Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR Table 2A to Subpart Ce of Part 60: Table 2A to Subpart Ce of Part 60—Emissions Limits for Small HMIWI Which Meet the Criteria Under § 60.33e(b)(1)

Pollutant Units (7 percent oxygen, dry basis) HMIWI emissions limits Averaging time 1 Method for demonstrating compliance 2
Particulate matter mg/dscm (gr/dscf) 197 (0.086) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part 60, or EPA Reference Method 26A or 29 of appendix A-8 of part 60.
Carbon monoxide ppmv 40 3-run average (1-hour minimum sample time per run) EPA Reference Method 10 or 10B of appendix A-4 of part 60.
Dioxins/furans ng/dscm total dioxins/furans (gr/109 dscf) or ng/dscm TEQ (gr/109 dscf) 800 (350) or 15 (6.6) 3-run average (4-hour minimum sample time per run) EPA Reference Method 23 of appendix A-7 of part 60.
Hydrogen chloride ppmv 3,100 3-run average (1-hour minimum sample time per run) EPA Reference Method 26 or 26A of appendix A-8 of part 60.
Sulfur dioxide ppmv 55 3-run average (1-hour minimum sample time per run) EPA Reference Method 6 or 6C of appendix A-4 of part 60.
Nitrogen oxides ppmv 250 3-run average (1-hour minimum sample time per run) EPA Reference Method 7 or 7E of appendix A-4 of part 60.
Lead mg/dscm (gr/103 dscf) 10 (4.4) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of appendix A-8 of part 60.
Cadmium mg/dscm (gr/103 dscf) 4 (1.7) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of appendix A-8 of part 60.
Mercury mg/dscm (gr/103 dscf) 7.5 (3.3) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of appendix A-8 of part 60.
1 Except as allowed under § 60.56c(c) for HMIWI equipped with CEMS.
2 Does not include CEMS and approved alternative non-EPA test methods allowed under § 60.56c(b).

Where this section sits in the code

Title 40—Protection of Environment
CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER C—AIR PROGRAMS
PART 60—STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES
Subpart Ce—Emission Guidelines and Compliance Times for Hospital/Medical/Infectious Waste Incinerators

Pollutant Units (7 percent oxygen, dry basis) HMIWI emissions limits Averaging time 1 Method for demonstrating compliance 2

Particulate matter mg/dscm (gr/dscf) 197 (0.086) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part 60, or EPA Reference Method 26A or 29 of appendix A-8 of part 60.

Carbon monoxide ppmv 40 3-run average (1-hour minimum sample time per run) EPA Reference Method 10 or 10B of appendix A-4 of part 60.

Dioxins/furans ng/dscm total dioxins/furans (gr/109 dscf) or ng/dscm TEQ (gr/109 dscf) 800 (350) or 15 (6.6) 3-run average (4-hour minimum sample time per run) EPA Reference Method 23 of appendix A-7 of part 60.

Hydrogen chloride ppmv 3,100 3-run average (1-hour minimum sample time per run) EPA Reference Method 26 or 26A of appendix A-8 of part 60.

Sulfur dioxide ppmv 55 3-run average (1-hour minimum sample time per run) EPA Reference Method 6 or 6C of appendix A-4 of part 60.

Nitrogen oxides ppmv 250 3-run average (1-hour minimum sample time per run) EPA Reference Method 7 or 7E of appendix A-4 of part 60.

Lead mg/dscm (gr/103 dscf) 10 (4.4) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of appendix A-8 of part 60.

Cadmium mg/dscm (gr/103 dscf) 4 (1.7) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of appendix A-8 of part 60.

Mercury mg/dscm (gr/103 dscf) 7.5 (3.3) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of appendix A-8 of part 60.

1 Except as allowed under § 60.56c(c) for HMIWI equipped with CEMS.

2 Does not include CEMS and approved alternative non-EPA test methods allowed under § 60.56c(b).

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection