40 CFR Table 2 to Subpart VVVV: Table 2 to Subpart VVVV—Emission Limitations for New Large Municipal Waste Combustors
Where this section sits in the code
- Title 40—Protection of Environment
- CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
- SUBCHAPTER C—AIR PROGRAMS
- PART 60—STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES
- Subpart VVVV—Standards of Performance for Large Municipal Waste Combustors
For the air pollutant If your affected facility is a new large municipal waste combustor, you must meet this emission limit, corrected to 7 percent oxygen a
Particulate matter 5.1 mg/dscm.
Opacity 10 percent opacity (6-minute block average).
Cadmium 2.3 ug/dscm.
Lead 23 ug/dscm.
Mercury 32 ug/dscm or 85 percent reduction by weight.
Sulfur dioxide 14 parts per million by volume dry basis or 79 percent reduction by weight or volume (daily 24-hour geometric average).
Hydrogen chloride 7.2 parts per million by volume dry basis or 98 percent reduction by weight or volume.
Dioxins/furans 11 nanograms per dry standard cubic meter (total mass).
Nitrogen oxides 50 parts per million by volume dry basis (daily 24-hour arithmetic average).
a Measured at the combustor outlet in conjunction with a measurement of oxygen concentration. CEMS data during warmup, startup, and shutdown, as defined in this subpart, are not corrected to 7 percent oxygen, and are used as measured. The averaging times are specified in greater detail in § 60.5940.
Collected 2026-08-27T02:26:04Z. Source file · JSON