GroundRules
40 CFR 63.5360: How do I demonstrate continuous compliance with the emission standards?
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER C—AIR PROGRAMS
- PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
- Subpart TTTT—National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations
(a) You must demonstrate continuous compliance with the emission standards in § 63.5305 by following the requirements in paragraphs (a)(1) and (2) of this section:
(1) You must collect and monitor data according to the procedures in your plan for demonstrating compliance as specified in § 63.5325.
(2) If you use an emission control device, you must comply with § 63.982(a)(2) (subpart SS of this part) and collect the monitoring data as specified therein.
(3) You must maintain your compliance ratio less than or equal to 1.00, as specified at § 63.5330.
(b) You must report each instance in which you did not meet the emission standards in § 63.5305. These deviations must be reported according to the requirements in § 63.5420(b).
(c) You must conduct the initial compliance demonstration before the compliance date that is specified for your source in § 63.5295.
Collected 2026-08-27T02:26:04Z. Source file · JSON