GroundRules
40 CFR 428.65: Standards of performance for new sources.
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS
- PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY
- Subpart F—Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory
(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of raw material)
Oil and grease 0.42 0.15
TSS 0.80 0.40
pH (1) (1)
English units (lb/1,000 lb of raw material)
Oil and grease 0.42 0.0
TSS 0.80 0.4
pH (1) (1)
1 Within the range 6.0 to 9.0.
(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by § 428.65(a):
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of raw material)
Lead 0.0017 0.0007
English units (lb/1,000 lb of raw material)
Lead 0.0017 0.0007
Collected 2026-08-27T02:26:04Z. Source file · JSON