244-21-5 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine

1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt 2893-78-9 When r use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine

1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3,5-trichloro- 87-90-1 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine

1,3,5-Triazine, N,N′,N″-trichloro-2,4,6-triamino- 7673-09-8 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine