Federal regulations · Through 2026-08-25 · Newer source version available

40 CFR Table 5 to Subpart JJJJJJ of Part 63: Table 5 to Subpart JJJJJJ of Part 63—Fuel Analysis Requirements

As stated in § 63.11213, you must comply with the following requirements for fuel analysis testing for affected sources:
To conduct a fuel analysis for the following pollutant . . . You must. . . Using . . .
1. Mercury a. Collect fuel samples Procedure in § 63.11213(b) or ASTM D2234/D2234M a (for coal) or ASTM D6323 a (for biomass) or equivalent.
b. Compose fuel samples Procedure in § 63.11213(b) or equivalent.
c. Prepare composited fuel samples EPA SW-846-3050B a (for solid samples) or EPA SW-846-3020A a (for liquid samples) or ASTM D2013/D2013M a (for coal) or ASTM D5198 a (for biomass) or equivalent.
d. Determine heat content of the fuel type ASTM D5865 a (for coal) or ASTM E711 a (for biomass) or equivalent.
e. Determine moisture content of the fuel type ASTM D3173 a or ASTM E871 a or equivalent.
f. Measure mercury concentration in fuel sample ASTM D6722 a (for coal) or EPA SW-846-7471B a (for solid samples) or EPA SW-846-7470A a (for liquid samples) or equivalent.
g. Convert concentrations into units of lb/MMBtu of heat content
a Incorporated by reference, see § 63.14.

Where this section sits in the code

Title 40—Protection of Environment
CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER C—AIR PROGRAMS
PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
Subpart JJJJJJ—National Emission Standards for Hazardous Air Pollutants for Industrial, Commercial, and Institutional Boilers Area Sources

As stated in § 63.11213, you must comply with the following requirements for fuel analysis testing for affected sources:

To conduct a fuel analysis for the following pollutant . . . You must. . . Using . . .

1. Mercury a. Collect fuel samples Procedure in § 63.11213(b) or ASTM D2234/D2234M a (for coal) or ASTM D6323 a (for biomass) or equivalent.

b. Compose fuel samples Procedure in § 63.11213(b) or equivalent.

c. Prepare composited fuel samples EPA SW-846-3050B a (for solid samples) or EPA SW-846-3020A a (for liquid samples) or ASTM D2013/D2013M a (for coal) or ASTM D5198 a (for biomass) or equivalent.

d. Determine heat content of the fuel type ASTM D5865 a (for coal) or ASTM E711 a (for biomass) or equivalent.

e. Determine moisture content of the fuel type ASTM D3173 a or ASTM E871 a or equivalent.

f. Measure mercury concentration in fuel sample ASTM D6722 a (for coal) or EPA SW-846-7471B a (for solid samples) or EPA SW-846-7470A a (for liquid samples) or equivalent.

g. Convert concentrations into units of lb/MMBtu of heat content

a Incorporated by reference, see § 63.14.

Collected 2026-08-27T02:26:04Z. Source file · JSON

Browse this collection